A couple of weeks ago I downloaded latest windows update and rebooted as instructed. Only the PC kept rebooting itself continuously. When I stopped it with F8 and set it not to restart on errors I got a critical windows error message. I reformatted drive and reinstalled windows, all was fine for a couple of days, then here is the really wierd thing. I heard the fan spinning but neither I nor Lady Walsh had turned the PC on. I once again found it rebooting itself in a continuous loop. Seems it turned itself on from standby and corrupted windows again. I totally wiped the disc, reformatted both partitions and reinstalled windows. Did a full Norton antivirus scan which came up clean. But the same happened again yesterday. Anyone heard of a virus that can start your PC up from standby and reinstall itself ? And that can survive a disc fomat and windows re-installation? I'm running XP Sp2 on an AMD64 with 1 Gb RAM 120 Gb disc.
my system has been acting up today. I got home from class and tried to install my Microsoft Visual Studio, it asked me to restart after the installation. When I did, right when it got to the desktop it said something about a registry problem has been restored and the system has been recovered. Something along those lines. Getting back on the subject, 5 seconds after it reaches the desktop it crashes. Not a hard crash, just a restart, but it crashes none-the-less. Is there a way to get around this without reformatting?(I even tried running in Safe Mode, same problem.) I can't seem to find a way to fix it if I can't even get to my desktop.
I have a Windows XP Pro SP3 totally updated.I switch on the computer and runs well. No problems are shown. At login screen I put my credentials, it starts to load my desktop and then, before anything can load appears a message saying this (or something like this):Explorer.exe must restart because it can load an application.I click on Ok and then nothing happens. I only see my desktop background.Well, I reset the computer pushing the button on the PC. I load Windows XP on fail-safe mode and login as Adminitrator. Everthing goes well.Then, I reboot Windows by software to start Windows as the usual way. Then, I login on my session and it works well, I have no explorer crash and I can work.But this is not the key to solve the error because it returns to happen.
First off, here are my computer specs (I like to get detailed): HP Pavilion a820n running Windows XP SP2 540J Pentium 4 HT, 3.20 GHz (1MB L2 cache, 800MHz front side bus)512 MB PC3200 DDR SRAM memory 200 GB 7200RPM Serial ATA hard drive.Intel Graphics Media Accelerator 900 with up to 128 MB shared video memory.Thats whats on the front of my tower. So, the title of this thread is self explanatory. I just turn on the computer and after it loads, after the desktop appears and right around when the desktop icons are loading, it just goes blank and restarts itself. Last night I did an error check for the hard drive, and it didnt come up with anything. I actually went to bed while it was scandisk or whatever, and when I got up, the computer was in its neverending cycle of resterting and crashing. I can, however, load it in safe modes, like with networking; that's what I'm using right now.
This problem only started recently but I cannot think of anything I have installed or changed that would have contributed.Some time ago, I installed Media Center 11, and when it didn't work well, rolled back to 10. Everything worked ok for several months after the rollback.About two days ago, when I attempted to start MC10, the program screen would come up, then the program shuts down with no error message.I can find no uninstall, either in the directory or in Add/Remove Programs, so I attempted to reinstall over the existing program. The installation program advised that the program I was attempting to install was already fully installed.The problem continues and I am unable to use Media Center 10.
I am confused, but I will describe this best I can: explorer.exe crashes when viewing folders or anything built on explorer.exe (I guess) at exactly 11 seconds in on them. It also randomly crashes every couple hours. Im extremely confused by all this
I started getting browser and sometimes PC crashes. At first it seemed to be browser related. But the PC would also crash when idle. I tried disabling add- ons in Firefox and opening in safe mode. Tried using Chrome but it would crash with the message that Flash had malfunctioned. Then I started getting Stop messages and BSODs.I hadn't installed and new hardware and, I don't think, installed any new big programs except for updates to existing ones.
I emailed a few of the mini dump files to a friend. He said they didn't specify which drivers were causing the problem. But it might be something to do with the video or the network card. I rolled back drivers. No change. I updated drivers and uninstalled lots of programs. For a month everything seemed stable. Then the BSODs started to return. Infrequently at first but then more regularily. Sorry the story is a bit confused but it is difficult to remember every detail of what happened and the order I did things in.
ever since I installed xp I've been having this problem .When I'm done useing my computer I shut it down and walk away.I saw it shut down I heard it shut down it is shut down.When I return into the room the computer is up and running and I've seen it turn on by it self.Is there something somewhere that i need to set?
when my windows xp boots up...everything starts up except that the yahoo and msn messengers as well as the broadband connection dialin link doesnt works till like a minute or so after windows has got booted...it seems like the windows waits for something to load for about a minute and then after a minute the hard drive shows some activity and yahoo,msn and the broadband link comes up and i can only dial the link then...this 1 minute wait for the connection to be connected is really annoying me...from the task manager i c that 2 services imapi.exe,alg.exe and wmiserve.exe starts up after the freezing time of the windows and then net connection gets connected...if u want any more details i will let you know.
I have a Computer problem i couldnt solve.When i push the power button on my case, the fans and the Bios beep are noticed. After that it just stops, it wont go past that point.
My PC automatically starts up at exactly 12:00 every night. It starts up and shows the login window. Really annoying. Does anyone have an idea on how to turn this off?
well it does not hesitate when i first start the pc but after about a half hour everything starts hesitating. programs wont respond as quickly as they should. not just one program but everything i try to do is just overall slower than normalive run virus scans and no viruses. any ideas? its a windows xp pc with amd 3400+ prossesor and 512 mb ram.
When I switch on the main power, the computers starts automatically ie. without switching the CPU. The following message is displayed on the screen 'CMOS settings wrong.Press F1 to restore defaults and continue' Upon pressing F1 the machine starts. I do'nt know how to set CMOS settings right Time/Date settings change automatically.
I cannot install any software.Messages like file missing.Cannot open installer pkg.Contact your vendor etc. I do'nt have the installation cs availablewith me.However when I try to repair/reinstall with the help of my other win xp cd, i get the message 'key no. is wrong.I cannot format the c: drive from within.
I turned my pc on today which runs on Windows XP Pro. Every time the computer starts I get four or five options Safe Mode, Safe mode with Prompt, Last well know configuration, etc (most ppl know what I mean here.)
Every time I click on any of the modes my computer restarts. Just before the pc restarts I see a blue screen quickly flash (i know this is know as the 'blue screen of death'.)
I have put in my XP cd but i cant get it to run so i use recovery not even when I run it from my BIOS Screen
Everytime I launch an IE window (v6.0.2900) a SVCHOST.EXE process starts and uses 100% of the CPU. If I kill the process all is fine until I start another IE instance or window.I have tried replacing SVCHOST.EXE in c:windowssystem32 with no luck and I have also run the MD DIAGS to see if they had any suggestion
I have an eMachines Mod. T2642. OS WindowsXP Home sp2. When I plug in the power cord, the fans start up and the HD LED starts to flash and there is a clicking sound coming from the cpu. This is as for as it goes...no p.o.s.t. no nothing. The power switch will not turn the system off.
I have a Gateway computer with Windows XP. As soon as XP starts to load the system board speaker starts to beep. The beeping is not consistant and periodically beeps in a different tone. I repartioned and reformated the disk but I still have the problem. Is there any one with an idea of what might cause this. It does not appear to be heat.
I used at work, BartPE burned CD and a formatted USB thumbdrive (which I did not create) to boot my CPU's and it installed an "image" of windows XP onto the drive using Norton Ghost and everything thing moves great.I have read that most imaging software can be used to do this with BartPE. What I have not figured out yet though is how and where you put the image in BartPE when you do the "build" and then make it start ghost or the 'image' upon bootup in the cpu.
right now i have successfully created the BartPE CD and "thought" i had used the CMD to format C: drive then told it where to install the files from BARTPE to C: drive, which did not work ( i dont guess) for the computer now starts up into the BartPE without the CD rom now, but NO
Recently I moved back to Australia from Washington State. I unpacked my harddrive and loaded up the computer. I noticed that the fan will kick off when I turn on the computer, or sometimes in the middle of doing something online. The computer is in a cold place so I know it's not overheating, the fan is loud and it turns off and on rapidly, and just whenever. The area around the computer is well ventilated.
You see the problem is that when I start up my computer to Windows XP i recieve an error before the boot screen appears stating:
"Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll. Please re-install a copy of the above file."This is not my first site i visited to try to find a solution. I have been to many explaining all different types of solutions. Luckly I am a pretty experienced computer person and also a technician, so I have a fighting chance to try to restore my pc to the proper condition.
I recently worked on a computer that has not been updated since probably 1998. When I went to IE, it immediately went to WINDOWS UPDATES. Since they have dial-up only, it was 3 hours and only at 21%, I decided to just shut it down.So now.............how do I stop the updates altogether? They rarely are on the net, they use it for work only, and since their computer runs fine, I can't see allocating that much down-time from their workday to upload the updates.
OS= Windows XP. When I turn on my computer, I get this: Log On Message: The system could not log you on. Make sure your username and domain are correct, then type your password again. Then, I get this: Log on to Windows: User name: HP_Administrator Password _________________
At that point, I do not even have to enter a password, I just click "ok" and it starts up. But the extra steps are a pain. My computer just recently started doing this. How can I turn off or disable this "log on" stuff? I've tried dinking around at Control Panel>User Accounts, but I do not seem to be able to resolve the problem.
My friend was installing Norton and it froze half way thru and she ended up having to restart. When she restarted her computer (with WIN XP HOME EDITION) it loaded fine but now with a new problem. No program will load. I cant load Word, AIM, anything. I tried to do a system restore, but i cant open the program to do that. I cant explore the hard drive because that program wont open. I cant access the control panel either. The only thing that seems to work is IE, which is useless. I got the XP cd and performed a repair, but the problem did not change. I assumed there was something wrong with the registry, but i cant run regedit. Everytime I try to open a program I get a message that says "this file does not have a program associated with it for preforming this action" For some reason, no program will load, yet the computer starts up fine.
It always starts with (c:documents and settingsmark>) is this how it is supposed to start out.Every time I type a command it never works. I want to type this- tasklist /m /fi "IMAGENAME eq rundll32.exe" >C:undll32.txt because my pc would not let me shut down kept saying rundll32.exe was not responding. Earlier I clicked on windows card space because I had not seen it before to see what it was and it started the service,when I clicked on it again it said it was to busy to answer my request.I never heard of such! It uses rundll32.exe, I think.I finally hit "end now" and rebooted, now I got 2 rundll32.exe's.I found that command on Ramishes site under "whats the suspicious Rundll32.exe" http://windowsxp.mvps.org/rundll32.htm Anyway I thought cmd should start with "c:" and thats it?
My Ibm Computer On Booting Up Launches In Chinese Or Japanese Instead Of English Has Anybody Any Solutions The Computer Is An Ibm R40 Thanks For Looking
I am planing to reformat my laptop and I am going to partition it so that I have one maybe 5 GB windows partition and another partition for everything else. When I say everything else I mean Program files, documents and settings, everything not in the windows folder basically. I want to do this so that if I were to defragment the windows for faster booting it wouldn't take too long. Also if i were to reformat then all i have to do is reinstall windows on this partition without loosing anything. Anyways so I figured in order for me to do that i would have to mount Program files and Documents And Settings from my 2nd partition to the folder c:program files and c:documents and settings.I would have to do this before i see any gui of windows I suppose. (Not sure if the welcome screen looks at logins based in documents and settings or not) but either way i would need it to be mounted and ready for use by windows.
So how would i execute a script before windows starts? Also how do i use mountvol to do this (no matter what parameters i try nothing happends(doesn't even give me an error just gives me the "help" display))I for some reason cannot mount a folder to another folder on another drive but i'm thinking i can use the subst utility to mount a folder to a drive and then use diskpart to mount that drive to a folder but i don't want to use diskpart so much because it needs me create a separate script file for me to run it with a script, so i want to use mountvol which supposedly does the same (according to microsofts website)
Both usb and ps2 keyboards work when going into bios or using a OS on a disk, yet will not work after windows boots. Every other thing works great usb mouse, joystick, etc. I have uninstalled keyboard in safe mode, then rebooted. I tried a repair with OS disk. No software problems. Running lots of mal-ware protection. Using on screen keyboard is getting old fast. Has been this way for awhile as I keep expecting other problems and then I'll have to do a OS reinstall last resort.But no other problem have surfaced, so I keep putting it off.
i have a HP 522N and for some reason the computer is not turning on. when i plug in the power plug the green light lits on in the back, and then i push the on button in the front the button turns orange (isnt' it suppose to be green?) and the fan starts but the computer is not on, i can not see anything on the monitor. what's happening?
I have been having a problem with a CD burner program attempting to install when I "right" click on one of my drives (A, C, D, E, or F) from the My Computer screen.An install application comes up and wants me to insert a disc so a program can install.What I want to do is get to the properties tab so I can see how much I have on the C drive.I am sure there is another way to do that so my real problem is in correcting whatever is causing this install to start whenever I right click on one of the drives.I have right clicked on other icons on the desktop and that functions properly, as well as two folders in the My Computer "folder".
