I am trying to get XP installed onto my old computer.I can boot into UBUNTU Live CD.When the XP CD starts to boot and I get the "press any key to boot from CD". When I press a key, the screen goes black and just sits there.I have tried to burning a new disk and even tried XP 64 bit instead.
View 1 RepliesI've recently purchased an HP G50 laptop, and decided to wipe off Vista and install XP - I did this with a few laptops before, no problem. However this laptop is proving to be a real headache. It won't boot from the Windows XP install CD at all The furthest I get is at the "Press any key to boot from CD" prompt, then the screen stays black. I booted without the hard drive to see if this was causing the issue, but the problem persisted. The CD had no problem booting on 4 other machines. I tried a different CD and that didn't make the problem go away. The laptop will boot any Linux install/live cd I shoot at it, yet it refuses to boot the Windows XP install CD.
View 8 Replies View RelatedI have an hp pentuim 4ht: 3.4 processer,2ghz memory,80 gig for o/s and 250gig as a slave... but I have problem while trying to install xp black edition(dvd)it gives me a blue screen immediately.
View 1 Replies View RelatedMy computer was having some issues so I manually re-installed windows media center edition on my Dell 9300 laptop using the disks Dell provides ( run on sentence). Formatted and re-intalled everything went great. Added all software-everything great. However during the install it asked where to load the new operating system there were 3 or 4 places to load, screen said to load to biggest partition. I did. Why are there so many partitions and are they needed? Do they take up space? Also now when the system reboots a black screen shows up and says which operating system do you want to load, they are both the same I leave it at the top one and windows loads with no problems. How do I either get rid of this bogus operating system or diable this page from coming up?
View 1 Replies View RelatedI want to install Windows XP Professional edition on my old PC which is currently running Linux Fedora Core 6.0. the problem is after I boot the Windows XP CD, it says configuring the hardware and stuff like that, but then it goes black and nothing happens after that.I had Windows XP on this computer before and it was fine, the only thing I have changed is the monitor, which is now a very old Dell e770p. might that be the problem? or is it the CD problem? (I could open the content of the CD in my Linux Fedora though)
View 7 Replies View RelatedI never thought that I, who can usually troubleshoot problems on my own, would be posting this, but here I am I have a Dell 8400 computer that is about 6 months old. Recently, I tried to install Debian Linux onto a spare IDE hard drive that I had. I did so, and rebooted to run off of my Windows SATA drive after I had installed linux to the IDE drive. I had to leave the house, but when I came back, a black, blank screen greeted me. It had been over two hours and Windows normally boots in less then a minute tops. I resarted, booted off of the correct hard drive, got the NTLDR prompt with the correct boot.ini information and selected the option to boot WIndows XP Normally (my other option is a /safeboot). Black Screen Again! I know that my files are still on the drive, as I can boot into Debian and mount the drive and everything shows up fine and can be accessed. I also can read files fine by booting off of a UBC4Win or BartPe disk. The power supply, videocard, and heatsink fans all are running fine, so the issue is most likely a driver issue.
View 6 Replies View RelatedAfter i start my computer, everything goes fine until the Windows XP boot screen. It screen appears for about 3-4 seconds, than it stops thinking. After that I get a black screen for about 5 minutes. Than it finnaly boots. Anyone who can help this problem?
View 14 Replies View RelatedWhen I boot up I get a black screen with the following error message: ISASS.EXE failed to initialize properly. 0xc0000006. Click ok to terminate the application.When I click ok the message goes away and everything freezes with a black screen.
View 5 Replies View RelatedI have a Dell Personal Computer that is not booting into windows and you can't even see the Bios screen. It is just a black screen on boot.I tried another hard drive in the computer, but the same result happened. Tried the Hard disk from the faulty computer in another Personal Computer and it wouldn't boot up either.
View 14 Replies View Related Well i am trying to install a fresh copy of XP and the CD is bootable and the CD drives all work ok, i have tried 3 different CD Drives but when i goto start the boot sequence i get an message saying:
Searching boot device
No emulation
Press any key to boot from CDrom....
I press a key and the cd drive starts off but the screen stays black and does not do anything.
I have never seen the message No Emulation under searching boot device before
I was trying to reinstall windows xp home editon because my computer was infected with a virus that could not be deleted even after trying norotn and mcafee. The CD-Rom drives were deleted from the virus,so I had to transfer the xp cd files from one computer to the infected computer through a direct transfer cable During the xp installation, the computer hung and showed a black screen when installing the devices. Now everytime I start the computer up it goes straght into setup and shows a black screen.The CD-Rom drives do not work pressing delete during start-up will not access the BIOS.It seems I cannot flash the BIOS.How do I cancel the xp setup?
View 2 Replies View RelatedIm running XP and I decided to turn down my computer since it had been OCed. I went into the Bios and chose Load Optimized Defaults, saved to CMOS. Once the computer rebooted it would go through all its checks then the screen just goes black, So I went back in and Loaded Fails safe defaults to CMOS and the same thing.
View 1 Replies View RelatedI've just got an old XP machine out of storage, and gone to boot it for the first time in about a month. It's a dual boot with 98 on it which is never used.The boot process begins, seems to go through the correct startup procedure and detects all 3 drives. It goes through the BIOS startup ( the motherboard has LED's which show FF, I understand that this means the MB has completed the BIOS startup). It then moves to the 'choose your OS' page where you select the OS to boot. After the timeout completes, the screen goes dark, and nothing else happens. The PC keeps running, but nothing else happens. I've left it for 10 mins, and there is no change.
View 3 Replies View RelatedWin xp, turn it on and I see the black & white screens telling me about hd info and I am seeing something about ide conductor 80, it goes to fast for me to see. Anyway it shuts down at different times. I cannot get it to windows. This is a cutom built machine. One thing I did notice is when I tunr the comp on all fans start to turn other than the Power Supply fan. Should this turn on as soon as there is power to the computer ?
View 11 Replies View RelatedVista on laptop and now want xp back on it. so i put this disc in that deletes everything and copys new files so i thought windows xp would of been back on as i have done it before. but i get a black screen saying BOOTMGR is missing. all i want to do is to get my xp back and it keeps saying ctrl alt delete.
View 14 Replies View RelatedA few weeks ago i had a problem with my computer where it would boot up until the XP logo with the blue scrolling bar, where it would freeze. I tried everything until i had no other choice but to format and re-install windows. Since this my computer has been very slow starting and increasingly so over the past week or so. After a defrag a couple of days ago it has pretty much gone haywire.I repeatedly got explorer error messages followed by dr watson debugger errors. Other problems include seemingly random restarts and general slowness after booting. Upon starting it this morning, it gets past the xp logo but then just displays a black screen. If i press space it asks me to select a hardware profile but this just does the same as previously mentioned. Also the hard drive light on the case is on constantly, as if to indicate that it is doing something.
I cannot boot into safe mode, as the system freezes at 'Mup.sys'. There is not much that i can do seeing as i can't get into windows. I also do not own a windows xp cd as my computer is a HP and did not come with an xp disk. i do however have a copy of their recovery disk, but i want to avoid using this as it will only wipe all my data which i do not want to lose.I am beginning to think it is the motherboard. any thoughts? temperature is at about 78 C at the moment, which sems about normal. both fans seem to be running as normal.
This is really BAD. I've never heard of this happening quite like this, but here it goes:XP will NOT boot at all. There is no sign of anything on the screen whatsoever. I can't get into safe mode, nor use a bootdisk as far as I can tell. I cannot get any control through the keyboard or mouse, apparently. It's as if the computer is not connected to the monitor. I bought this computer from a friend one year ago. He is knowledgable, and had cleaned it up quite well. It had XP installed as well as the usual stuff like IE5/IE6, Mozilla, Adobe, Zone Alarm, etc. He had 2 HDDs installed, partitioned into 5 drives, for a total of almost 175 GB. Athalon 2100 CPU, 512 RAM (IIRC), Audigy 2 Platinum SoundCard
View 11 Replies View RelatedI have an Intel DG31PR with 1 GB memory and Windows XP Home. When I turn the computer on the Intel logo and BIOS 2 settings appear then the screen goes back with a flashing cursor at the top left of the screen . I have to reboot several times before I can login. How do I stop this from happening?
View 3 Replies View RelatedWhen i go to boot a pc(my friends), it come up and shows the emachines logo screen then it shows the windows xp loading screen but then the screen goes black and nothing happens.so i restart it and a screen comes up that says the CMOS and Video BIOS are shadowed.i treid removing the battery from the motherboard for 5 mins and still same problem.
View 1 Replies View Relatedwhen I boot the computer it comes up with a black screen , white lettering and it says select startup system to start there are 2 choices ( help and Microsoft windows XP ) and there is a timer counting down allowing me 30 seconds to make a choice using the arrow keysIf I select windows XP the computer goes through the boot sequence and windows starts.If I let it time out or select the "help" It takes me to a second screen that has several options
View 12 Replies View RelatedI have a rig with some form of linux i put on there months ago and now i want to install xp home sp 2 on it. i have done many xp home installs and im using the disk from my good rig the one whos specs i have listed because i just put vista on this one. now whenever i put in the xp home disk it starts like normal by saying press any key to boot from cd.... i hit enter and then the black backround stays but no text ever appears. after about 10 min the drive stops spinning.
View 4 Replies View RelatedI cannot start up XP. When I do a black screen comes up to try and boot up in other modes,( safe, normal, with previous configuration etc). None works. I went to BIOS message and it states an IDE driver for Fasttrack is missing/ not connected?
View 8 Replies View Relatedi have a Gericom Official Notebook computer, it will not boot up at all, the power comes on and i think its the fan i can here spinning, and the lite comes on, so the power ok. the hard drive light flashes twice But the screen is totally black, and there is no POST beep.
View 4 Replies View RelatedA few years ago, my P3 733/GeForce 256 system running Windows XP stopped booting up. I would see the logo screen, the bar would go almost all the way across, then the screen would go black and the monitor went into standby mode. Attempts to repair my installation, and even clean installs didn't work. The RAM is fine, the video card appears to be fine... I can't find any hardware problems
View 4 Replies View RelatedMy computer has been acting screwy. While i have been playing a game my screen would freeze and black out, or just suddently black out.so i would have to shut it off through the back switch. this was happening for about a week. This problem happened again last night only this time it wont let me boot back into windows. it will boot up to the windows logo loading screen and restart, after this restart it will tell me windows did not boot properly and ask to continue with safe mode with networking, and console.(still rebooted with all choices) and windows normaly (rebooted) and windows with last safest configuration (still rebooted). occasionaly it will get to scandisk, after the scandisk it will lock up or reboot, if it gets passed scandisk without rebooting it gives me a blue screen
View 1 Replies View RelatedI cannot boot my XP machine. In safe mode it also says safe mode in white text in each corner and shows windows build details at the top. I have trying going back to previous good config - same problem. A normal boot just leads to a black screen with a movable mouse arrow - no sign of a login screen. I have tried a recovery reinstall from a an XP pro CD from another computer - this took about 40 minutes and went through all the steps normally (with normal graphics displayed duting the reinstall) but after finishing the same problem is still there.
Only now the windows build info in sfae mode reports SP1 (originally didi not as the computer was supplied with XP before SP1) I am at a loss to know what to do to get the machine wordking without a refomat of the hard disk, whcih will destroy all my data, and my partners stuff too - mostly not backed up, as usual.
I left a MICROSOFT WORD CD in the player and shutdown, the next day I turn on the computer and the CD started up, and it has gone to black screen with cursor each time I start it now. I get 2 choices, F2 or F12. The 4 code lights on the back panel are all green indicating no problems, what can I try?
View 1 Replies View RelatedMy computer shutdown and on boot up it hangs at the black screen showing the white bar at the bottom. I have Windows 98 and 2000 on my computer and neither will boot up from C:, CDROM, or StartUp/BootUp disks. When I try to boot up from the Windows 2000 boot up disk it sometimes will not get passed the blue screen showing 'Windows 2000 setup. Once or twice it has shown some functions in the bar at the bottom of the page. I have tried to boot up using Windows 98 start up disk but most times it hangs at C:. Last night it did open Windows 98 but would not let me reinstall 2000 or do a repair. It now is hanging in both OS. I am told it could be my memory...but how do I check? Upon start up my memory check shows all is okay. I have ran the utility disk for my hard drive and it says all is okay. Before I invest in new memory is there anything else I should check or try? My computer is older and the memory is quite expensive.
View 8 Replies View RelatedPowers on to the normal blue screen. Black screen comes up that says We apologize for the inconvience...etc. etc. windows did not shut down normally and gives the option for last know good configeration, start windows normally, safe mode, etc. Tried them all and it just goes back to the normal blue screen and back to We apologize for the inconvience. F10 system recovery does the same thing.I would like to be able to fix this and not lose any of the information I have on my hard drive. I did a total back-up about 7 months ago (13 DVDs worth) and do have some backup through Norton 360
View 11 Replies View RelatedMy main pc is stuck in a boot cycle giving me the black screen with options to start in safe mode etc etc and when selecting one of those options it reboots to the same point. When I press return the system tries to start it attempts it, clicks then goes back to boot cycle. The Windows XP system disk won't cut in like it should so I cannot gain control of the pc.
System is a Dell, 2years old and has had various viruses despite having the usual protection. I am currently using my old trusty Advent Pentium 3 for this message (which has never had the same degree of virus prob's curiously). After the first virus Dell talked me through using Ghost - brilliant. Within a couple of days it was hit again and usinng Spybot got rid of the virus but PC kept displaying the message rundll.dll file damaged. So I used XP Recovery seemingly with no problem only to find it won't reboot.
I just upgraded my system a couple days ago and have been having several issues. First, Vista wouldn't recognize my onboard sound and LAN from a fresh install No available drivers, go figure. So, I had to install two copies of Win XP SP2, and then upgrade one of them to Vista. A pain, but the only way I could get everything to work properly.
I got everything where I wanted it, life is good. Then I'm booting into Win XP and I have two identically named Win XP OS's in the bootup screen. So as not to confuse my wife, I went into the Startup and Recovery options menu (Again this is in XP) and deleted, what I thought, was the XP I used as an upgrade to Vista. Turns out I got the wrong one. Now I can't boot to XP, but Vista is working fine. Basically, when I choose "Earlier Versions of Windows" I get HD activity for a moment, but then everything seems to halt. No responce from the keyboard, so I have to do a Hard Re-Boot.