Doesn't Even Pop Up At Startup
Jan 30, 2006
I don't know what I installed or did wrong lately to have this blue screen to keep popping up when I open the computer. It happens randomly, but more frequent as of now. The blue screen says "Windows has come to a problem and shut down to prevent future damage to your computer," or something of that nature. Then it further goes into saying that I should check my computer if there's enough physical memory. I have a total of 70.3 GB total HD space, and 17.3 GB is free, how can it be the physical memory problem? I have 512 MB RAM, in which about 250-300 is free, and the remaining is usually running. The problem sometimes doesn't even pop up at startup, it sometimes pops up when I'm working on the computer. This error shutdown is sometimes accompanied by lagging, or is followed with multiple programs functionally at very slow rates.
View 14 Replies
ADVERTISEMENT
Apr 16, 2007
Dell Optiplex running WinXP Pro from a reinstallation, not OEM, At startup I always get a window telling me I have "used the System Configuration Utility to make changes to the way Windows starts", which is totally untrue.It then offers me a box to check to "Don't show this message or launch the System Configuration Utility when Windows starts". I haven't checked the box (yet) because I'm afraid I won't be able to ever launch the Utility. So my question is: if I check the box to keep ity from launching at startup, will I be able to run it later run/msconfig?
View 1 Replies
View Related
Oct 24, 2007
I'm Currently Dual-booting between Windows XP and Fedora Core 5 on my laptop. I no longer want FC5 so I thought I would format that partition to regain my hard drive space. I thought the easiest way to do that would be to boot from my windows CD, but discovered that my System won't do that anymore (I know it used to, because thats how I installed FC5 in the first place). It won't boot from my FC5 cd's either.So I tried to access the BIOS to see what's going on, but for some reason I can't. The startup screen tells me to push F2 but that doesn't work.
View 9 Replies
View Related
Jan 15, 2008
Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem.
The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.
View 2 Replies
View Related
May 16, 2007
I want a program to run at startup and I want to be able to change what I have done at any time.
There are a number of unchecked entries in msconfig and I have to use Selective Startup all the time.
If I want to revert to Normal Startup under the General tab instead of Selective Startup, the program's box automatically rechecks itself in Startup.
The Startup tab gives me a handy record of what I did and allows for an easy change of mind so long as I continue to use Selective Startup.
If I edit the Registry to stop programs running at startup, they won't show in msconfig and I lose the handy record of how it was and I may have to reinstall the program to go back to it running at startup.
I would like to accomplish this:
1. Use Normal Startup instead of Selective Startup.
2. Have some programs not run at startup, but be able to easily change back to having them run at startup.
3. Have a readily accessible list of those programs and the details as shown under the Startup tab as a reminder of how it was without having to manually enter it all into a text file or keep a notebook or reinstall.
Is there some way to use Normal Startup, stop programs running at startup, but retain or find a list of those programs (including the details under the headings Startup Item, Command, Location) that is shown when using Selective Startup with unchecked boxes under the Startup tab?
To put it another way, use Normal Startup but somehow retain the convenient flexibility of Selective Startup.
View 7 Replies
View Related
May 8, 2010
My startup time went up drastically.
I have disabled all but two of the automatic startup items using msconfig. My system used to start in less than two minutes, easily. Now it takes a more than a minute or two longer than that.
I know what the problem is; the only three items that show in the system tray after startup are:
1) The AVG Antivirus icon .
2) The Spybot SD Resident icon.
3) Local Area Connection (This is the icon which shows two computer monitors with screens that light up and go dark periodically)
Now, after the problem started, the last item, the Local Area Connection icon is the one that doesn't load, for VERY long. So it may be something to do with that. Also, just before the icon finally shows up(after which point the computer is fine to use) I've notice that a Windows security notification icon appears...it flashes, for just a second, and then is replaced by the Local Area Connection icon. For the record, these are the two icons I'm talking about:
http://i131.photobucket.com/albums/p282/sw1sh1/LAC.jpg
http://i131.photobucket.com/albums/p...tification.jpg
I have had my automatic updates disabled for a while now, so you might think that that's the reason the notification is showing up but I've already disabled that notification using Windows Security Center.
View 14 Replies
View Related
Jun 10, 2010
Try making my laptop less slow and not freeze all the time when doing the simplest of tasks.
However, my problem happens after trying to disable the Startup Items from the MSconfig dialogue.
-After I have unchecked the boxes I don't want, I click OK or Apply;
-It then tells me I have to restart for the changes to take place, so I do this;
-Then after completing its restart a message says that "The System Configuration Utility is in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts up."
-it then opens the MSconfig dialogue box again.
If I just close the utility or click ok, sure enough it keeps on opening every time I startup. Or else, what it's trying to convince me to do is to start up in Normal Mode. But I won't do this because then all the Startup Items I'd disabled become enabled again and the whole lengthy task was a waist of time!
View 1 Replies
View Related
Sep 3, 2005
The run link is missing from my startup menu...can anyone help me find it? I know this sounds dumb, but I really need to restore it to my startup so I
can take care of some other problems I'm having.
View 2 Replies
View Related
Dec 25, 2005
How do you remove the "Common Startup" items from the startup list in msconfig for Windows XP? I did locate and remove the "Run" items that are located in HKLMSoftwareMicrosoftWindowsCurrent VersionRun.
View 6 Replies
View Related
Jun 21, 2006
Win XP Home edition. I'm in the Speed Up Windows Startup class. I currently have a very long list of startup programs running. Is it safe for me to disable all except security programs (Symantec Norton,AdAware,Spyguard)?Charles
View 6 Replies
View Related
Feb 10, 2010
I think I might need to do this.It's now impossible to click or d/click on a programme or even an email and have it open I have to click 6-10 times before the little hourglass appears.I think I need to change my startup : what do you think? Msconfig shows my startup options to be -Normal Diagnostic Selective
Ought to to choose diag?Or Selective?because I can't decide which programmes I ought to remove and which to leave in, but I'm sure I have too many.
View 14 Replies
View Related
Apr 27, 2006
My sister's computer is running very slowly, particularly at startup (which seems to take forever). I've got Panda antivirus software running and do reasonably regular spyware scans with AdAware, but am not sure if the problem is just that the computer is old with too little memory / overheating because it's on almost all the time / something else I haven't thought of. To help me determine what's going on, could someone much smarter than myself take a look at this HJT log and see if you see anything of concern?
View 14 Replies
View Related
Jan 8, 2005
The problem is it takes an incredibly long time to startup because of these, once we close them it gets back to running fast, but until then we have to wait for them to open. I think it's causing the problem because we didn't have this problem until we installed this.How do I make it stop starting up on Windows XP? I sped up my startup on my computer by stopping useless things from running.
View 4 Replies
View Related
Dec 4, 2006
I just installed the East Asian language package from Control Panel > Language Options. However, I can't get my language bar to appear anywhere. I clicked on Details and Language Bar preferences, and I have "Show Language Bar on Desktop" checked.
View 9 Replies
View Related
Sep 11, 2007
I put in a Cd and it doesn't load, so I go to my computer and there are no drives. Ok...So then I go too System>Device Manager>And it says this for both my drives "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39).Click Troubleshoot to start the troubleshooter for this device.This has happened before, and i had to re-install my whole os. There's just got to be a way to fix this other than re-installing everything.
View 14 Replies
View Related
Dec 21, 2008
I've been thinking of installing Windows XP Pro on my laptop (it came with Windows Vista Home Premium) and I have an older computer that doesn't get any use anymore that has Windows XP Pro (came with the computer). So can I use my Windows Xp Pro disk from my old computer to install it on my laptop, or will it only work on the old computer?
View 1 Replies
View Related
Feb 7, 2006
Weirdly the directory doesn't have name. Is there any other way to delete the empty directory w/o explorer?
View 18 Replies
View Related
Jun 3, 2005
inherited a comp (sans cables). finally get it powered up and is asking for a password. the genius that left it behind doesn't know the password.am i up the proverbial creek?
View 14 Replies
View Related
Sep 1, 2007
When I run chkdsk, read only, it tells me that it found problems in the master file table and in the files and to run chkdsk /f. I do so and am told that the corrections will be made upon reboot.
Well, I reboot, and it goes through the three tasks (never telling me that corrections have, in fact, been made) then it reboots into Windows XP Pro. When I run chkdsk again, I get the same prompt, saying that files need to be fixed (see attached screenshot of command prompt's chkdsk).
View 2 Replies
View Related
Dec 11, 2004
Well I seem to be getting the problem where the auto run for DVDs or CDs doesn't come up. I know the cds have an auto run so don't try suggesting that the disks don't have it. I have no idea where or how to fix this problem.The drive its self has no problem reading the disk or running the disk what so ever, it just won�t auto run, which means I have to waste time going into my computer and clicking on the drive. So I�m wondering if there�s a setting somewhere that has disabled the auto run feature. I'm using windows XP if that helps at all.So if anyone here can help me, that would be great and I�m sorry if this is in the wrong section or whatever.
View 2 Replies
View Related
Dec 16, 2004
After trying to install Windows media v9 I am now getting an error message in microsoft word when I try to do a page preview the error message comes up Prop res .dll I have been surfing the net to find a resolution for a couple of hours now with no success until i stumbled on your site which apperas to be very helpful I operating system is windows 2000
View 2 Replies
View Related
Jul 13, 2010
I had Windows 7 installed on my laptop Dell Vostro 860, 2GB RAM, that after 2 months crashed. It gave me a black screen with"bootmgr is compressed press ctrl+alt+del to restart" that could not be fixed fast because I had lent my Win7 to someone who is far from me at the moment.I had the brilliant ideea to install Windows XP (since I had the CD).Everything went well up until the point when, during the installation it told me that it couldn't copy a file from the CD and the option to skip or try again. I skipped it since "try again" didn't do anything. I thought it couldn't do much harm. I got to the blue screen with the green bullets, progress bar and 39 minutes left when I got this error that said that windows can't continue and restarts the comp.
View 5 Replies
View Related
Apr 15, 2007
I am having a big issue with my windows xp. Some of the programs are fine, but the vast majority, when i try to open them, come up with an error message telling me it has encountered a problem and needs to close. I have tried to download certain anti virus programs but even they will not open! Very strange. Does anyone know what is going on?
View 14 Replies
View Related
Feb 26, 2008
- Taskbar has reverted back to the 98 style
- When I go to Start >> Search nothing happens
- Doesn't recognize the printer that's been installed for over a year
- Won't let me install another one
- System restore gives the error "System restore is not able to protect your computer. Please restart your computer, and then run System Restore again." and restarting does nothing.
View 8 Replies
View Related
Sep 3, 2010
i have a laptop and i know the keys to take a screenshot but it doesn't work .there is: fn+insert,prnt scrn sysRq but it does't work.
View 4 Replies
View Related
Dec 4, 2006
My win XP pro doesn't recognize my USB 400GB WD external HD.The PC detected it the first time however on subsequent connection, it only detect it as mass storage device. Window explorer doesn't show it as external device.I uninstall the USB mass storage driver from device manager several times but window doesn't display the HD in window explorer.
View 3 Replies
View Related
May 24, 2008
whenever i right click anywhere the menu that is supposed to come up doesn't. All you can see is like the shadow of the menu and you can only see things when you scroll over them. like i said above, i read about this on a previous board and tried the solution that was recommended, but it didn't work for me.
View 1 Replies
View Related
Mar 14, 2009
Sp3, latest updates.IE wont display any web pages at all it just hangs on the "connecting" screen. Rebooted to no avail. Upon reboot dialog boxes came up stating that various html items could not load in weatherbug. Google chrome works (sort of). internet options in control panel will not display at all. used IE yesterday was last on NASA web site and it worked fine. Tried to check email later in day and ran into this problem.
View 6 Replies
View Related
Nov 10, 2006
When I press the backtick key (top left) it doesn't do anything, until I press it again, when it produces two, "``", but I can never get just one. I've got all regional settings set at "English (United Kingdom). The device is listed as standard 102/103 or microsoft natural.
View 6 Replies
View Related
Nov 5, 2007
I have an old Compaq Presario 5360 with Sis 7001 PCI to USB controller. This machine was working GOOD, I could work with my USB web cam, USB drive, USB digicam and others MP3 players.I have reinstalled my WinXP with Service Pack 2.0 and now I CAN'T use any USB device, when I connect my USB drive this device is not powered, XP doesn't notify me for anything. simply this PC looks not to have any USB controller.I have an DELL Notebook, I can use my USB devices on it.I just reinstalled the OS in the same way how I did it before. I think is something about drivers, the control panel (System devices) tells me everything is good and my USB controllers are working correctly.
View 12 Replies
View Related
May 15, 2006
Have win xp. On my pc I am trying to play some music that I downloaded. I get the error message "THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. CREATE AN ASSOCIATION IN THE " FOLDER OPTION" CONTROL PANEL did go to the CONTROL PANEL and to the FOLDER OPTION, but I have no idea on what to do at this point.
View 6 Replies
View Related
