I'm working on a Dell Poweredge server that has Windows Server 2000 .. It has become very slow so I added another gig of RAM to it which helped some.. I went to defrag and the Bar was solid red. Windows defrag won't touch it so I tried installing Diskeeper's new 2007 version only to find out it wasn't compatable with 2000 server. Anyone know of a good program that will work on 2000 server? Thanks
View 6 RepliesDoes anyone know a link that enables me to download a tool to check to see if my computer will run Windows Server 2000.
View 7 Replies View RelatedCould U Plz Tell Me How To Connect Ibm System X 2000 Based Server And Xp Nodes Through 2000 Domain So When I Give Password In The Nodes And Enter It Gets Connected To The Servers Domain
View 1 Replies View RelatedThe procedure is as follows:
Right-click databases -> Restore Database
I mark 'from device', click the '...' button & select 'File' in the dropdown, then brows to the file itself. Under 'select the backup sets to restore' I check the only checkbox there, then in the 'To Database' I select the name of the database in the file (a new DB name appears there as you select the file).
Am I right in thinking that they are both pretty similar except that server has support for multiple processors and extra network related tools and facilities. The reason I ask is that if a piece of software works on Windows 2000 server, is it extremely likely that it will work on Windows 2000 professional too? As a bit of background information: I work for a small company which supplies temperature monitoring equipment which needs to be networked. I've been told that it has been tested on Windows 2000 server but not on Window 2000 professional.
View 1 Replies View Relatedthe laptop is very slow. how slow? it takes 14.5 min to boot up.it takes 4 min to get the outline of a window when i click on IE and 3 more min to get the home page up. ( Google.com) it is like this for any other app i try to open. ( the Start button takes about 35 sec to open) it is the same when connected to my lan or when it is a stand alone.So, i did a format and a re install, not once, but twice. i continue to run AVG scans, and spyware scans they always come out clean. And the laptop is still the same.
the laptop is: a P M 1.7 Gig with 256 meg of ram running windows 2000 pro. (format is NTFS) i have a P III 500 gig with the same ram that runs rings around this laptop.
did a mem test 86 and it passed all tests. ran Sea tools (all tests) passed.
I need IIS.dl_ ISS.in_ from a windows 2000 CD or windows 2000 server CD, a trial CD will be find. They're in the I386.
View 7 Replies View Relatedi wanted to know how to change the product key for windows 2000 server
View 2 Replies View Relatedi am running server 2000 in my home as and server. i just recently put it in. sense i have put it in i have not been able to run my backups for all of my stuff. have a drive that i call apps on my server and it has all my setups and other stuff. when the backups start copying from that they lockup on files it seems some what random on the file although now that i am thinking more on it i seem to rember seeing the same files over and over. when it lock up it locks up the whole computer. and my backups are run by a batch script
View 7 Replies View RelatedI have evaluation copy of 2000 server on computer for training purposes One thing I cannot do is uninstall it!! The machine is useless to me with it on and I just want to return to an operating system I can use
View 1 Replies View RelatedI have enabled ftp server on my windows 2000 server/ISA Server.Our internet connection is ADSL with US robotics router running. I configured the ISA Server to allow the ftp requests. I tested the connection using web browser as well as cute ftp and I have no problem in connecting by entering static IP Address from web browser and cute ftp.
The objective for ftp server is to share files with our clients. Now the problem is i can connect by entering my static ip address but not the internal domain name of my windows 2000 server which is tecnoserve.dxb. I dont want to give my clients our Static ip address to connect our ftp server.
I have about8 exclaimation points under other devices in computer management while tring to instal win 2000 server. They are ethernet controller,3 pci device, pci serial port, usb controller, unknown device, video controller(vga compapible). i am trying to install this on a intel pentium 4 cpu at compatible
View 14 Replies View RelatedI have two computers, one with windows 2000 advanced server just installed, the other with windows xp pro sp2. I want to have a domain with 3 accounts: administrator (of course, me) and two other users. I want it so if I change my desktop on one pc, I can log off that pc and walk over to my other computer and log on and theres my new desktop. I just want the pc running xp pro to receive all the rules, settings, desktops, etc from the server.
View 2 Replies View RelatedLooking for the correct chipset for my mobo. It is a via tech Model is vt8501 apollo mvp system controller. I am looking to install a win 2000 server.
View 14 Replies View Related(I've already posted this message in Business Applications, but it only got 6 hits, and I'm sure 3 of them were me, so I'm gonna see if it does better here)
I work for a small Charity, which unfortunately is having some funding problems. This is very bad timing, as we have a backup problem too.I know throwing money at the issue would solve it, but that is not currently an option.
I have a win2k server with an adaptec 2410 raid controller with sata drives.
Today I get a blue screen that says inaccessible_boot_drive when I try to restart the server. I was going to haul it down to my local computer shop as I need it back up quickly.
I set-up a FTP site on Windows 2000 server so two remote users could access files on the Server. I have a static IP address for the site. These two people who need access previously had static IP Address to the server. They would type in a web site address which would then request an IP Address. They then logged on the site that way with a username and password. They let the hosting service expire for the web site and stopped paying for the static IP Address.Now my friends want to to have access to the Server again.I set up a FTP Site on the Windows 2000 Server. First time for me doing that. The Properties of the FTP site can be viewed by clicking on the attached web site.I can ping the Static IP Address successfully.
View 10 Replies View RelatedI have an older server, manufacturer unknown, that was running Windows 2000 server with all the latest service packs. It was being used as a Citrix server in our environment. The server was put in before my time here and I saw that somebody had changed the C: to a M:We have since taken the server off the network and plan on using it as an internal file server. For some reason, I am unable to install a clean copy of Windows 2000 or 2000 advanced server on it.I have tried to wipe the disk clean with DBAN and KILLDISK and WIPEDRIVE but all just hang on the system.I have a Windows 98 startup disk that I was able to boot from and ran an FDISK.I was also able to format the C:.When I am in DOS and switch to the C: I type in Dir and it comes up with no files found.I checked the partitions in FDISK and it shows the Primary Partition as being active and shows the correct amount of disk space. Whenever I try to install Windows 2000 Advanced Server the system goes through the process of checking the files and gets to the point to begin installation. When I try to install the operating system, the next screen comes up saying it cannot find the hard drive.This is very frustrating as I know the C: is there as I can see it from DOS and it looks to be configured properly.
View 14 Replies View Relatedthere are a number of reasons why this might fail including the Directory Security settings within IIS, whether the web server is running on a different machine from the sql server, the connection string within the asp page, etc. What is the db connection string being used in the page
View 3 Replies View RelatedI am trying to configure a 2000 server in an active directory domain environment and have a simple question.
I have several accounts and would like to configure them to be administrators on the local workstations, but not a domain admin. I can't quite figure this out. It'd be nice to be able to do this all from the server. I'm assuming it's a domain policy.
I'm really stumped. My computer was moving slow so I decided to do a possible defrag.When I clicked analyze I got the message that a disk check had been scheduled and to do that first. I had not scheduled a disk check. I went ahead an scheduled one and restarted my computer and then all.
View 1 Replies View RelatedMy computer is running very slow Since reading some of the other entries I have done some of the quick fixes that were listed such as getting rid of programs not used, disk clean-up and disk defrag but still my computer is lagging.
View 11 Replies View RelatedDefrag runs for 2-3 minutes maybe and the computer freezes or defrag stalls. I have checked for viruses. I have run defrag in safe mode.
View 42 Replies View RelatedI want to use a Defrag programe in order to clean up my computer (truse me, I really need to clean it up...). Now I have a programe called "UltimateDefrag", and I'm running a defrag using this programe as we speak. Also, since I'm not sure about this programe, I've taken a look in the programe manual, and I could bearly understand enough to run a defarg using this programe.
View 7 Replies View RelatedWin xp pro, pen 4, norton antivirus, Win firewall. After I downloaded and installed Windows Live Messenger the defrag process wouldn't defrag all the files. I reformatted my computer without WLM and defragging was not a problem, worked like a charm. So, I downloaded and installed WLM again, and lo and behold the same problem occurred, the defrag program would not defrag all the files. I uninstalled WLM and defrag process still wouldn't defrag all the files. How do I solve this problem of not being able to defrag all of my files without reformatting my computer.
View 9 Replies View RelatedI have a new computer that is 3 months old. Everything has been wonderful and tonight when I logged on I cannot get my Internet server to move. It is total slow motion. I did a spyware check, virus scan and nothing surfaced. At one time I could not even change my homepage from Yahoo to MSN. Now it takes forever to flip a page.
View 3 Replies View RelatedWhen I try to open System Information, I get the message; 'Can't Collect Information.' A network error occurred in connecting to Windows Management
Instrumentation. Can this be fixed or do I have to reinstall XP? Also Defrag will not work and the Icon for Windows Update doesn't work.
Defraging main HardDisk Drive in XP Home edition w/ diskeeper 8.x and everything went smoothly as always, but then I decided to uninstall some useless apps and then went back to re-defrag and the reserved system space disappeared. Diskeeper was moving my files into the area where the reserved system space used to be so I stopped it. I then ran system restore and brought my system back 2days and re-tried to defrag and the reserved system space is still missing. Is this even a big deal? The computer (Dell 4400 P3) seems to be working just fine. Thanks.
View 2 Replies View RelatedI have tried to disk defrag and I keep getting the error message "Disk Defragment could not start." I've tried to reinstall itAlso, System Restore is not working. I get to select the point which I want to restore to, however when I select the continue / next button, nothing happens. Anyone have an idea as to what could be wrong? I've run anti-virus, anti-malware, (AVG, Malwarebites, Hijackthis) and I've re-installed things just in case a program may have erased it, my comp was last defragged 2 days ago.
View 13 Replies View RelatedRecently I found System Restore not working. It would neither restore to an earlier time nor create a new restore point. I tried doing a virus scan using Avast, rebooting, checking that it is (supposed to be) running and safe mode.Disconnecting from the Internet and turning off antivirus and firewall also made no difference. I also turned it off and on again. I noticed that initially it said it was monitoring drives C, D & E but after turning on again it only showed drives C & D. These drives are all partitions on my HD.On checking E I found that it had no file system and was advised to format it. On attempting this I got Format did not complete successfully.I also attempted to Defrag and got Disk Defragmenter could not start.
View 1 Replies View Relatedi cannot use disk defragmenter, when i click analyze or defragment it says "Disk Defragmenter could not start."i try to check the disk and it says "Windows was unable to complete disk check."last, i hope windows system restore could solve my problems, but after i select the restore point, i cannot click 'next', i clicked it and nothing happened.
View 4 Replies View Related