my computer's desktop shows shortcut as the type of file and when i click on icon to open program, it opens in notepad and the page or program is in symbols. It says this program can not open in DOS mode. How do i get it back to its original state. I have no CD or back up files to access.
View 1 RepliesHaving a problem with booting into safe mode on my SONY WinXP Pro computer, I searched on the internet for a solution....This opens the boot.ini file in Notepad.
- One line should end with "/fastdetect" (NOT "/fastdetect /sos"). Copy that line.
- Paste the line you just copied below the original line. Change "WINDOWS=Microsoft XP Professional" to "WINDOWS="Safe Mode" and add the following text to the end of the line: /safeboot:minimal /sos /bootlog
- Save the file and click OK to exit the dialog boxes. Note: If you named the Windows XP installation folder something other than WINDOWS when you installed XP, that name will appear instead of WINDOWS in step 6.
Before following the instructions, I created a backup copy of my boot.ini file. I then proceeded to do as instructed. Unfortunately, I needed access to the internet which this didn't allow for. I then copied the origional boot.ini information back to my boot.ini file in Notepad and saved it. However, when I boot, it still goes into the basic Safe Mode.
I'm having the same issue at my work place that ScubaGirl had posted,so far four of our users have put in calls for it.ScubaGirl's post read: Clicking mapped /network drives opens minesweeper For some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 1 Replies View RelatedI have to run a virus removal tool from Trend -Micro, I extracted it and tried to use it, but I can't open it. Any idea what opens a .236 file?
View 13 Replies View RelatedI have an issue with my new clean install on XP. Every time I boot, C:Program Files keps opening. Here is the stuff I have tried so far. I looked in msconfig, the startup folder and in Startup on my programs list and it doesn't show up in any of these places. It isn't a new program, so it's not because I installed it recently. Here is HiJack This log for reference. I dont have clue what's to look in this. But may be it will help you. Similarly I have copy-pasted contents from autoexec.bat,win.ini and sys.ini for debugging. You may notice that there is TaskMgr link in startup. But its just one of my app I need on startup in my taskbar. It startup as minimized and it has setting "Hide on Minimized" checked in TaskManager. So It remains in taskbar always.
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:44:33 PM, on 10/14/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)
Boot mode: Normal
Running processes:
D:WINDOWSSystem32smss.exe
D:WINDOWSsystem32winlogon.exe
D:WINDOWSsystem32services.exe...............
Every time I right click on a file and chose open with then choose program it always, with out fail, no matter what the extension,assumes I mean notepad.exe. AVIs to Zip files get Notepad. I suspect a registry entry but I don't know where to look and Google failed to find anything close to what i was looking for. The problem first occurred with my HOSTS file. I typed the c:windowssystem32driversetchosts into my run and instead of the Choose program it immediately opened in notepad, convenient in that instances but not the majority of the time...
I have checked for Spyware (clean), run AVG (clean), and I am very reluctant to reinstall windows, again. Last time they tried to force me to purchase a new copy of windows pro after installing it and activating it on the SAME system (not this computer) for the third time. They wanted to know when/where/ and what model I purchased.
I'm running WinXP/SP2. All of a sudden, every time I try to open a JPG file all I get is a notepad with gobbledegook. What has happened, and how do I fix it?
I can open any other type of photo or video with no problems.
When I attempt to Defragment my computer (Start, Run, type dfrg.msc), my computer starts Adobe Photoshop instead of the Defragment, anyone know how to repair this? Thanks.
View 1 Replies View Relatedi have a problem when i click on an item (this only happens sumtimes like 50% of the time) it takes forEVER! ! i mean forever seriously and then it opens in like 20 or 30 mins
View 13 Replies View Relatedif you follow the link below you will see my problem , its still happning .. any ideas ? i have tryied all the tips and some of that i now of http://forums. techguy.org/showthread...5&goto=newpost
View 1 Replies View RelatedEvery time I start Windows the C:Program filesCommon folder opens up. I have a hunch that it's to do with Install Shield. But I have no idea how to fix it. I have looked at my startup folder and there are no shortcuts to open this window.
View 1 Replies View RelatedEvery once in a while my pc acts really nutty. What happens is that I'll go to open a program (lets say Nero Burning Rom) and on a single double click Nero will open up 70+ times. Furthermore, it makes mostly all of my programs act up when this starts happening. For example, when I click the arrow in the system tray it expands and collapses tons of times before it stops. If I open Firefox my homepage sort of half loads over and over and won't stop. MSN Messenger opens up then freaks out when I put the pointer in its window (this happens in the above Firefox example too). All of this activity makes the pc unusable until it all stops. Speaking of when it stops, it does't stop with a restart, it just stops mid session. I thought it could be a mouse problem because the trackball I use is pretty ancient and I figured it just might have just petered out finally, but then I tried another mouse that I found laying around and it did the same things. One other thing I've noticed it (the trackball) doing is when it's not being used the pointer slowly crawls towards the top of the screen. I've run my anti-virus and all three of my spyware programs and none of them find anything out of the ordinary. So what could be causing this? I'm starting to think it might be my mouse port, but how would I find this out?
View 1 Replies View RelatedWhenever I startup my laptop, the "C:Program FilesDell" folder opens automatically. I've had this pc for years but this started happening only recently. I don't know what could've changed, but it is very annoying and I need to find a way to make it stop. I've been searching various sites all over the net, and so far I have tried messing with "msconfig" and "Regedit.exe," among other things, and the problem still exists. Please contact me if anyone knows how to resolve this issue.
View 2 Replies View RelatedI have accidentally changed the program a file opens with. It was a macro program and I went to delete it and it changed all of my files related to it, and now i can't open them. I downloaded it again but it still opened with the same program. How can i get it to open again?
View 6 Replies View RelatedI am new to this website. I am intersted to see what kind of valuable feedback I can get for my current computer issue. I have 2 users set up on my Laptop PC. On my desktop, all programs function fine. On the other desktop for the other user, when a program is launched, it opens up as a blank program window. IE opens fine, but other programs such as McAfee and other certain Microsoft Office programs will open but not fully execute.
View 1 Replies View Relatedhow do i pick which web browser opens web links because when i installed sbc yahoo web browser it took over links and now when i click a link it opens up
that browser i want it tom open up in internet explorer
Every time an explorer window opens, be it internet or windows, the install program for Money starts up. Any ideas how to stop this?
View 4 Replies View RelatedC:Program FilesCommonWhich contains the Microsoft Shared folder opens on start up everytime. Any idea how to stop it?
View 1 Replies View RelatedEver since I installed version 1.0 of MS SyncToy everytime I start XP the folder C:Program FilesMicrosoft is displayed on the screen. I have checked the RUN areas in the registry, ran HiJack this and still can not find why this folder is being opened.
View 5 Replies View RelatedI have recently loaded my copy of AutocadLt 2002. For about a week it worked fine, but how I have a problem opening Autocad. If I click on the short cut it opens, flashed up the screens, then closed. If I restart the machine 80% of the time I can open Autocad, but when using it, it will suddenly close. I have reinstalled, and repaired the program. No change. I have booted the system and repaired the autocad from the disk today, it has progressed to 99% but hung up.
View 4 Replies View RelatedWhen an attempt is made to access the Internet or open a program, the computer rapidly opens lots of episodes of the same program on its own.Norton Antivirus has been run several times with no virus detected, and Spybot has also been run with no spyware detected. Spyware Blaster also guarding the computer.
View 3 Replies View RelatedI am running Win XP Pro SP2. Every 15 minutes or so an unknown program opens itself and then closes. The only thing displayed on the screen is on the start bar. Right next to my currently open programs (or at the beginning if nothing is open) there appears what looks like an open program except with just the white box that is standard for windows when the program (or .exe file) doesn't have an icon. I have searched my PC with AVG antivirus and with both Windows Antispyware and Adaware SE. Nothing was found. I don't notice any other problems with the pc. It's just a very annoying thing that I would like to resolve.
View 9 Replies View RelatedI am running XP Pro on a laptop loaded with programs and files.When I recently started it up, instead of loading with the familiar Compaq logo, it started in a DOS program (Phoenix BIOS) with a warning
that "it had not been shut down correctly last time." I think I did shut it down correctly last time. The BIOS offered me two options. 1) Hit F1 to Boot or 2) Hit F10 to continue. I hit F10. That took me to a screen where I had to guess what to choose. Did I want to Save and Exit? Did I want to Escape and abandon changes? etc. I didn't know what to do but it seems I had not made any changes so I said "abandon changes and boot
Everytime I start my computer the C:Program FilesCommon folder opens! It's so annoying. I have looked at other posts and have tried the Start-Run-misconfig-Check startup tab but this folder is not listed. There
are some programs within the common files folder that are listed, but not the simple file path I wrote above.
One of my co-workers has been having this odd problem and I'm not sure what to make of it. On occasion, she goes to open an INDD (Adobe InDesign) file which is stored on our Windows 2003 server, and it opens as "read-only." She opens the file to make changes and can't because InDesign won't let her save any changes to the file.There's no apparent reason for this - she has full access to the file, the file's read-only bit has not been set, and there's plenty of space on the server.What she usually does to get around it is to "Save As." over the file she's just opened. That normally works. On occasion this doesn't work and she has to "Save As." to her desktop, then "Save As." back over the original. It's a pain for her at the very least.
What's odd is that I've checked the "open files" list on that Windows 2003 server when she gets the error. Her workstation suddenly opens a whole handful of zip files located on the same Windows 2003 server (some of our digital artwork comes in zip packages). They are opened in read mode only (READ, not READ-WRITE).When she does her "save as." and gets past the error, the read locks/handles on the zip files are closed also. The ZIP thing sounded suspicious to me and I scanned her computer (as well as the ZIPs) for viruses. Nothing came up. I have since even re-installed the entire operating system (Windows XP Professional, SP2) and still the same behavior.Now what's funny is it's only InDesign (CS). All of her other apps (even other Adobe apps) seem to behave correctly.
I've even inspected her network wiring and replaced her aged CAT5 with brand-new CAT5e, which needed to be done anyway. (we run gigabit). Net connections are solid (she's only 20-30 feet away from my office where all the office switches are located, which makes things easier). No one else in the office has the problem, and her computer (and software installed) is comparable to everyone else's, at least in her department.
Our software is too old to get support from Adobe (upgrading to CS3 isn't financially feasible at the moment but not sure an upgrade would help if I don't know what the problem is), and I've tried the official Adobe forums with no luck. I didn't get very far - most of the people on that forum aren't PC/NET tech experts, just Adobe users (for the most part). It seems that way, anyway.I guess I'm running out of ideas. What should I do to figure out what's going on here?
I recently had to do a system restore and now my .jpg and jpeg files have a bad file icon. They still do open with the windows pic program as I want them to - but only on the admin accout, I usually surf and play and do everything else with a user account, and even if I reset everything under folder options for the file associacions it somehow doesn't apply to the other account.
windows tells me in the file association menu that I changed the file association's properties and can set them back to standart "photo suite 6" - a program that I uninstalled ages ago
It is frustrating having every program automatically install to program files, including minor things like audio attachment. I know I'll end up with tons and tons of folders in program files. Beyond that, I can't access program files from the other computers on the network. Is there a good way to reorganize/move files to my C drive in a way that would be efficient and wouldn't require reinstalling every single program in a different place?
View 7 Replies View RelatedUm.. I think this could go here. Well i just partitioned my hard drive and i seperated it by music, programs, etc. What im trying to do is get all my programs to use the seperate partition (E) instead of C:. I just wanted to know how to do this.
View 1 Replies View RelatedI'm using Win XP and, using the built in Zip feature,have zipped up 14 files that include one .exe file and one .bas file.When I try to Extract All files it extracts all except these two files.It says that the files have been blocked to protect the computer, then I can click on a link to find out how to unblock the files but the instructions to do so don't make sense.The instructions tell you to save the file, then right click/properties/unblock, but I can't see how you can save a file if it hasn't been unzipped.How can I stop the .exe and .bas files from being blocked
View 6 Replies View RelatedI recently started using DVD Decrypter to rip some of my DVD's and then convert them to play on my Sony Playstation Portable (using PSP video 9) And it's working great.Now that I know how to do this, (rip tracks off of DVD'S) I was just wondering if anyone can tell me what the BEST program is, or what people use, to use those .vob files and turn them into .AVI files or .MPEG files, so that I can carry them with me on my laptop.
View 1 Replies View RelatedNotepad has gone missing, the computer is running sluggishly (I have checked for viruses, Spyware ect and run defrag) and desite loads of earlier dates System Restore goes through the motions and then tells me that it is not possible to restore to any of them. I am guessing that my windows Xp is corrupted. Because i dont want the hassle of re-loading all my other programs and files, is there a safe way to repair windows Xp rather than completely reinstalling it?
View 4 Replies View Related