Programs To "install" Copy Protection On DVD's
Jun 30, 2009I have found many programs that remove copy protection from DVD's, is there one I can "install" copy protection on DVD's I burn to prevent others from copying my DVD'S?
View 1 RepliesI have found many programs that remove copy protection from DVD's, is there one I can "install" copy protection on DVD's I burn to prevent others from copying my DVD'S?
View 1 RepliesWindows xp pro and discovered that it is a pirated copy. I want to get rid of it and install my valid copy of 98se. do i format my hard drive i do have files i want to keep.
View 8 Replies View RelatedFor some reason when i validate my XP it says its some kind of company copy or something and wont let me install SP2. Is there anyway of just downloading it and manually installing it
View 4 Replies View RelatedI hate all the unwanted software that comes with this computer, and I don't even use any of the media stuff. Tell me, is it possible to just use dban and then install XP Home from a boot disc that I have? Could anything go wrong?
I am trying to install xp onto my new hdd. it goes through the formality of formating then it starts to copy files from cd to my hdd then all of a sudden it cant copy files. it is random(not a particalar file) some times at 5% 20% 80% ect:..but i can install winme no problems..then i try to install xp over the top of winme and i get the same problem..I have even taken my copy(originall) of xp to my friends and it installs with no problems at all..then i have taken their disk drive back to my machine, connected it and xp boots up with my motherboard..all is ok...but, when i do a fresh install with xp on their hdd i get the same problem..no settings in bios have been altered in anyway..
View 14 Replies View RelatedIts time for me to rebuild the old machine and i started looking for a guide i once saw on here (TG) which showed you the best way to install a clean copy of XP on a new machine.
View 2 Replies View Relatedi am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
I've been troubled by viruses and trojans on an older computer (Pentium4) and decided to reinstall XP from the disc to see if I can "start over". I have another primary computer, so it doesn't hurt me to lose all the files etc. I'd rather start with a clean slate. Anyway, the XP install from the disc with SP1 went fine. Then I installed SP2 per the request of the windows update monitor. The install proceeded fine until a copy error occurred.Copy Erro Error occurred while copying file sprb0414.dll.Cannot copy file to directory.
View 3 Replies View RelatedSo I have a laptop without a CD drive and I've done this before so I know it came be done, just can't seem to find the googled page that i found last time with the how to. I want to take the laptop HD out and put it into a USB mobile disk enclosure, then from my desktop in my windows xp RUN command I wanna set the XP CD in the drive to copy all its install files to the blank HD and start the XP installation but NOT RESTART after its done. Then take the HD out of the enclosure, pop it back into the laptop, boot up and have the install do the rest from there.
View 4 Replies View RelatedI had to install new hard drive.The only way out now, is to install a brand new copy of XP Home or Professional.I do not need the box/manual etc so I thought I could buy a cheaper copy OEM. But when I went to Amazon it said the OEM was not for a consumer, only system builders.Can anyone explain what problems I might encounter if I installed a OEM version (as funds are very tight - OEM would help out a lot).Or does anyone know of a version of XP that you can buy without the box etc (just the CD), that is for a home user.One other question - will my motherboard except a new version of XP(does it know that I am changing the "Product Key" etc).
View 7 Replies View RelatedMy computer got a harsh virus on it that is giving me problems so i'm left with no choice but to reformat it.
but here is my problem..
when i get to the partition part of the installation, it shows that i have 2 drives.
C: my main drive that has 70GB
D: Recovery drive that has 10 GB...
so, how should i approach this.
I just want 1 copy of windows XP running on my computer.
I turned on my computer today and everything's messed up. I'm running windows XP on a Sony Vaio (about 6 yrs. old). I have 2 separate CD drives, and my computer won't recognize them. Sometimes when I restarted it'd recognize one of them. When I'm in the BIOS screen it only shows 1 CD drive. I can't copy or backup files; I wanted to backup so I could revert back to factory settings. I also can't install or uninstall anything. My anti-virus program (McAfee) says it has updated, but when I run a scan it says my definitions are 5 months out of date. It suddenly takes a really long time to boot up.
View 3 Replies View Relatedits a brand new computer and only a month old. Windows XP Professional keeps on restarting itself for no reason. I tried to get into safe mode but it also restarts the computer before the OS can be loaded. It's the main business computer that keeps all my employee numbers and payroll accounts. Is there a way to reformat the computer without losing my precious data?
View 6 Replies View RelatedHave a laptop that i got in 2003 and i bought microsoft office pro with it. well my laptop is having problems and i have an extended warranty on it, the company said that the harddrive might have to be formated and i should backup everything. since my laptop didn't come with office and the cd got lost with the move to college, is there a way to copy the office program files? what im talking about is how with a game you can copy the folder .programs files/ea games/need for speed. like that and if you copy that folder to another computer it will work without having to be installed. i know its not in the registry.
View 3 Replies View RelatedI get an copy error, when trying to install windows components from control panel add/remove windows components. I have the right win xp sp2 cd in running and it says it cant find a specific file its looking for, but then when i click browse i see that its there in the cd the exact file i double click it and it doesn't recognize it or something again what can i do about this?
View 6 Replies View RelatedIt boots to either Win 2000 or XP Pro. I run XP most of the time. Updates been coming in everyday. It won't install SP2 because the copy of Windows "may not be valid". Any way to get around this garbage?
View 3 Replies View RelatedI've had XP installed 9 months and working great. Yesterday while looking at EBAY, the screen went black, and the computer locked up.Thru trials, I ended up reformating the HD and starting from scratch. XP starts the installation and at 37 minutes left to install, everything freezes. I have to restart and XP installation begins again at about 47 minutes left to install, then at 37 minutes left to finish, the system locks again, and again, again, and again, at 37 minutes to finish.
View 2 Replies View RelatedI am trying to install Service PAck 3 and have run into the following error. Setup cannot copy the file hsfdppsp2.sys. Ensure that the location below is correct or change it and insert "Windoes XP System Files" in the drive you specify. Copy files from: c:windowssystem32drivers
View 3 Replies View RelatedHypothetically,if I have an'illegal'copy of XP Pro which fails Windows Genuine Advantage verification and then buy a legal copy,do I have to do a complete re-install or can I just type the 'kosher' number in somewhere?
View 10 Replies View RelatedHave attempted to install a brand new & legal copy of XP Pro as well as the pc's (Compaq Evo N620C) original restore disk (W2000) on a brand new Seagate 60GB ATA hard drive and I get one of two responses along with a failed installation.I do have an old copy of Windows 98se that appears to be recognized by the pc and probably could be installed, but I would rather not. I started it up just enough to determine whether or not the pc and hdd would recognize the program, and it did....can anyone suggest what I am dealing with here and what can be done to get one of thes programs up and running, preferably the XP?
View 11 Replies View RelatedMy computer didn't come with an XP CD, just the manufacturer's restore CD which will wipe out all I've done in the last four years. So, if I backup (copy) all the files on my C drive, except the Windows folder (assuming that's where all the OS files are), to an external drive, then run the restore CD which will revert the computer back to the way it was when I bought it. Then download and install SP2 and copy the original files back to C.
View 3 Replies View RelatedI had bought several hard drives as is, hoping one of them would work. thought I had one, but turned out I couldn't install XP onto the disk, wouldn't copy any files. so I pretty much cut my loss on the drives and removed it the bad one from pc. now I get 2 options when booting windows. my original xp install, and the 2nd install that still needs to complete, how can I stop it from wanting to install xp again from the boot file and keep the original settings as they were?
View 6 Replies View RelatedI have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
View 11 Replies View Relatedive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
View 14 Replies View Relatedcan I stop xp from trying to install an old programme? which doesn't work and I can't delete? I have a copy of roxio media creator which doesn't work since I reset windows to an earlier point, the prog can't find a certificate and questions the system date so won't install. it won't delete either for the same reasons and every time I try to copy files it tries to install the damn thing, unsuccessfully
View 1 Replies View RelatedI have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View RelatedMy hard drive recently crashed and I reinstalled windows xp, the copy i brought with the product key turns out to me fake or blacklisted by Microsoft, the problem is i scanned the disc used for installation and it contain more than a few adware programs and viruses. My PC is operating noticeably slower than before the crash, I scanned my RAM with MemTest. There is also a couple adware programs that comes up in processes, only bitdefender blocks it from popping up when using the internet. Also my Primary IDE channel is using PIO Mode instead of DMA, ive heard this can be because of viruses, should I reinstall windows?Could this mean the windows has been modified and what should i do?
View 10 Replies View RelatedWhat would be the procedure for me to change from Windows XP to Windows 2000? Does XP have to be uninstalled or can I install 2000 without that requirement? Someone told me that I could just install 2000 and, that, in effect, would override XP. But, I don't want to goof something up so I thought I had better check with the experts here first.
View 13 Replies View RelatedI am having trouble to install some programs, I get this message: "The systems administrator has prevent policies to prevent this installation." Thats the message I get when i tried to reinstall office xp pro, also, i get the same message when i tried to install Diskkeeper 7, 8 or 9.I have XP Pro SP2 with the latest updates I am the signing as the Administrator..in fact, there is only one user.Mcafee antivirus
I have try to disable firewall.
I have a new problem, or at least new to me. My computer was shutdown without my knowledge, and all the peripherals disconnected and the entire unit set in the floor. (My wife moved out, and took the desk as well as her USB hard drive.) Now, when I booted it up, it keeps trying to install programs that are already there. When I tell it to cancel the installation, it just does it again. It keeps repeating this process for 6 or 7 tries, then quits for a few minutes. After a few minutes pass, it does it again. I've done a virus scan with AVG, scanned it with Spybot S&D, and nothing shows up. I've tried a system restore, but it will not restore to any point before today.
View 9 Replies View RelatedI just upgraded from windows ME to Xp, Anyway I probably did somthing wrong in the settings because when I try to install a program, it by default chooses an install path in the program files directory in my D drive. I really want these to go to program files in the C drive like normal though. How can I change the default install path or drive for new programs?
View 6 Replies View Related