It all started with problems on my moms desktop. She couldnt get on so i took out her hardrive and put it on desktop and backed everthing up. Then everything worked fine but last night i went to go and plug in my hardrives on my comp and when i powered it on the monitor popped up saying no signal and nothing loaded, and while it was turning on it was beeping.
I shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
PC is left on pretty much all the time. Whenever I have to restart it for whatever reason it restarts normally, loading XP relatively quickly. However, if I have to shut it down for even a few minutes, Windows will typically fail to load most of the time. Usually it will hang on the black screen with the white progress bar, or sometimes on the loading xp screen. At this point it will sometimes start up when I reset it, or it will show the "Windows failed to load normally" screen. If I then start in safemode then restart it usually works, or even if I choose "start windows normally". I'm not sure if this is a driver or hardware/bios issue, I have reformatted once, and restored the OS using my XP disk a couple of times but the problem persists. I keep most of my drivers up to date. Tools like Sandra don't report any major errors (from what I understand anyway). I have just ordered new RAM, as I thought this would sort the issue, but it hasnt. I have to run my memory at 100hz so it will boot without any problems . If I run my processor at 200fsb then the computer doesn't boot and it doesn't start.
I have a pc that was running windows xp pro until a couple of days ago. Nothing was changed or installed. And I do not not have windows xp sp2 installed. When I started the pc it would try to start windows and go into the options screen of starting in safemode, safe mode w/command prompt and so forth. I would choose safe mode and the system files would start to load and stop and hang on "amdapg.sys" file. I have read that it could have something to do with my AMD chipset. Which I do have. I even tried to do a clean install and still nothing, the xp setup trys to start windows and nothing happens it just sits there
I am trying to become computer smart......still working on it. My problem....Blue screen will not load nt4 os......BS states memory dump. Tried to restart......not working. I can enter, and did, f2 startup. I read where I needed to delete an old partition, did, now nt4 startup disk with not load, as i am prompted that the drive is too big (3.99). I cant seem to partition the drive? I would like to just start from scratch, wipe drive, start over..I just want to get this going so I could update nt4 (currently has sp1). I think I have my work cutout for me.
I took a hard drive out of another computer and put it into my computer to fix it. (I have my reasons for doing that) i hooked up the hard drive and when i turned on my computer, it loads the screen(the screen where it shows the master, slave, etc.). Then it loads the screen about boot from CD, and then it stops It stays at that screen and doesnt load windows.
My brother has a windows xp pro and the pc's history is not good It has many problems such as virus's etc but my brother can never be bothered too fix it. It has had windows xp re-installed many times.!This new problem is just finshed the computer off.What it is, is when you turn the power on the pc it loads up to the screen which is black and says windows xp pro and has the small loading bar which is normal for all windows xp's, it keeps loading up and then all of a sudden it restarts the computer and it just keeps repeating this process and there is no stop too it
When i turn on my pc i get this message.Stop c0000269 {Illegal System DLL relocation}The system DLL Kernel32.dll was relocated in memory .application not run properly relocation occurred becuase DLL c:windowssystem32GDI32.dll ocuppied address range reserved for windows system DLL's. The vendor suppling the DLL
I'm trying to fix my friends Hp and I usually know what im doing. But here I have no idea what to do. I tried going into the bios to change the boot order to cd to format and I can't. Can anyone tell me what to do.I changed out his hard drive with mine and it does nothing. just posts and goes to a black screen instead of trying to boot and blue screening as it usually do when you change hardrives between two computers.Changed the Ide cables no luck.
First my computer was cutting off in the middle of any program. I decided to delete everything on the drive and reformat it and reload windows xp. While trying to load windows xp it would load the set up but when going to load files it locked up everytime. I tried also loading windows 98, 95 and they too locked up. At one point it said I had a virus in my boot sector and at another time it said I had a virus in my RAM. I got a program called PC Beginner to help partition my drive and redo the MBR. I can partition the drive and format it but windows still doesn't load. Now I wonder if there is a problem with the mother board and I have a dual bios board, I was wonder if there is a program loaded in the dual bios that may somehow causing my problem. If so what can be done to clear the problem? How can I get windows reloaded?
Some time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
The situation: A reasonably new PC, clean and working properly. Several new programs are installed, including Firefox, Winamp, desktop publishing, photo manager, and security software (not the antivirus, standalone scanners.) Everything appears to be fine.I log on to Windows Live OneCare to use their "Safety Scanner" to, as they say, check for PC health issues and optimize performance. Mind you, the site recommends users log on once a month for the full service scan. As you know, the scan includes the removal of what it refers to as invalid registry entries. "Oh boy," right? The registry. Except you'd like to believe the official Microsoft site won't screw up your programs.
I tried to do a System Recovery today on my Sony laptop. Got 41% completed and had a fatal error. Options given were Ignore, Retry or Abort. Attempted a Retry. Got a fatal error message and everything locked up. I ended up shutting down and when I turned the computer on again it said no operating system found. Where did I screw up?
This is a six year old Sony, XP, AMD 1.0Ghz. Everything was working at the time I tried the System Recovery EXCEPT I was constantly getting low space messages for drive C. I have no files on this drive and very little software. It is a 20G hard drive partioned into two 10G partitions.
Should I ever use one of the utility programs to wipe my hard drive completely, how do I reinstall Windows XP since the CD driver has been erased? How can you reinstall an operating system that is on CD when you have no driver for the CD player? The reason I am asking these questions is that I might want to give my computer to friend and I want my stuff off of the hard drive and my friend to be able to use the computer.
my computer attack viruses last weeks.so i got system alert message. since i deleted that viruses.But system alert message didn't go.Please tell any for how delete or cancel that system alert message.
I just corrected my problem by reinstalling the operating system from a CD for windows XP... The problem now is there is NO audio device, I cannot download some of programs from the CD's--it can't find the installation program.I have no sound and cannot donwload some of the programs that came with this computer.
I have 2 windows on my pc. Now i want to install some programs without restarting to the other win sys. how can i trick current win to think that i'm now actually at my c:windows & not e:windows (something to do worth system variables?).
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
I decided to complete a system restore of my computer. I restarted the computer with the reload/backup cd I got with my manufacturer when I bought the computer 7 years ago. I followed the instructions to restore my computer to its factory settings and after it had completed, I took the cd out and restarted the computer, however I am prompted with the message.verifying DMI pool data Boot from ATAPI cd-rom failure then nothing happens. I have done this procedure 4-5 times before and xp has always restarted after restore. Surely windows xp hasnt been deleted completely? I did another restore afterwards and the same thing happens.
I read somewhere?{and forgot to note where} that system restore "does not restore everything"! Correct?What doesn't it restore? Isn't it primarily personal stuff that you should backup anyway? Can anyone provide a list of what it doesn't restore or provide a link to? that gives this info?Is it in the help/tutorial/tour of xp and other OSs that have it?Remember! =There's no such thing as a stupid question but they're the easiest to answer!" TSG says so! So there!
i just reformatted my hdd with my system restore dvd (symantic ghost)i have used this disk multipule times (major hardware problems) this time after ghost repartitions and reformats the Hdd it installs windoze xp home OEM (eww..machine) windows installs fine and then it asks me to remove my disk and press any key to reboot After it reboots windows goes through its setup (not install) it is the pretty blue screens first it asks for language then time zone then the EULA the it asks for me to name the computer
I have read through the forums and didnt find anything related to my problem, i have bought a new PC and used my old harddisk with the same operating system, luckly i was able to access the harddisk and everything was working fine, i prefered to format and install a fresh XP, after installing all the drivers, everything was working fine, however sometimes the PC hangs and you can not click or move the nouse or do anything, no error message is poping and i have to restart the PC manually.
I desperately need my laptop to work and I've run into this grave problem. When I came home today, my laptop wouldn't start properly and it would say "No Operating System Found" on a black screen after seemingly trying to load for a while. The laptop had a weird whirring sound that wasn't present before. I have a Sony VAIO PCG-K23.
My home PC uses Windows 2000 as it's OS. At work I'm on XP, which I really like. I'm wondering if I should change my home PC to Vista. Does that make any sense? If I do, how much trouble will it be to make the change?
How difficult is the process of uninstalling XP on my old PC and reinstalling that same copy on my new one? I want to wait until the first service pack of Vista is out before upgrading. I've heard reinstalling XP on a new PC can cause problems but I don't see how it would if it's no longer on my old PC.
I Have a dell inspiron 8200 and i reinstalled windows from another dell computers windows disk. When its starts up its goes to the windows start when it starts to go to the log in part. The video goes all crazy and i can't see anything when i start it in safe mode its fine.
Recently, my computer had been running rather different than normal, and I felt that something disastrous was going to happen soon, but I took the stupid route of simply doing nothing and excusing my hunch as nothing more than the computer being old. Pompeii 2 decided to take place on my computer. My "hunch" was very correct, as yesterday, multiple trojan downloaders showed their ugly faces, and placed nearly every virus known to man on my desktop. I then proceeded to but windows in safe mode, unplug the ethernet cable, and run Trojan Remover with the latest updates. Well Trojan Remover did quite a little number on my comp, disabled svchost's from running, and made it impossible for me to connect to the internet. After rebooting again, Windows was unable to boot and a box popped up stating that lsass.exe could not be found. I then booted into Compaq System Recovery and performed a "Safe" recovery that doesn't delete data but restores everything else.
It's running like molasses in January. I've run Spybot, Advanced Care, AVG and defragged. It was better for about 10 minutes and that was it. Slow to load any program, internet is slow, a girl could get old here trying to get work done.
All of a sudden my laptop computer has gone absolutly barmey! In normal mode it won't load up Windows at all the screen just goes blank. I can manage to get Windows XP booted up using Safe Mode but the screen goes absolutly mad like a sort of snow storm: Screenshot. At first I thought that this was a faulty monitor but it can't be because the poor picture quality shows up in the screenshot. The picture is also blocky when the computer is loading up on the boot screens. I've got avast! Pro and Zone Alarm Pro running, both of which are up to date.
when I try to start up windows I get the screen with the windows xp logo and the bar thingy that runs through the box. It looks something like this picture I made in MS Paint. Yeah, well you get the idea. I'm thinking it could have damaged one of the system files, something similar happened to my uncle. He was shutting down his computer and he all of a sudden pulled the power and his computer went dead because it was the exact wrong time to pull the power.