Off and on over the last couple of months, while typing anything with my keyboard, I'll be right in the middle of a sentence when, suddenly my keyboard starts spitting out pure gibberish. The characters are totally alien and strange looking. I restart my computer and it straightens out.Does anyone have any clues as to what might cause this bizzar behavior?
View 11 RepliesBoth usb and ps2 keyboards work when going into bios or using a OS on a disk, yet will not work after windows boots. Every other thing works great usb mouse, joystick, etc. I have uninstalled keyboard in safe mode, then rebooted. I tried a repair with OS disk. No software problems. Running lots of mal-ware protection. Using on screen keyboard is getting old fast. Has been this way for awhile as I keep expecting other problems and then I'll have to do a OS reinstall last resort.But no other problem have surfaced, so I keep putting it off.
View 8 Replies View RelatedThe machine: Compaq Pressario SR1103 Window XP Home, 256 MB PC2700, ASUS CDRW, NAV.I ran Microsoft Antispyware Beta 1. Found and removed eZula.WebOffer, eZula.TodText, Target Saver Trojan Downloader, SearchForIt.Adshooter, and Hotbar Shopping Reports. After rebooting, all the text in Windows is gibberish, (Symbols). Will a system recovery, using the recovery disk fix the problem, Are there other possible fixes?
The system has a D: partition, which apparently contains the Recovery Console. It's an option at the boot screen. Is it possible to repair this particular problem from the Recovery Console, or is the Repair install my only option
I was playing "The Elder Scrolls III: Morrowind" on my PC, when suddenly, the computer freezes and the textures in-game became pixelated like rainbows. After hitting Ctrl+Alt+Delete several times, the computer hung at a black screen for a moment, before displaying "No Signal" on my monitor.I rebooted to see the BIOS screen, with the white "HP" logo ridden with black vertical lines. When the computer starts the next phase, my screen is immediately covered with complete gibberish, Qmeas!Semecu!Vie!, letters, numbers, characters, of a language I've never even seen. "Windows" is spelled like "Winewues" or someting, and it's almost impossible to decipher what you're choosing. There appears to be another layer of gibberish beneath the initial gibberish. Next, it goes to a blank screen with the blinking
View 6 Replies View RelatedI have a friends PC, a gateway P4 2.6, winxp home. The mouse and keyboard up and died. He had a kvm switch, the electronic kind when it stopped functioning. I have tried usb, ps2 everything. The keyboard works on bootup, so I can get into bios etc... but when it gets to the windows screen, nothing. No mouse or keyboard. Safe mode is the same thing. Dont want to format and reinstall windows. On that note, I did try a repair, when it asks for admin password it wont accept it. Says invalid admin password.. The password IS windows admin password though. With no mouse even in safemode, and windows not accepting my admin password during repair,
View 1 Replies View RelatedI just finished assembling my new build. It boots and I can get to the BIOS. I even have it booting from the DVD drive so I can load Win XP.However, when I get to the Windows Setup and it asks me if I want to setup windows(press enter), Repair(some other key), quit(F3) my keyboard won't work. I hit "Enter" because I want to install XP and nothing happens. It is not responding to my keyboard strokes.
This is strange because the keyboard works in the BIOS.
My friends keyboard is not working. When she turns the computer on no lights come up on the keyboard. Have tried another keyboard and still the same. Unable to get into the computer to check bios etc as there is a password on the account.
View 6 Replies View Relatedmy system has been acting up today. I got home from class and tried to install my Microsoft Visual Studio, it asked me to restart after the installation. When I did, right when it got to the desktop it said something about a registry problem has been restored and the system has been recovered. Something along those lines. Getting back on the subject, 5 seconds after it reaches the desktop it crashes. Not a hard crash, just a restart, but it crashes none-the-less. Is there a way to get around this without reformatting?(I even tried running in Safe Mode, same problem.) I can't seem to find a way to fix it if I can't even get to my desktop.
View 11 Replies View RelatedA couple of weeks ago I downloaded latest windows update and rebooted as instructed. Only the PC kept rebooting itself continuously. When I stopped it with F8 and set it not to restart on errors I got a critical windows error message. I reformatted drive and reinstalled windows, all was fine for a couple of days, then here is the really wierd thing. I heard the fan spinning but neither I nor Lady Walsh had turned the PC on. I once again found it rebooting itself in a continuous loop. Seems it turned itself on from standby and corrupted windows again. I totally wiped the disc, reformatted both partitions and reinstalled windows. Did a full Norton antivirus scan which came up clean. But the same happened again yesterday. Anyone heard of a virus that can start your PC up from standby and reinstall itself ? And that can survive a disc fomat and windows re-installation? I'm running XP Sp2 on an AMD64 with 1 Gb RAM 120 Gb disc.
View 10 Replies View Relatedever since I installed xp I've been having this problem .When I'm done useing my computer I shut it down and walk away.I saw it shut down I heard it shut down it is shut down.When I return into the room the computer is up and running and I've seen it turn on by it self.Is there something somewhere that i need to set?
View 4 Replies View Relatedwhen my windows xp boots up...everything starts up except that the yahoo and msn messengers as well as the broadband connection dialin link doesnt works till like a minute or so after windows has got booted...it seems like the windows waits for something to load for about a minute and then after a minute the hard drive shows some activity and yahoo,msn and the broadband link comes up and i can only dial the link then...this 1 minute wait for the connection to be connected is really annoying me...from the task manager i c that 2 services imapi.exe,alg.exe and wmiserve.exe starts up after the freezing time of the windows and then net connection gets connected...if u want any more details i will let you know.
View 8 Replies View RelatedI have a Computer problem i couldnt solve.When i push the power button on my case, the fans and the Bios beep are noticed. After that it just stops, it wont go past that point.
View 6 Replies View RelatedMy PC automatically starts up at exactly 12:00 every night. It starts up and shows the login window. Really annoying. Does anyone have an idea on how to turn this off?
View 6 Replies View Relatedwell it does not hesitate when i first start the pc but after about a half hour everything starts hesitating. programs wont respond as quickly as they should. not just one program but everything i try to do is just overall slower than normalive run virus scans and no viruses. any ideas? its a windows xp pc with amd 3400+ prossesor and 512 mb ram.
View 14 Replies View RelatedI have a Gateway laptop that will not start up. All it says is Gateway and gives the F2 and F10 option that don't work.
View 9 Replies View RelatedWhen I switch on the main power, the computers starts automatically ie. without switching the CPU. The following message is displayed on the screen 'CMOS settings wrong.Press F1 to restore defaults and continue' Upon pressing F1 the machine starts. I do'nt know how to set CMOS settings right Time/Date settings change automatically.
I cannot install any software.Messages like file missing.Cannot open installer pkg.Contact your vendor etc. I do'nt have the installation cs availablewith me.However when I try to repair/reinstall with the help of my other win xp cd, i get the message 'key no. is wrong.I cannot format the c: drive from within.
I turned my pc on today which runs on Windows XP Pro. Every time the computer starts I get four or five options Safe Mode, Safe mode with Prompt, Last well know configuration, etc (most ppl know what I mean here.)
Every time I click on any of the modes my computer restarts. Just before the pc restarts I see a blue screen quickly flash (i know this is know as the 'blue screen of death'.)
I have put in my XP cd but i cant get it to run so i use recovery not even when I run it from my BIOS Screen
Everytime I launch an IE window (v6.0.2900) a SVCHOST.EXE process starts and uses 100% of the CPU. If I kill the process all is fine until I start another IE instance or window.I have tried replacing SVCHOST.EXE in c:windowssystem32 with no luck and I have also run the MD DIAGS to see if they had any suggestion
I have an eMachines Mod. T2642. OS WindowsXP Home sp2. When I plug in the power cord, the fans start up and the HD LED starts to flash and there is a clicking sound coming from the cpu. This is as for as it goes...no p.o.s.t. no nothing. The power switch will not turn the system off.
View 7 Replies View RelatedI have a Windows XP Pro SP3 totally updated.I switch on the computer and runs well. No problems are shown. At login screen I put my credentials, it starts to load my desktop and then, before anything can load appears a message saying this (or something like this):Explorer.exe must restart because it can load an application.I click on Ok and then nothing happens. I only see my desktop background.Well, I reset the computer pushing the button on the PC. I load Windows XP on fail-safe mode and login as Adminitrator. Everthing goes well.Then, I reboot Windows by software to start Windows as the usual way. Then, I login on my session and it works well, I have no explorer crash and I can work.But this is not the key to solve the error because it returns to happen.
View 2 Replies View RelatedI have a Gateway computer with Windows XP. As soon as XP starts to load the system board speaker starts to beep. The beeping is not consistant and periodically beeps in a different tone. I repartioned and reformated the disk but I still have the problem. Is there any one with an idea of what might cause this. It does not appear to be heat.
View 2 Replies View RelatedI used at work, BartPE burned CD and a formatted USB thumbdrive (which I did not create) to boot my CPU's and it installed an "image" of windows XP onto the drive using Norton Ghost and everything thing moves great.I have read that most imaging software can be used to do this with BartPE. What I have not figured out yet though is how and where you put the image in BartPE when you do the "build" and then make it start ghost or the 'image' upon bootup in the cpu.
right now i have successfully created the BartPE CD and "thought" i had used the CMD to format C: drive then told it where to install the files from BARTPE to C: drive, which did not work ( i dont guess) for the computer now starts up into the BartPE without the CD rom now, but NO
I know it can be done. Sorry if it's been asked before but I couldn't think of a good way to search for it.
View 2 Replies View RelatedRecently I moved back to Australia from Washington State. I unpacked my harddrive and loaded up the computer. I noticed that the fan will kick off when I turn on the computer, or sometimes in the middle of doing something online. The computer is in a cold place so I know it's not overheating, the fan is loud and it turns off and on rapidly, and just whenever. The area around the computer is well ventilated.
View 4 Replies View RelatedYou see the problem is that when I start up my computer to Windows XP i recieve an error before the boot screen appears stating:
"Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll.
Please re-install a copy of the above file."This is not my first site i visited to try to find a solution. I have been to many explaining all different types of solutions. Luckly I am a pretty experienced computer person and also a technician, so I have a fighting chance to try to restore my pc to the proper condition.
I recently worked on a computer that has not been updated since probably 1998. When I went to IE, it immediately went to WINDOWS UPDATES. Since they have dial-up only, it was 3 hours and only at 21%, I decided to just shut it down.So now.............how do I stop the updates altogether? They rarely are on the net, they use it for work only, and since their computer runs fine, I can't see allocating that much down-time from their workday to upload the updates.
View 1 Replies View RelatedOS= Windows XP. When I turn on my computer, I get this: Log On Message: The system could not log you on. Make sure your username and domain are correct, then type your password again. Then, I get this: Log on to Windows: User name: HP_Administrator Password _________________
At that point, I do not even have to enter a password, I just click "ok" and it starts up. But the extra steps are a pain. My computer just recently started doing this. How can I turn off or disable this "log on" stuff? I've tried dinking around at Control Panel>User Accounts, but I do not seem to be able to resolve the problem.
My friend was installing Norton and it froze half way thru and she ended up having to restart. When she restarted her computer (with WIN XP HOME EDITION) it loaded fine but now with a new problem. No program will load. I cant load Word, AIM, anything. I tried to do a system restore, but i cant open the program to do that. I cant explore the hard drive because that program wont open. I cant access the control panel either. The only thing that seems to work is IE, which is useless. I got the XP cd and performed a repair, but the problem did not change. I assumed there was something wrong with the registry, but i cant run regedit. Everytime I try to open a program I get a message that says "this file does not have a program associated with it for preforming this action" For some reason, no program will load, yet the computer starts up fine.
View 18 Replies View RelatedIt always starts with (c:documents and settingsmark>) is this how it is supposed to start out.Every time I type a command it never works. I want to type this- tasklist /m /fi "IMAGENAME eq rundll32.exe" >C:undll32.txt because my pc would not let me shut down kept saying rundll32.exe was not responding. Earlier I clicked on windows card space because I had not seen it before to see what it was and it started the service,when I clicked on it again it said it was to busy to answer my request.I never heard of such! It uses rundll32.exe, I think.I finally hit "end now" and rebooted, now I got 2 rundll32.exe's.I found that command on Ramishes site under "whats the suspicious Rundll32.exe" http://windowsxp.mvps.org/rundll32.htm Anyway I thought cmd should start with "c:" and thats it?
View 6 Replies View RelatedMy Ibm Computer On Booting Up Launches In Chinese Or Japanese Instead Of English Has Anybody Any Solutions The Computer Is An Ibm R40 Thanks For Looking
View 10 Replies View RelatedI am planing to reformat my laptop and I am going to partition it so that I have one maybe 5 GB windows partition and another partition for everything else. When I say everything else I mean Program files, documents and settings, everything not in the windows folder basically. I want to do this so that if I were to defragment the windows for faster booting it wouldn't take too long. Also if i were to reformat then all i have to do is reinstall windows on this partition without loosing anything. Anyways so I figured in order for me to do that i would have to mount Program files and Documents And Settings from my 2nd partition to the folder c:program files and c:documents and settings.I would have to do this before i see any gui of windows I suppose. (Not sure if the welcome screen looks at logins based in documents and settings or not) but either way i would need it to be mounted and ready for use by windows.
So how would i execute a script before windows starts? Also how do i use mountvol to do this (no matter what parameters i try nothing happends(doesn't even give me an error just gives me the "help" display))I for some reason cannot mount a folder to another folder on another drive but i'm thinking i can use the subst utility to mount a folder to a drive and then use diskpart to mount that drive to a folder but i don't want to use diskpart so much because it needs me create a separate script file for me to run it with a script, so i want to use mountvol which supposedly does the same (according to microsofts website)