Quote: Windows could not start because the following file is missing or corrupt:
<Windows root>system32hal.dll.
Please re-install a copy of the above file." That message appeared after trying to reboot my desktop earlieir today. I immediately got on my laptop and started google'ing a solution. I came across this page:
http://pcsupport.about.com/od/findby...singhaldll.htm
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
All my desktop icons are missing ,start menu missing, only thing i could see is wallpaper on desktop right click is laso not working,i could only use ctrl+ alt+del to open task mgr and run a program what should i do to take them back.
View 10 Replies View RelatedI have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies View RelatedWhen I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
View 6 Replies View Relatedrestarted the computer just coming off of vista and I boot up xp after logging in at first the task bar appears for about 10 seconds and then just vanishes. I bloody hate my PC. I mean the whole task bar is missing, the start bar is there if I click 'CTRL ESC'OH And I do have a 'media center' theme running.
View 7 Replies View RelatedOn my other Windows XP, I cannot get windows to start or something.I start up the computer and I get to the log on screen and I log on.However, then a window pops up saying "wininet.dll" could not be found and explorer.exe couldn't load. Then my desktop does not show up and the start menu doesn't, and it's just my background.
View 3 Replies View RelatedI had a registry problem based on my description. JJ suggests repair using MS registry repair and rewriting software. Can I use the software if I can not boot up? Do I simply start the system with the repair software loaded in the drive? Emachine 4160, XP Home. Error message, " Windows could not start because the following file is missing or corrupt, WindowsSystem32ConfigSystem. I tried tapping F8 during startup to get to
Safe Mode, no luck. I can use the restore disc to reload but I want to save my wife's pictures on the exiting hard drive.
windows won't start because this dll is missing after uninstalling some programs.
View 7 Replies View RelatedI have had the following error message appear when i start my PC NTLDR Missing, When i press ctl alt del to restart the same things happens and i go around in circles. I have put the XP disk in to hopefully boot from that but the PC will not pick up the disk and start from it. I have looked in the bios to change where the system is looking but still no joy, can anyone else point me in the right direction?.
View 14 Replies View Relatedwas cleaning up PC, ran spybot/virus scan then turned my attention to the hard drive. When I ran Error Checking though, it took MUCH longer than normal and when I rebooted the taskbar was missing and IE would no longer start. This is XP Prof SP2 btw. I checked the obvious taskbar settings, tried restarting explorer.exe via task manager, ran sfc, undid the changes made by spybot and still nothing. I also tried to system restore, but it wont let me load it, saying "system restore is not able to protect your computer. Please restart your computer and try system restore again."
View 5 Replies View RelatedI was cleaning up my brothers labtop, ran spybot/virus scan then turned my attention to the hard drive. very routine, but when i ran error checking it had a lot to work with (took much longer than normal) and when it finished I booted back up to find the taskbar missing and IE no longer working. Ive tried restarting explorer.exe via task manager, did a sfc, and reversed the changes made by spybot. System restore gives me an error when I try to start it, saying it cannot help my system.
View 2 Replies View RelatedI have lost the start button and the task bar. How do I go about restoring these items.
View 1 Replies View RelatedI turn on my computer today and everything loads up. I click on fire fox to do my usual morning surfing and then I realize I have to check my outlook express. I minimize the firefox and it DISAPEARS! Not reduced to the task bar thing, becuase it (Along with the Start Button) are gone! How do I get them back!
View 7 Replies View RelatedI have xp and when i start my cmputer i get this Windows could not start because the following file is missing or corrupt windowssystem32configsystem,I don't seam to be able to enter safe mode with f8 pressed.
View 1 Replies View RelatedWhen trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies View RelatedI've recently had some corruption to my c: drive as a result of resizing using Partion Magic 7. I managed to run chkdsk via Recover Console and was then able to boot.But now the Task Bar does not show. Also it thinks there is new hardware. I can run some application via the icon on the Desktop but not others. Does any one know of a way to resolve this? Am I running XP sp2.
View 1 Replies View RelatedI shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
I was unable to start Windows XP and was in a sort of start-up loop. I reinstalled Windows and I have had to start again from scratch. Everything seems to be working OK but when I start up each day I get messages to say that certain files have been lost due to a hardware or network failure and to save these files elsewhere.
View 3 Replies View RelatedI was recently given a compaq sr1330nx desktop computer that didn't work. After putting in a different power supply it started right up. It hadn't been used in over a year and I downloaded the 62 high priority updates needed and installed them. The next morning when I started it up it was very slow and unresponsive. I ran the error check utility and defragmented the hard drive. Still very slow and inconsistent. Then is when I probably screwed up and reset the 2 jumpers on the motherboard and went into the bios and checked "reset configuration". Now all I can get is a line of white bars across the bottom of a black screen and the message "windows could not start because the following file is missing or corrupt: C:windowssystem32configsystem. You can attemt to repair this file by starting windows setup using the original setup cd-rom. select 'r' at the first screen to start repair."
View 5 Replies View RelatedMy son in his wisdom decided to clear some of his long long list of updates from his Laptop and get a set of fresh updates. Now he can't start Windows or in Safe Mode. Where Explorer.exe cannot start, because a normaliz.dll is missing and it freezes the cursor and keys on the log-on page. Can't get to restore or etc. Done a chkdsk, all ok. Can this be repaired using the XP CD in recovery mode, if so how.
View 8 Replies View RelatedI think this is a major problem I did a system restore on my home pc and it went to the hardware screen showing NTLDR is missing, I assume its a windows file and although it says press cont+alt+del to restart, it doesnt work , can anyone help as I dont have a windows XP cd as it came already set up, also how on earth has it happened simply from doing a restore?
View 14 Replies View RelatedWell, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
View 11 Replies View RelatedI Had A Trojan On My Computer, And A Few Viruses, I Think I Have Got Rid Of Them, But Yet I Still Cant Get My Icons Or Start Menu To Appear, Safe Mode Or Not. The Icons Arent On Hidden. I Have Tried Everything. I Dont Have A Boot Up Disk Either For Windows Xp
View 8 Replies View Relatedim using windows xp on a computer i just bought recently. im not sure what happened but since last week, the menu on Start > Programs is missing, its totally empty. some other programs, windows media player and my ie also stopped working, the programs hang the minute i open them. i cant access my computer's profile settings or search. I have absolutely no idea what happened.
View 6 Replies View Relatedstart button missing from bottom of screen.
View 11 Replies View RelatedLast night, my PC started randomly restarting when I was copying files from a CD. It did it a few times, and I thought it may have just been overheating. However, now when I start my computer now, there is no BIOS and just a blank screen which is there for a good few mins. Then the loading bar (You know the one, White rectangles is all that's on the screen...just before windows loading screen) appears. However it only loads VERY slowly and when it gets to about an inch of the way in, I get a message telling me that a file is missing/corrupt and I can use the recovery console to fix it. Does anyone have any tips on how to use the console to repair this? I only want to reinstall windows as a very last resort. The file that is missing is: windowssystem32c_850.nls
View 8 Replies View RelatedThis happens every time.Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEMWhen I say every time, I mean every time.I just bought a new hard drive, so I know it works.When I try to install xp (full install), I go through the select drive and partition to installEverything looks good so far. Windows starts copying the installer files to the drive.
After its done, it reboots. I don't push a button because I know its going to start xp setup now.
I just installed Win XP on a freshly formatted C: drive of an IBM HDD using a slipstreamed XP disk.It appeared to install normally, loaded all the required drivers and configured without problems. But when booted and rebooted several times it shows a desktop with the standard background, BUT NO TASKBAR nor START BUTTON. The computer is ok because it loads XP normally from the slave drive.When I run the Task Manager it shows the startup files, explorer.exe and normal processes, but will not respond to the shutdown option.Since I can't access "Run", I can't run "Regedit" or any of the suggestions made to others.
View 7 Replies View RelatedSo my computer has been running perfectly normal lately (with the exception of a Vundo trojan infection, which I removed about 2 days prior to this)Last night I was burning a DVD (I do this all the time) and a couple hours later when I look at my computer it's at a black DOS-like screen that says the following:"Windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys"
My computer is a Gateway, so I have their restore disk. I really don't want to have to reformat Windows though. Is there another way to fix this? I have the option to "Repair" using the Gateway restore disks too, but I'm worried that will either delete my files or screw something up
i turned on computer this morning and got an error message that said "windows.32.configuration is missing" What should i do?, the data on that computer is very important
View 1 Replies View Related