I just tried to do a system restore using the built in windows tool. However, everytime I go to the screen, the area where the little calender that has all your restore points, is gone and blank. I have tried restarting; nothing. I have tried making a new restore point and it doesn't show up. Refer to the screen shot I took to describe what I mean.
View 11 RepliesI seem to be having problems as of late with my computer. for the past 10-15 days when I startup my computer sometimes Windows will load and other times it won't. I don't even get the privledge of the blue screen of death, but rather then brown green screen saying Windows failed to start. Usually it takes 3-4 tries before Windows successfully loads, but it seems to be getting progressively worse. I haven't installed any new software or modifiied any configuration details within the last 30days. I even tried a system restore point of about a month ago and I continue to have this problem.
I threw in my XP cd for a re-install but it says my version of windows is newer then the one on the cd, and after thinking about it, if this is a serious problem, having to re-install windows, all of my drivers for my 3rd party hardware and then update everything might not be worth the effort if I can just get a new computer. I have been pondering for a while of purchasing a mac for my next round of computer purchases so if it comes down to that, hardware and software costs from my current system are not a major issue. So is my computer just slowly dying like a used car, or what might be the problem?
If someone downloads and runs a trojan and then uses system restore to back
to a system restore point prior to running the virus, is that computer still
infected?Nocturnal http://www.spywaretalk.org
I have Windows XP. WHen I try to use "system restore", I keet getting a message that say that I cannot restore to the restore point I chose. I followed the instructions, and only choose restore points that are bolded.
View 7 Replies View RelatedIt's clear that System Restore does not simply put down a given Registry of a Restore Point instead of one in existence. Before this System Restore examines for compatibility the coming Registry and established programmed. Sometimes System Restore adjusts them, makes some corrections and informs user about this. But in a complicate situation System Restore cannot make corrections and refuses to put Restore Point down.Where can I read about:
1) What does System Restore control specifically?
2) In which situation specifically does System Restore refuse to put Restore Point down?
3) Is it possible to exclude these testings from System Restore?
Whenever I try to create a restore point, Windows keeps telling me that it cant, saying "System Restore Is not able to create a restore point.Please restart the computer and run System restore again." I've done this and it doesn't work. I've also checked to see if the Service is running normally, and that is running perfect.
View 12 Replies View RelatedI'm using Windows XP Pro Home Edition (Service Pack 2) on an HP Pavilion a250y desktop. I have noticed recently that there are no system restore points on my computer. A check of the Event Viewer seems to indicate that my computer has unsuccessfully tried to create five system restore points in the past four days. If I right-click on any of the unsuccessful system restore attempts listed to view the error properties and then click on the hyper link associated with the error properties, I get a message indicating that System Restore will automatically restart if I manually create a restore point. However, when I try to do this, I get the message contained in the subject line. Does anyone know of a way to fix this problem?
View 3 Replies View RelatedWhen trying to create a restore point the following dialog box is produced.System Restore is not able to create a restore point. Please restart the computer, and then run System Restore again''. And yoy get the message again after rebooting. Also you cannot retore from a restore point, the calendar only shows the current month.
View 12 Replies View RelatedWhen I attempt to run System Restore to create a restore point I get the following error message:"System Restore is not able to create a restore point. Please restart the computer, and then try System Restore again." But restarting the computer does not solve the problem. Also, when I attempt to restore to an earlier date/time and click Next to confirm nothing happens.System Restore doesn't work in Safe Mode either. I also tried Revert to time when last worked in the boot option menu.As far as I know these problems occurred after Oct. 10 (the last time I created a good Restore Point) and this morning when I attempted to create a restore Point.I have run currently updated AVG 7, S&D, Adaware, Ewido, and MS Anti-spyware and came up clean.
View 5 Replies View RelatedTried to do a system restore today and apparently no restore points were available. I thought XP automatically creates restore points. Is there a setting somewhere that I have to change?
View 11 Replies View RelatedI am trying to create a fresh system restore point. (Well all the previous restore points are already deleted).I type a name a restore name into the box and then this error message pops out.System restore is not able to create a restore point. Please restart your computer, and then run System Restore again.I checked in my event viewer for system restore related errors(sr and srservice). It showed up errors in the following categories(4 errors in source sr) all with event id 1.The System Restore filter encountered the unexpected error '0xC0000001' while processing the file '' on the volume 'HarddiskVolume1'. It has stopped monitoring the volume.The System Restore filter encountered the unexpected error '0xC0000034' while processing the file '_filelst.cfg' on the volume 'HarddiskVolume1'. It has stopped monitoring the volume. The System Restore filter encountered the unexpected error '0xC0000098' while processing the file '' on the volume 'HarddiskVolume1'. It has stopped monitoring the volume.The System Restore filter encountered the unexpected error '0xC0000098' while processing the file on the volume 'Hard disk Volume1'.It has stopped monitoring the volume. This is what i have tried out:Turned off all the system restore on all drives, restarted the computer and then turned back on, but to no avail. I tried to create a restore point from the safe mode but it shows only to "restore the computer back to an earlier time" and no option to create a restore point.
View 9 Replies View RelatedI did not realise it but I had disabled my windows protection which automatically creates system restore points. Recently I managed to infect my OS with a rally of malware - one particularly nasty was Antimalware Doctor. I installed Avira for antivirus, comodo for firewall and spybot for additional protection (perhaps a little paranoid but I was kicking myself for being to lax up to that point). I try to avoid AV programmes, as nothing ever seems to work properly once they've been installed (see below) and they just interfere with every single application you try to install and messing with their function too.Avira and Comodo started messing with my HP printer/scanner/copier software - every time I booted a Windows Installer window popped up looking for the installation disc for a damaged image, and would not go away. I inserted the disk but it did not resolve the issue. So I deleted all the files, removed them from the registry and prepared to install it from scratch.
View 13 Replies View RelatedI went to do a system restore in hopes that I would be able to restore my computer to the last restore point that was made in August which was either Thursday or Friday. This was only a few days ago However, I couldn't restore my pc to any restore point cause it won't allow me to go back to the previous month My question is.Is there anyway to get the System Restore to go back to the previous month?
View 1 Replies View RelatedIf I restore back to an earlier point (Xp) all programs after that point will be gone AFAIK. Will any downloaded videos, mp3s etc gone as well
View 3 Replies View RelatedHello, I currently have a problem with my system restore. It has been this way for as long as I can remember. It just doesn't work. I cannot create a system restore point, it does not allow me, it fails to make one every time I try. There are NO system restore points. I followed this guide http://support.microsoft.com/default...;EN-US;q313853 and my calendar is blank and doesn't show anything. I have tried turning off system restore, restarting and turning it back on....
View 10 Replies View Relatedmy pc will not restore to an earlier restore point. please help
View 7 Replies View RelatedI need to restore to an earlier version on my computer as im having problems with Alias Maya Software (whole different issue posted in Multimedia Section - please take a look) but when i go to restore to an earlier point this message comes up
Changes made to drive(s) J: after this point cannot be reversed because the drive was either excluded from System Restore monitoring, or was turned off or removed
I keep getting this message: "wmi has encountered a problem and needs to close." I've tried everything I can think of to get rid of it including:1. System Restore to a previous point2. Stopped Windows Management Instrumentation service and set it to MANUAL star 3. Stopped Windows Performance Adapter service and set it to MANUAL start4. Searched registry for entries that could/should be deleted (didn't find the ones I expected to see.)5. General cleanups including Registry Mechanic detect and repair. Norton Antivirus scan. Microsoft AntiSpyware scan / repair. Spybot Search and destroy scan / fix. Spyware Blaster update and enable all protection.
View 3 Replies View RelatedIf someone downloads and runs a trojan and then uses system restore to back
to a system restore point prior to running the virus, is that computer still
infected?Nocturnal http://www.spywaretalk.org
Probably once a day my PC will shut off and then restart. I really need this PC to be reliable and stay up.I have tried a memory test to see if it was that and it came up ok. I was also told it could be to do with drivers for hardware.If anyone could give me some advice I would REALLY appreciate it.
View 13 Replies View RelatedIf i was to install service pack 2, via the disc i have, and i dont like what it has done to my computer, will i be able to refer back to a System Restore Point i created before installation?
View 3 Replies View RelatedI'm using Win XP Pro SP3. When my files in "My Documents" outgrew my hard drive's capacity a while back I bought a new hard drive and decided to move my "My Documents" onto the new F: drive, leaving everything else on the original hard drive. It seemed like the simplest solution to my problem at the time. The situation does create a few syntax problems revolving around the question "When is the 'My Documents' folder not really the 'My Documents' system folder?" Most of the time I don't have any problems with the arrangement, but there are a couple of anomalies. At present my command line environment variables do not have any easy way to point to "My Documents" because (for example) %userprofile%My Documents points to the folder on c: that used to be the 'My Documents' system folder rather than to the current location of the system folder.
That is not usually a big deal but it may be related to the more frequent problem. A few ill-behaved programs expect to find and store files in %userprofile%My Documents (which is on C: drive) rather than in the actual system folder "My Documents" on F: which makes it harder to find these files when I search for them. Just to 'simplify' the situation I thought about setting a reparse point in the old "My Documents" folder ( %userprofile%My Documents ) that points to the actual system folder (which is F:My Documents ) Tinkering with settings like this has potential to break things in unexpected ways so I thought I'd ask whether there are any obvious problems with the 'solution'. Or are there better ways to keep the user documents on a second hard drive?
System Restore does not show calendar. Therefore no indication is available of restore dates. I cannot use system restore without calendar showing.
View 13 Replies View Relatedlast night i ran a system restore (to two day prior), i had left the computer, awhile later came back, logged in and waited for windows to start up, the wallpaper of my desktop came up but nothing else, i waited about 20 minutes before leaving again for awhile, returning to the computer in about a half hour. after waiting an hour+ with the computer doing nothing
View 1 Replies View RelatedI had probs, so I did a system restore. When rebooting after that, it asked me for passwords to get in, both my account and Guest. Niether of them should have actually had passwords on them, therefore I can't get into the pc now. Tried everything, including using Administrator and password blank, still doesn't work. So on some peoples advice, I decided to do a Xp reinstall, choosing upgrade instead of formatting (so I don't lose everything). When going through that process, it gets to the point where I choose R for repair. It then askes which version to install on, so I say option 1 - Windows. THAT is when more probs come in. It now asks for the Administrator password. I've never given one in the past, and if I have then it's one of two options - either my surname or the word 'computer', so after trying both of those, and also trying a blank password, it then restarts the computer because I've given 3 incorrect passwords. The point is that there IS NO password!! I can't understand why it's asking for one??!! This is really getting me down.
View 4 Replies View RelatedVery recently I managed to open a .exe file which contained a rather nasty strain of something which has come back to bite me. When I start up Windows XP SP2, I get an error message telling me that "Generic Host Process for Win32 Services has encountered a problem and needs to close." In addition iexplore.exe starts up in the task manager on every startup, without the browser launching and my baseline RAM usage is 80MB or so higher than normal. Now I have blocked iexplore.exe with my firewall, I have scanned my computer with Norton internet security 2007, Spybot S&D, Adaware SE and I have deleted the .exe file from which the infection originated. Unfortunately, though some minor infections were discovered, the problem at hand remains unresolved. MSConfig does not show anything about iexplore.exe opening up on startup., or any other program I do not want for that matter. I am at my wits end, and I hope someone here can figure out what I cannot....
View 14 Replies View RelatedWhen I try to restore my computer no restore points are saved I have the system restore set to it's maximum capacity, there is plenty of space. I tried to create my own restore points and received message system restore is not able to create restore point please restart the computer and then run system restore again. I did and got same message again. Can someone please tell me how to rectify this problem.Was having trouble with screen saver which refused to start but have now disabled ehtray and screen saver is now working again.
View 14 Replies View RelatedI need to restore my computer to an earlier restore point.when i try to change the date it won't let me.I wanted to go to 10/4/05 but when i click on the number 4 it does not do anything.I am using windows xp home edition.
View 3 Replies View Relatedand after a few days of my computer not allowing me to open certain programs, I thought that a virus may have slipped through Norton. So I did a System Restore to the first of the month. But when my computer restarted, Windows opens but only my wallpaper will show up...no icons, no toobar and it won't allow me to click on anything or open any further
View 7 Replies View RelatedI am trying to start a powerpoint slide show in the second monitor but i couldn't do this. Is there any way to do this.
View 4 Replies View RelatedI receive the message "Cannot restore to an earlier restore point, no changes have been made to your computer." I checked the Forums and found a similar case where the recommended action was to try Tip #1795 on WorldStart.com.com. I tried this and it did not work.
View 14 Replies View Related