Ethernet Controller - Have A Gigabyte P35c-ds3r Mother Board
Jun 29, 2008
I reformated my pc yesterday and i got windows installed again, but i cant get online ...wen my pc starts it says Ethernet controller found, but wen it searches the pc for it it cant find it..so i cant get online ...can someone help me on what i have to download to make it work.. i have a Gigabyte p35c-ds3r mother board, and a intel(r)core(tm)2 duo cpu e6850 proccessor..please someone help it sux without internt
This may seem like a noob question but i was wondering if i will need to replace windows if i get i new motherboard. My computer is a HP workstation and it came with windows XP professional.
since i already have it on my hard drive will it just not boot with a different motherboard?
i just installed a new msi g31 board along with intel processor. after installation i tried powering off computer but the os shuts down leaving the board still powered up with cpu fan and other case fan still running. I hold down power for more than 5 secs, same result. I have to power off from psu switch from back of tower. Can u give me some in sight to resolve this issue?
The mother board of my hp laptop died. I have another laptop (Dell). Any ideas how I can transfer the data on the hard disk of the old hp to the new Dell?
channges i have made before the problem occurs: > installed VISTA INSPIRAT2 > system worked for 1 day > system stopping at the startup process "windows is starting" > mother board is not deetecting > but motherboard is working with another PC. > i cant able to press F2 or F8 bcz M.B is not detecting > so,i have used PS/2 to USB converter and connected M.B to USB port , M.B detected but not working with my computer,but working with any other computer.
I have a compaq computer and have a problem with the restore cd from compaq. I needed to reformat the hard drive because of some crup files. When I put the restore cd in the computer is says the cd's are not for this compaq. I taked to compaq and gave them all the information they ask for and was told that I had the correct cd and it must be a bad cd set. They had me order a new set of cd's from there online store which I did with the part number they gave me after I double checked the number to see if they were correct and I got them in yesterday and still had the same problem. I talked to hp again last night and was told that the mother board most likely needed to be tatoo to match the cd's. I was told to take it to one of there repair stores to have this done. Never heard of a mother board changing it's self.
I want to unplug everything from the existing mother board, remove it, and slide in a new mother board, reconnect everything, boot from the Win XP CD, do a repair and take off running without having to re-install all the application programs. Will this work, or do I have do do a completely new install of XP and reinstall all the applications
I just had to replace the mother board on my computer Its a Asus P4PE motherboard After replacing the motherboard, I just hooked up the hard drive I was using and the computer did come back up. The new motherboard is another P4PE warranty replacement board from Asus.
The computer is working but I can't get sound or USB services The computer doesn't even seem to know that sound hardware exists on this new motherboard for some reason... The USB, I have no idea why its not working other then the fact I can't get my USB printer or camera to work... Do I have to "Reload" XP? I don't want to loose what's on my hard drive... What should I do to get this right??? In all the years I've had computers I've never had a motherboard die before so I'm not sure how to proceed!!!
So recently I got a new monitor assuming that something is wrong with my old one. But the same problem occurs, my monitor still goes blank! Well, ever since I switched my video card (same time I got my old monitor) I was experiencing that problem. People at the store are no help at all since they are so clueless!
So I came to this conclusion, its either my video card that's experiencing problems or my mother board is getting out dated or whatsoever. (I got it back in 2003 and its Pentium 4 hyper-threading) My current mother board doesn't have a monitor slot on the pentium, only has a slot where the video card is. I don't think that could be a problem because when I had my old video card,
I just formatted my comp and re-installed XP. I had vista for awhile but I discovered that it sucks. I am using a custum built computer and i cant figure out if its the driver or what
Someone reinstalled Windows XP on my son's computer, and now it is not working properly, so I am trying to help get it fixed. I have limited experience with this sort of thing. The specs on the computer are as follows: Acer Aspire 5050-3371 AMD Turion 64 Mobile Technology MK-36 (2.0 Ghz 512 KB L2 cache) It will not connect to the internet, and when you check the Device Manager, it gives a yellow question mark under "Other devices". The other devices that have question marks
required the reloading of Windows XP professional on my factory-loaded laptop. I didn't have the CD, so I went to a shop and they did it. Since then, I've been getting this "new hardware" balloon when I start up, and it asks for file "el90Xbc5.SYS on ECD541DP90X". It asks for dwinxplan to load it from. Being CD'less, I've just cancelled it before. Now I'd like to work out how to deal with it can I get this file from somewhere
I Was wonering if any one could help me find a driver for a windows 2000pro. For some reason there is none there We are haveing trouble find the ethernet controller as shown here.If any one has any advic]e please let me know i cant seem to find it anywhere and i cant get onto the internet on that computer.
I need a driver for an Ethernet Controller for an Asus system board numbered PTGD-VX in a sony Viao model # PCV-A11L Running windows XP Pro. Asus's site has been down for a few daya nd I cant seem to find it any where. I will keep looking but if some one could point me in a good direction I would be grateful.
I reinstalled windows xp. im missing my ethernet controller, multimedia audio controller, video controller (vga compatible). i'm using ASUS Motherboard model is P4 P800-VM. i lost my motherboadr cd. i have downloaded audio driver and VGA from ASUS site it works well. but i also tryed the LAN driver from ASUS site but it did not has setup files, so i dont have idea how to istall it. but i have downloaded different supposed drivers of Ethernet controller from various sites and installed in my PC but it did not work. As you can guess without my ethernet controller i have no internet acces plz help. Im using a Net cafe right now trying to fix my computer
When I go into Device Manager, under Network Adaptors, there is a question mark next to the Ethernet Controller. What do I need to do to get this up and running
I recently was reinstalling windows xp pro . after the fresh install i tried to connect to the internet nothing happened. went to the device manager and apparently the the PC wasn't reading the ethernet controller. so i went home to the dell support to download the necessary drivers needed. i even called dell to make sure i was doing the right thing. needless to say it still does not work... i opened up the CPU to try and find the actual name of the ethernet card and could not. there was a small metal box where you put the ethernet cable into. i did not see a card, yet i know there is one. sorry if I'm confusing. its a dell 8300 with no service code or service tag on it. i check inside and out
I have a HP Pavillion 522c and I just reformated it, everything went smoothly except I do not have the Ethernet Controller and the Multimedia Audio Controller. I went onto the HP site to try and find it but to no luck, maybe I wasn't looking in the right place.
I was wondering if any one could help me i fnd a driver for a windows 2000pro. For some reason there is none there.We are having trouble find the ethernet controller as shown here.If any one has any advice please let me know i can't seem to find it anywhere and i can't get onto the internet on that computer.
I had to reformat my hard drive, under the device manager the Ethernet controller has a yellow question mark, now my DSL would not connect, also I thought should be network setting under that, didn't see any. I have windows xp sp2. under PC express controller port one I have the Broadcom NetXtreme BCM5750 Gigabit Ethernet Controller)
ethernet controller i dont know how to upgrade/install the right drivers, i know thatr my motherboard is the ASUS A7V8X ... but i'm having problems finding the right drivers
my computer Dell Dimension 2350 has been running at 100% cpu usage for a while now and it started occuring after the guy who came and installed the internet left. I ran tons of spyware, adware, and virus programs and came up with nothing, i wiped the computer clean and ran a fresh install but the trouble presisted. when i'm in safe mode none of this happens, the speed is fine In process explorer it says that the DPCs and Interrupts are pretty much hogging all of the system's resources. I did plenty of reading on the internet to find out it was probably a hardware or most likely in my case a driver problem. I got Driver Genius to update all of my drivers and now i see the only one that doesnt even have a driver and is saying there is an error for is my ethernet controller. It tells me that there is no driver installed for it yet it's still working. I'm not sure how i find what brand of controller i need the drivers too
After installing Windows XP Home last night, I updated to SP3, installed drivers from toshiba.com. However, installing the driver for Ethernet controller didn't work from toshiba.com. Realtek ethernet is listed and working in device manager. This ethernet controller with yellow question mark maybe from the wireless card? The wireless xp utility is not in the system tray. I have an atheros internal wireless card. This is a Toshiba Satellite A25-s2792 laptop
I need to track down drivers for my Packard Bell Imedia 3082 XP Pro service pack 3 desktop. I have been to the packard bell support/drivers site and found 5 out of 7 missing drivers. I had tried the suggested site previously but when i clicked on download products i kept getting a "server not found message". Tried it yesterday again and it worked so thanks to the people who suggested that. Problem now is I am still missing my ethernet controller driver and my multimedia controller driver. I dont know the exact device details in order to download the two missing drivers. to tracking down the ethernet and multimedia controller. I have downloaded and installed the multimedia driver from the Pack Bell Imedia 3082 site but still it is yellow with exclamation mark. And i still cant connect to my Belkin router. So in brief: I need the device details to my ethernet controller and multimedia controller so that i can track down the drivers.
