Using:Win XP MCE SP2. I just set up an sftp server on one of my computers for remote backup purposes. I'm using openssh and cygwin to run the server so it can be secure and all that but I'm still a little paranoid about getting hacked etc. Since ssh uses windows users for login usernames and passwords I created a new user in the user group so it wouldn't have any administrative privileges. The way I understand is that if that user has some sort of ntfs file access restrictions then openssh will respect that and won't allow anyone logged on to the server with that user name to access any restricted files and folders. I want to restrict this user to have access to just ONE folder on the entire system. I don't want the user to be able to read or write or execute anything outside of its home folder. Since ssh respects ntfs restrictions i assumed that that would be the best way to do it. So if it is, what would be the easiest way to restrict access to everything but that one folder, and if that is not the best way then what is.
I was reallocating them earlier... and something went terribly terribly wrong. (gremlins I say) I try to log into my user account, but it says it does not have access to any of the files (like the desktop, c:/docs and settings/username/desktop)So is there a way to fix this, preferrably an app that will be able to rewrite the file permissions tables on a large scale?
I Recently had a norton antivirus trial period expire. I ran an uninstall and downloaded and ran the removal tool on the norton website. there was sometime I went with no protection and picked up some viruses. At sometime these removed my administrator rights.there is only one user account on this XP computer I lost my control panel, no access to security center, My active desktop went white and I get "access denied Please contact your administrator" messages when I right click properties on the desktop. So I ran several free antivirus programs and spyware programs and i believe i have removed any and all viruses and spyware. I Have regained control of the active desktop and can now use control,alt,delete! but I still have no access to control panel, security center, or desktop properties. I recieve a message saying "access denied due to restrictions on this computer contact your administrator"
my computer at the start up screen runs the check disk tool from windows.It should only try to run the tool once but when it starts up it says connot open or access the ntfs file.Also I tried to start my computer in safe mode today and it pulled upall the way to the black page where it displays the file names but it froze and never went any farther.
Im doing a clean, brand spanking new install on a machine that has no floppy drive. I have switched around the boot sequence in the BIOS to boot the CD ROM first, and that recognizes the disc ok. Windows formats the unpartitioned hard drive to NTFS. At first I got an error saying the NTFS.SYS file was corrupt, so I wiped everything out, and began again. This time I partitioned the hard drive first, and it seems to want to go futher, and I no longer get the NTFS.SYS error, but when it begins copying files, it hangs at about 18 percent when it starts copying 'driver.cab' and I get a Blue Screen saying PFN_LIST_CORRUPT.
Who provides an excellent service for recovering 100K+ of files - NTFS; I clobbered a perfectly healthy drive by putting it in an enclosure that turned out to be a Maxstor Onetouch. 512GB partition is now 128GB. A local recovery service salvaged directories and 100K+ files, but most files contain binary 0's.
Any strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
It's a shame that me did a grave error. I am in terrible shock for that I did the following:
a) Installed Sun Solaris Express x86 Developer Edition with a 7.5 GB partition. b) There is Windows XP SP2 on the first 20 GB partition.
I wanted to toggle boot flag by using DOS based fdisk after the Solaris installation. That's where me screwed up I ran a bootable Russian language DOS tools. Instead of toggling the boot flag (option 2 in the fdisk), me accidentally (while taking an overseas call) selected (option 1) the FAT formatting the existing NTFS partition (fdisk ran for 1%, then me immediately stopped and rebooted. But, already damage done My NTFS got screwed up by me.....
I don't know how this happened. But when I went to my D drive which is My Documents, the drive was empty. Though when I check the drive properties it shows that 18G is being used, plus it's showing that the file system is RAW. Not sure how it got that way because it should be NTFS. I am able to view My Pictures and My Music by viewing from the start menu and going to My Pictures or My Music, but when I go to My Documents it's empty.
Now my question is how do I recover those missing files? I'm assuming that they are around because My Pictures and My Music are two of the files that are in my documents folder. This just leaves 25% of the drive I can't view. I can't do system restore because I don't have the D drive being monitored, so I can't do that. I did a virus scan and a spyware scan and the system is clean. Another thing I noticed is if I try to save something to the D drive it will appear to be the only item on the drive, but when I click refresh it will vanish.
I have a GM SATA 160GB External Hard Drive that is USB compatible.During a recent file transfer, a suspected Virus infection caused all folders to executable files which even could not be viewed. Failing in several attempts to recover any of the affected files, I resorted to various formatting procedures including Low-level formatting. RAW file format resulted and now I need an NTFS file format to be able to use the drive!
Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
Hope I'm in the right category. I'm using an Acer Intel Celeron D, Win XP (Home Edition) and my file system is FAT 32. I've heard that NTFS is superior and I am thinking of converting it. I understand that once converted, it is irrevisible. Should I convert it to NTFS and in what way is it better than FAT 32.
I am using windows XP with SP2 presently running on the FAT32 file system. Can I now convert to NTFS? What will the effects be or will I lose all my data..Is there any advantage to use NTFS?
I have a subdirectory which shows as "Read Only". As administrator I access file properties window and change read only attribute. However, when I look at file properties again the "Read Only" attribute is still set
To convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
Just bought a maxter 300 gb usb high speed 16mb cache.It would work when i pluged it in..So i formated it. and it works fine now.But i noticed it says it is on 279.47 gb in free space after formating.Is this normal? over 20 gb lost seems high to meMy 160 gb USB 2.0 xternial is 152.66 gb.I formated like my other USB hD and my 2 internial ones both 120 GB, they have 111.78 in them.Layout Partition Type Basic File system NTFS
A few days ago I noticed that when I tried to play a video file that I downloaded with VLC, it actually opened another video file on that hard drive (500GB Seagate, partition G: used for video files) instead of the one I selected. It had played fine earlier, so something must have happened to cause the file system to point to the wrong file.
I didn't pay too much attention to it at first, but then this morning I noticed that this wasn't the only occurrence of this weird error. When I tried to play a podcast episode with iTunes which is located on another partition and another hard drive (320GB Seagate, partition H: used for music files) it *also* was pointing to another music file on that same hard drive. Because this struck me as very odd I tried opening other files on these partitions. Some opened the right file, some opened wrong ones. I've done a chkdsk on both partitions. On the H: partition it did fix some errors, but G: seemed to be fine. Nevertheless, the problem remained. I've tried to google for this problem, but I'm having trouble finding a good search term. I've never had a problem like this before, so I'm unfamiliar with the terminology that might be used to document this problem.
I have done analysis of my PC with Microsoft Baseline Security Analyzer (see image) and it tells me I should convert my D drive into NTFS. Is it safe ? Can I do it without loosing any data ? How can I do it?
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
Last access time stampsXP automatically updates the date and time stamp with information about the last time you accessed a file. Not only does it mark the file, but it also updates the directory the file is located in as well as any directories above it. If you have a large hard drive with many subdirectories on it, this updating can slow down your system.To disable the updating, start the Registry Editor by selecting Run from the Start menu, typing regedit in the Open text box, and clicking OK.
When the Registry Editor window opens, navigate through the left pane until you get to HKEY_LOCAL_MACHINESYSTEMCurrentControl SetControlFilesystemIn the right pane, look for the value named NtfsDisableLastAccessUpdate. If the value exists, it's probably set to 0. To change the value, double-click it. You'll then see the Edit DWORD Value screen. Enter 1 in the Value Data field and click OK.If the value doesn't exist, you'll need to add it. Select New | DWORD Value from the Edit menu.
This is what it shows me when I turn on the computer and windows tried to load: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you�ve seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0X00000024 and a bunch of other numbers and letters..............
My old m/b got fried, so i changed to another m/b and used the same hd for it, and i reinstalled windows XP after deleting the previous, but now when i'm trying to access a folder or file, i get this error "Document may be write protected or encrypted", i really need to open this file, how can i overcome this error?
A week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
I got a computer from my boss that had a bad motherboard and processor, i put a new in it and now im trying to format the hd but it has xp on it and has a password, my boss forgot what it was so im trying to format it from dos i wrote "format c:" and it says
"The type of the file system is NTFS. Enter current volume lable for drive C:
I work at a Job Corps Center where we have three clerical trade shops loaded with Windows XP computers. We need to install a retriction that will create an Administrator Password that can not be deleted by simply logging into safe mode. Also, we need to make it impossible for the students to create their own accounts with their own passwords. Right now the teachers are having a hard time, because several knuckleheads keep making a mess by changing the instructor's passwords and creating their own unique ones. How can we create those restrictions?
Is there documentation somewhere that will tell you what you cannot do on a WinXP Pro PC if you don't have Administrative access / logon (a member of the local dministrators group)?
I know there are numerous things you cannot do, but I would really like to see a list of the restrictions.
