System Restore - Administrator Password Doesn't Work
Feb 5, 2006
I had probs, so I did a system restore. When rebooting after that, it asked me for passwords to get in, both my account and Guest. Niether of them should have actually had passwords on them, therefore I can't get into the pc now. Tried everything, including using Administrator and password blank, still doesn't work. So on some peoples advice, I decided to do a Xp reinstall, choosing upgrade instead of formatting (so I don't lose everything). When going through that process, it gets to the point where I choose R for repair. It then askes which version to install on, so I say option 1 - Windows. THAT is when more probs come in. It now asks for the Administrator password. I've never given one in the past, and if I have then it's one of two options - either my surname or the word 'computer', so after trying both of those, and also trying a blank password, it then restarts the computer because I've given 3 incorrect passwords. The point is that there IS NO password!! I can't understand why it's asking for one??!! This is really getting me down.
View 4 Replies
ADVERTISEMENT
May 20, 2007
Very recently I managed to open a .exe file which contained a rather nasty strain of something which has come back to bite me. When I start up Windows XP SP2, I get an error message telling me that "Generic Host Process for Win32 Services has encountered a problem and needs to close." In addition iexplore.exe starts up in the task manager on every startup, without the browser launching and my baseline RAM usage is 80MB or so higher than normal. Now I have blocked iexplore.exe with my firewall, I have scanned my computer with Norton internet security 2007, Spybot S&D, Adaware SE and I have deleted the .exe file from which the infection originated. Unfortunately, though some minor infections were discovered, the problem at hand remains unresolved. MSConfig does not show anything about iexplore.exe opening up on startup., or any other program I do not want for that matter. I am at my wits end, and I hope someone here can figure out what I cannot....
View 14 Replies
View Related
Oct 30, 2007
My computer encountered:STOP: c0000218 {Registry File Failure}
I've tried using the Windows XP CD to use the recovery tool, but it just reboots whenever I try
View 14 Replies
View Related
Sep 29, 2007
Windows XP Home : My desktop boots only in safe mode and system restore fails. Last known good configuration doesn't work too. Normal boot falls in a restart loop. Can somebody help, please ? Problem created by malware (trojans,worms,etc).I use Avast antivirus.
View 8 Replies
View Related
Apr 29, 2006
Cannot remember my windows XP administrator password. Is there any way i can back into it and change the password or make it so i no longer need a password.
View 22 Replies
View Related
Aug 26, 2005
On my laptop I have forgotten the password. And I can not log in into windows. I have tried all passwords that I could think of but I can't log in. Is there any possible way to access my computer again?
View 6 Replies
View Related
Jul 29, 2005
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
View 4 Replies
View Related
Feb 13, 2005
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
View 7 Replies
View Related
Apr 8, 2005
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
View 13 Replies
View Related
Nov 26, 2006
My system restore is enabled but no matter what bold restoration point I choose I am told system can't be restored to that date, choose another restoration point. I do, the system shuts down and restarts and I get the same message.
View 7 Replies
View Related
Mar 10, 2005
Installed Norton Internet Security 2005 and now, whenever I try and do a system restore it says "System restore encountered a problem and has to close". It does this all the time, even in safe mode. Symantec has mentioned that I should turn off NIS2005 and try system restore. If it then works it is a Microsoft issue. I have been onto the Microsoft websites and they do not mention how to repair or reinstall system restore
View 3 Replies
View Related
Mar 31, 2006
I just tried to do a system restore using the built in windows tool. However, everytime I go to the screen, the area where the little calender that has all your restore points, is gone and blank. I have tried restarting; nothing. I have tried making a new restore point and it doesn't show up. Refer to the screen shot I took to describe what I mean.
View 11 Replies
View Related
Oct 17, 2008
Normally I reinstall windows when I run in to this problem, 9 times out of 10 caused by a virus. This time I decided to try and restore policies and get rid of the virus by hand... but I couldn't find a guide telling how to get these policies back! Has anyone created a guide or done this before? I figure if the rights can be taken away, they surely can be given back.
View 4 Replies
View Related
Jan 15, 2006
My account on my computer (Win XP Pro SP2) is an Administrator account. Over a year ago, I got tired of entering my password because I an the only person that uses this computer. I did something so it would boot without the password screen appearing ( I don't remember what, but I think I left the password line blank).
Since the computer boots directly to my account, I am never prompted to enter a password; but if I use Power Options (and the computer sleeps), it wakes to the login screen and I cannot reenter my account. I have to reboot. On the login screen, I have tried leaving the password blank and entering every password I use, but I get an Invalid Password response.
View 16 Replies
View Related
Jun 8, 2006
I am trying to use the system restore function on windows XP, but every time i select a restore point and the system reboots, it says that the restoration was incomplete and "no changes have been made." I have tried multiple restore points. Microsoft.com suggested that i verify that the task manager, WMI, and system restore services were running, and they are. I also tried disabling my antivirus program, but the same thing happens.
View 9 Replies
View Related
Jan 15, 2008
Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem.
The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.
View 2 Replies
View Related
Aug 19, 2005
Last Saturday was the last time that System Restore worked for me. Counterspy set a restore point before doing its thing. Since then I havn't been able to create a restore point all week. I'm running XP home edition.This is what pops up when I try to create a restore point. System Restore is unable to create a resore point. Please restart the
computer, and then run System Restore again. Restarting will not help
View 5 Replies
View Related
Nov 5, 2008
I reset my Windows after an apparent virus and now cannot get back to restore my system. The e-mail does not work and I would like to restore my files (its my last semester of school). System Restore does not work.
View 2 Replies
View Related
Apr 26, 2007
My system restore has not worked in XP for some time now and I have tried a XP repair and that did not do it A tech told me to remove the monitoring from the drives than reboot tehn put monitoring back on
View 10 Replies
View Related
Sep 25, 2008
Over the last two weeks, my XP started to take longer and longer to shut down. Now, it doesn't and I have to manually press the startup/shut down button.
XP is 2002 version; SP ;, 2.3 GHz CPU; 2.29 GHz and 0.99 GB RAM.My virus/security suite is Zone Alarm.I tried to use System Restore and though it does shut and restart the computer, system restore tells me it could not restore the computer.
View 14 Replies
View Related
Sep 18, 2005
Was having a problem with the computer, doing weird things so I thought that I might go back and do a restore from an earlier point to see if it solved the problem. Anyway, went to earlier point, restored sort of, after it did everything, it told me it could not restore to that point and that nothing was done. I went to another restore point further back, same message, was not installed at the restore point, current settings are intact. Did this 2 more times, same results. I have made restore points along with the ones the systme makes. None of them works.
View 2 Replies
View Related
Apr 9, 2006
I found that i couldnt go to: start-"all programs" and have it work. when clicking all programs it does nothing. then, i remembered a dvd triedinstalling "hot llama" and it was stopped in the middle. I think that may be the issue, tried to do system restore and that wont restore to any date.
View 5 Replies
View Related
May 2, 2006
Literally every single time I try to use it it doesnt work. always says restortion incomplete. I have it set to use the max disk space. I even tried formatting the hd, reinstalling windows, and then the I tried using it and it didnt even work then.
View 6 Replies
View Related
Aug 8, 2005
I cannot create a system restore point, nor is System Retore creating any automatically. I tried rebooting my system, using the check/uncheck box in system properties, using the "Run" line, and trying to run System Restore in Safe Mode. I also tried copying the "framedyn.dll" from the windowssystem32wbem directory to the Windowssystem 32 directory (I don't know if it's supposed to be there or not. The only option I have
left that I know of is to reinstall Windows XP.
View 12 Replies
View Related
Jul 28, 2007
My PC began looping from the Dell splash screen to the Windows start-up screen, then clicking off and repeating....over and over. I tried several things and couldn't even get System Restore to work. Finally, after several well-intended friends had me fooling with my command prompts (I'm sure that was a mistake), I decided to just reinstall Windows XP. Well, now it's reinstalled, but I can't connect to the internet, none of my drivers are recognized and nothing is showing up on my desktop, When I go into My Computer and look on my hard drive, all of my programs and files are still there....but the operating system doesn't seem to know where to find them. I have a desktop Dell Dimension 4600.
View 1 Replies
View Related
Jul 29, 2007
I am trying to use system restore, but it does not work. I select a previous system restore point to restore to everything works fine until the computer reboots. Then its says system reboot did not work, nothing was changed and try another restore point.
View 3 Replies
View Related
Oct 16, 2005
my pc (XP) will not boot or close up clean. The only way I can boot is using safe mode. Is there a better way to fix boot problems without doing a complete sys recovery? The instructions for complete sys recovery is pretty vague it seems to me.
View 8 Replies
View Related
Mar 2, 2007
I am running an HP Pavilion a1624n with Win XP Media Center 2005, running on a wireless network with one other desktop and one laptop. I also use Firefox browser and have NAV 2007. I have had this PC for about two months and the first time or two that I tried System Restore, it worked OK, Now, (with System Restore turned ON),it has gone downhill and when I try to run it, it goes through the process but at the end I get the error message "your computer cannot be restored to 00/00/00. No changes have been made." It does not make the automatic 24 hour restore points, even though it does make restore points when new programs are installed and manual restore points can be made. It works fine in Safe Mode using the rstrui.exe command. This latest problem started yesterday.
View 11 Replies
View Related
Jan 30, 2010
I recently have had problems with my computer slowing down after clicking on programs such as Firefox. It takes about 40 seconds for the hourglass to go away and then the program will finally load. Other programs also. I have been using some anti-virus and spyware programs thinking I had a virus or spyware , such as Spyware Begone. It found a spyware and deleted it. I tried to use System restore and it only showed one restore point in January (the 27th when I first tried Spyware Begone), but would not restore to that date. I could not get Restore to go back to December. System Restore is on and running. Any suggestions would be helpful. I also used System Restore in Safe Mode thinking that would help, but it would not restore to the 27th. System Restore works, but after completing it the message says "could not restore to the 27th).
View 8 Replies
View Related
Sep 10, 2005
I have tried to restore my system to the first date available. xp always fails to load and I have to go back to "start windows from the last good configuration" – I started in safe mode, disconnected from the internet- scanned with NAV cleaned a bunch of junk off, scanned with Spybot S&D – cleaned some more junk off tried to restore to day one – same problem - go back to "start windows from the last good configuration"- several hours wasted and I am going crazy. This may be a virus problem
View 5 Replies
View Related
Sep 10, 2009
Recently I found System Restore not working. It would neither restore to an earlier time nor create a new restore point. I tried doing a virus scan using Avast, rebooting, checking that it is (supposed to be) running and safe mode.Disconnecting from the Internet and turning off antivirus and firewall also made no difference. I also turned it off and on again. I noticed that initially it said it was monitoring drives C, D & E but after turning on again it only showed drives C & D. These drives are all partitions on my HD.On checking E I found that it had no file system and was advised to format it. On attempting this I got Format did not complete successfully.I also attempted to Defrag and got Disk Defragmenter could not start.
View 1 Replies
View Related
