I have a Western Digital 200GB second hard drive with two partitions on it and I wanted to make it a single drive. (both partitions were empty and had been formatted). Using "System Explorer" I deleted the partition but the drive capacity still reads 127 Gigabytes -- which was the size of the larger of the two partitions. In the "disk management" tab of System Explorer the graphic display shows one drive where there was two (and a longer "bar") but I can't seem to get the computer to recognize the new size. I've checked it, defragmented it, and begged with it but so far nothing works. I also downloaded and tried a program called "HDD Capacity Restore" but it says the "device has to be single on a channel", which it is not.
how do i get it back? my total disk space in c is 37.28 gb. i had 80% free space in c before i did a clean reinstall as my hubby messed up something. im now down to 69% free space. what happened to it? the computer is working fine and i know windows xp home sp2 uses a lot of space but this is a puzzle to me. ive cleaned the disk and defragged but it didnt give me back much free space. i thought a clean reinstall is supposed to wipe everything out and put you back to brand new.
recentley i uninstalled my nero 7 software , the next time i turned the pc on my desktop icons have all changed to the type windows dont recognise, it asks me if i wish to select the programe to run it or try to direct me to the web , in the majority of my programe files i have the same format, i did have avg anit virus , ad aware profesional that reminds me when i first noticed the problem ad aware must have flashed up nearly thirty registry warnings that i never recognised , the only part of the c drive that works is the windows photo viewer, i have tried a system restore and have tried a running an xp disc over the top to no avail, i would really like to save this drive if possible , have run ad aware over it nothing found, i downloaded a hijack but windows wont run it , i have installed windows onto the other hard drive to get me going and hopefully give me chance to save the drive, pc is amd sempron 3000+ 512 ram two hard drives both reported good on a test ,
disk management error. unable to connect to Logical Disk Manager Service. At this point I've tried enough methods and internet - suggested fixes. Disk Management tool does not work :error "SERVER EXECUTION FAILED"
I'm a new member to this site. Found some posts pretty interesting and hence thought that this would be the place where I may get the solution to my problem. I have a SONY DVD RW AV-G170A installed on my Dual Processor Pentium PC. There are some Movie DVD's which I can play and view movies perfectly. The drive recognizes the media and plays the movies But there are some DVD's which when inserted in the drive are not recognised by Windows AT ALL - under any circumstances. It says "Windows cannot read from the this disk. The disk might be corrupted, or it could be using a format that is not compatible with Windows" THE DVD ROM IS WORKING PERFECTLY OK WITH OTHER SOME MOVIE DVD'S AND SOME DVD'S GIVING THE ABOVE MENTIONED PROBLEM.
Strange problem with my computer.I setup my computer to access my ISP by going to My Computer>Control panel>Network & dialup>Make new connection>etc. Put in all the data (telephone number and password). Tried it and it rejects (error 691 incorrect user name or password).Problem is that both user name and password are correct. I am able (using another isp account) to access Webmail directly at the isp using exactly the same password and user name.Problem appears to be specific to my computer.I am able to access the account using my laptop (using exactly the same password and User name and yes I have got the caps-lock off).
I recently burnt data onto a dvd disk, on a laptop version of my computer and once back on my pc, i cannot open the data because the disk is not regonised as being in the PC.
I am using Win XP and recently fitted a second hard drive. This was a fairly old Seagate out of an old Win95 computer (that died). The objective of the exercise was to be able to access old important data files. The primary hard drive is fitted as a Master and the secondary as a Slave. BIOS Setup recognizes the slave hard drive (cylinders, heads, size etc) but Windows does not!
My operating system is Windows XP Professional Service Pack 2 (build 2600).My monitor is HP 1502 (15 inches) and my video card GForce Mx4000 ver M 128M DDR Ram.My system does not recognise my video card and monitor although when Windows starts I see the video card. My screen resolution cannot go beyond 800 x 600.I have gone to Control Panel, display, settings, advanced, adapter and it shows:adaptor type properties, vga save,non-plug and play drivers,manufacturer unknown, location unknown,Driver Start up system.
We have built a computer for one of the disabled members of our Senior Group and installed Window XP on a 6 GB Hard Drive, however the computer only recognizes this as a 2 GB Drive.Can anyone please advise me as to how I can rectify this?
I've recently just bought xp prof ed for my laptop which runs me but the problem is it won't recognise my pc card (nic) that i bought recently. Why is this as i've installed the drivers i got with it. Is it because the copy didn't come with the laptop so it doesn't even know i have a pcmcia slot? If so how can i get round it? I've looked on sony vaio site for related xp drivers but as far as i can see there are none for pcmcia slot
I am trying to install some software but I keep getting the message that windows does not recognise a filename extension msi. I have also had the same message with scf and url extensions. Is there an easy solution? My OS is XP.
Just one very quick and propably simple question. somehow i managed to change a setting somewhere that has made all the files on my computer have the file type e.g. .jpg or .bmp at the end of every file name, how can i change this so it goes back to normall.for example i have; picture.jpg istead of just picture as the file name
I am thinking of buying an "upgrade kit", basically a much better mobo and processor, lots more ram, better sound and video card. It has No hard drive or DVD drives installed, those will come directly from my computer. I have XP installed. my question is, will it: Work great, since XP will detect the new hardware and everything is plug and play now Freeze up and refuse to boot since it doesn't recognise all the major changes
When I insert a cd into the disk drive I can hear it spinning and grinding but it never plays the disk & If I insert a blank disk to copy music, I get an error reading 'insert blank disk'.
We had a power outage and now when you turn on the PC it gets as far as the XP screen, then quits and starts again. This will happen forever until you turn off the power button again. I put in the restore CD but when it says hit 1 or 2, regardless which I hit it gives me and A: prompt and says Bad Command.P.S. It's an emachines 2385, 512K, Celeron 2 Gig processor
Old HDD really fricked up. Bought new HDD from NEWEGG & I cannot install XP on new hdd. XP cd loads and when it gets to partition screen, all four lines say "Unknown disk"-"There is no disk in the drive". BIOS recognizes the new hdd but XP cd does not. System: Dell XPS Gen 5 3.0, 4GB RAM, 250GB BARRACUDA 7200RPM HDD (ALL COMPATIBLE)
i have got the same problem....but when i insert a windows xp cd it is unable to detect it so the problem continues to be there itself...and more over i am using gigabyte mother board.and if i insert that cd.the monitor displays"FD 1.44MB System type(13)"gigabyte bootCD loader. press any key to boot from CD-ROM" when i press a key...it shows.."hard drive not installed properly press any key to restart"
If I partition my hard drive and want to append a partion to the windows xp partition can this be done.Also If I am having problemsdefraging a partition (it say's something about a retore file on it) but this partition does not have an operation system. I just use it to keep web sites I develop on it. How can I defrag it.
If you have low disk space in your drives, then you may get annoying pop-up messages from Windows that you are low on disk space. This can get extremely annoying at times, to turn off low disk space notification follow these steps:Start regedit. (If you are unfamiliar with regedit, please refer to this FAQ)2. Navigate to:HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer3. Create a new DWORD value and name it NoLowDiskSpaceChecks4. Right-click on this newly created value and click on Modify5.
When I go to disk management and right click on the c drive,I do not get the option to add a partition.I disconnected from the wireless network same negative result. Started in safe mode and signed on as administrator and still could not create another partition.
When I try to save something to disk it comes up with 'The parameter is incorrect', then when I close that one another pops up saying 'You do not have access to folder 'D:' see your administrator for access to this folder'Firstly D: is the removable disk drive and not a folder, secondly as I am the only one who has an 'account/user' then thought I was the administrator!
windows was unable to complete the disk check from My Computer.What cause this and how can I fix it? Apparently, this is the reason I am unable to perform a defrag.I ran a Chkdsk.exe and got the following msg: The type of the file system is NTFS. Cannot lock current drive.Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? y
I'm trying to boot to my trusty 98 bootup disk and it says it can't read the c:....my only guess is that it's an ntfs partition.how can I format this thing?
I know it was here at my last login, but Disk Cleanup is no longer listed in Programs>>Accessories>>System Tools, and the shortcut that I had placed on my Desktop is gone as well. This is the second PC on my in-home network, running XP Home edition, that this has happened to within the last 9 months - I have Norton Internet Security (all current and up to date) on all three boxes - anybody know what 's going on?
The hard drive was replaced with a 20 gb and now when I try to load the factory recover program it keeps coming back with an error message- failed to find attribs.dat in any list file on cd1, proceed anyway? only when you do proceed , it does not work. This harddrive had been used with xp previously.
Okay, i have posted thios at heaps of forums and they wont give me any useful info. So now its your turn :P I have windows xp cd. But it will not boot up. The bios is correct, and the cd is in there etc. It says press any key to boot, and i do.It detects some stuff then restarts and loads into my desktop Doesnt do anything. I have tried another version of windows xp pro. Same thing.I want to reformat, i need to reformat. This dialer is costing me money.
I was wondering if anyone can help with reformatting my hard drive. I am looking to reformat and install a clean xp. I have already transfered my files to an external drive. I was wondering if there is a;website if anyone has instructions how to re-format and clean install whats the difference when doing it from windows xp cd or a boot from windows 98?
