Disable BIOS Memory Options Such As Caching Or Shadowing
Jan 12, 2006
I keep getting a message that reads"A problem has been detected and windows has shut down to prevevt damage to your computer. FLTMGR_FILE_SYSTEM." it then says if i have added any hardware or software to try removing them. i did fit a tv/video pci card and this problem only started after i fitted it. i have removed the card and uninstalled the software via programs.but this hasnt solved it. the message i get also says to "disable BIOS memory options such as caching or shadowing" but i dont know what this means.
View 9 Replies
ADVERTISEMENT
Mar 14, 2006
How to disable Bios Shadowing and caching am using an HP Pavilion a1112n.
View 6 Replies
View Related
Sep 16, 2007
I have this problem and i really don't know what to do....it always happens except when i am playing some games in full screen...A Problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, follow these steps. Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to restart your computer, press F8 to select advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000008E (0xC0000005, 0x806FF94F, 0xB59E33C8, 0x00000000)
Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance.
View 9 Replies
View Related
Dec 13, 2007
Have a Dell Dimension 2350 at home with XP as the OS. Rarely use the PC because it is on NetZero's free dial-up. Has current CA Internet Security Suite too.
Getting the blue screen occasionally when I start NetZero's free dial-up program. The blue screen will appear right as the PC is trying to open up a Internet Explorer window, after the dial-up connection has been made successfully. The blue screen states to disable BIOS, but I don't have a clue how to do that
View 5 Replies
View Related
Aug 28, 2009
i have currently windows vista home premium sp1 running here... i wanted to install xp as my printer is not supported by vista and some more reasons intially the xp cd was not at all loaded, right after "the setup is inspecting your hardware configuration" it went blank...
then i followed this link, http://forums.techguy.org/windows-vi...ter-vista.html
it asked to disable sata in bios. after doing so, the xp got loaded but after loading when i entered to install xp, got the message " no harddisk detected"... this is because my hard disk is sata and not ide
View 8 Replies
View Related
Mar 7, 2010
Windows Folder Options Contents..downloads all sorts of images from Internet. I have checked the box Disable Cached Thumbnails in Control Panel Folders Options but now how do you remove all the images?
View 1 Replies
View Related
Mar 24, 2010
How do you turn off or disable the shared memory on windows XP
View 6 Replies
View Related
May 11, 2006
Everytime I perfom a Spyware Scan on my daughters computer it reboots automaticly, with a short blue screen flashing up. And when I run a microsoft update scan the computer reboots in the same manner during that scan. Everytime the HD is getting scaned it reboots in the middle of it, with a short flash of a blue screen that talks about physical memory dump. Can somebody help me there. By the way I reformated the HD already and reloadet everything new on that HD, because it had the same problem before. Could it be the BIOS or a setting.
View 7 Replies
View Related
Nov 25, 2008
I have Windows XP OS installed on my HP Pavilion 753n Desktop. I currently have 512MB SDRAM loaded, and want to upgrade with another 512MB. Is it necessary to update my BIOS settings (current BIOS on computer is dated 11 September 2002) prior to upgrading the memory?
View 7 Replies
View Related
Jul 13, 2005
I need the ability to save passwords while connecting to internet sites that require user credentials. The windows pop up has a check box to enable this but does not save the password. How can I make this work?
View 6 Replies
View Related
Sep 2, 2005
I am looking for a remote admin program to shadow all of my clients. Any
suggestions of a good one? I am running 2000 server. Most of clients are
XP boxes.I am currently using RDP. The only problem with that is it kicks the client
View 7 Replies
View Related
Feb 23, 2009
I have a message when starting my computer with os = Windows XP A problem has been detected and windows has been shut down to prevent damage to your computer A recent hardware or software change might have caused this Check to make sure any new hardware or software is properly installed. Check with software manufacturers any windows update I need If problem continues, disable or remove any new hardware or fortware, Disable Bios memory options such as caching or shadowing If you need to use safe mode to remove or disable pomponents, restart your comp Press F-8 and select advanced start-up options then select safe-mode Memory options IOS caching or shadowing
View 3 Replies
View Related
Aug 18, 2009
I have a memory problem, I have 248 MB of physical memory and only 88MB free. That is better than it was last night -- last night I had only 33MB free. My virtual memory is 606 MB with 244MB free.I cannot access certain things all of a sudden -- for instance, when I click in the system tools to do a disk defrag it never comes up. When I click on the Set Program Access and Defaults it never comes up. In control panel when I click on any of the icons in Administrative Tools -- none of them open.when the computer boots up it has the screen where it is asking for a password
View 11 Replies
View Related
Apr 25, 2007
When I boot my computer Windows freezes at the "Windows is starting..." screen but I can still move the mouse. This just began today. It does this same thing when I boot in the last good config and safe mode. So basically, Windows won't get past this screen no matter what mode I use.Also, I can't reinstall XP because I get a technical error blue screen that says I may not have adequate disk space, a driver may need to be disabled, or I may need to change the video adapter whenever I try to boot from the install CD. The message also says "pci.sys."
View 2 Replies
View Related
Apr 18, 2008
My pc won't boot windows. When I turn it on it gives the following message:"X300 SE 128MB BIOS P/N 113-A33406-100"Not exactly sure what is going on. I think it is either memory related or bios related, but I could be wrong.
View 10 Replies
View Related
Aug 14, 2008
once the on button was pushed, it came up with the BIOS screen asking for the password.I removed the CMOS battery, which allowed me to change the Password so I can get onto BIOS now. However, when I boot now it just comes up with the BIOS screen.I set HD to boot first, aswell as setting the clock and date. I then ask it to save and quit, after which it shut's down, and reboots, only, BIOS keeps coming up. And I need to get this sorted asap
View 14 Replies
View Related
Oct 21, 2009
I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
View 5 Replies
View Related
Apr 7, 2007
When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
View 1 Replies
View Related
Aug 10, 2006
Got a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).
View 5 Replies
View Related
Jul 12, 2005
I have a computer that I formatted the hard drive on. Then installed Windows XP Pro. When it boots up, it goes to a black screen and has Windows XP Pro and Windows XP listed with the Win XP Pro selected and boots to it in 15 seconds or so if nothing is selected. I have read somewhere about this before and have NO clue where I read it, but does anyone know how to get rid of the option (Win XP) that really doesn't even exist on the hard drive?
View 4 Replies
View Related
Dec 24, 2008
I have ended up with 4 different options for XP Pro when my computer starts. This is, basically, as a result of me re-installing Widows a couple of times to try and solve a very slow running system (more help needed there but I will start a new thread for that).How do I remove the 3 unwanted start options?
View 5 Replies
View Related
Sep 10, 2005
Im new to PCs and since my motherboard is three years old is it a good idea to upgrade? I contacted the maker of my motherboard and they say an upgrade is available and sent it to me for { DON'T CRACKUP} $49.00. I already read that you can really mess up your PC if you do one thing wrong when upgrading. Am I a fool for buying the upgrade? Please let me know as I can send the Floppy discs back.
View 2 Replies
View Related
Aug 18, 2008
I have ibm thinkpad R51 2887 nq2 series .My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.
View 1 Replies
View Related
Jan 23, 2007
I just flashed/upgraded my BIOS for my motherboard, and now XP doesn't even boot up.
After the BIOS load, I get a "MBR error 2" message and it just stays there.
My board is an Asus P5N32-SLI SE Deluxe. I used the Asus Update Utility to flash my BIOS.
View 12 Replies
View Related
Jan 15, 2009
I am trying to upgrade the RAM memory on my Gateway MX3230 notebook. It presently has 256 MB and I would like to upgrade to 1 GB. I have checked the Gateway website and and upgrade to 1 GB is acceptable. I purchased a memory module from Kingston which was listed as being compatible with my laptop. When I tried installing the module, the computer will not start, nothing but black screen. It's as thought there is no memory at all. I tried re-installing the module making sure it was inserted in as far as it will go, still no luck. There is no settings in bios that I can see that would prevent the acceptance of this module
View 3 Replies
View Related
Sep 18, 2005
The IEXPLORE.EXE still reside im my PC memory after I close the IE window.
With task mamanger, I can see there are many IEXPLORE.EXE running. But, I already close all of them.
I ran 3 ad-ware, spybot, MS antispyware. Removed all the spyware by those 3 spyware detector.
View 11 Replies
View Related
Feb 10, 2009
I am using Intel pentium 4 cpu 2.40GHz, 1.25 GB RAM. Iam using 80 GB samsung hard disk.
I installed Microsoft Windows XP Professional service pack 2 on a drive of 10 GB memory space with NTFS file system.
After the installation of Win XP, the drive properties shows 4.9 GB of used memory and only 4.45 GB of free memory, but when I try to find total memory occupied for all the files in that drive (using "select-all" and properties) the used memory is only 2.3 GB only.
Now I don't understand the huge difference of this memories calculations. Where that extra used memory gone, when the total memory occupied by all the files is much less.
View 2 Replies
View Related
Oct 19, 2007
why my Windowx XP sees only 1024 MB memory while I've increased the original memory of 512 MB by 2x 512 MB ?My motherboard has three DDR-slots. It had from the beginning a Kingston K 512MB PC2700 module in slot #1. This week I've added two Kingston K512 UDIMM 512MB PC2700 modules in the slots #2 and #3.All three modules has the type name KVR333X64C25/512, so I thought they would be compatible.
View 5 Replies
View Related
Dec 27, 2007
I am running Windows XP in a Compaq Presario, with CD reader and CD/DVD burner. My question: How do I get a DVD(with photos and sound) onto a Flash Memory stick or an SD card??
View 3 Replies
View Related
Jan 19, 2006
I have a white box Pentium 4 CPU with XP professional service pack 2 build 2600 installed. The motherboard is an intel D865GLC with 512 MB RAM installed in Dual channel mode with 1 256 MB stick of ram in slot zero of bank 1 and 1 256 MB stick of ram in slot zero of bank 2. This memory is dual channel compatible. I tried to add another 2 sticks of the same type ram but from a different manufacturer.
Here's the problem: I can use any 2 of the 4 sticks of ram together, both from the same manufacturer or 1 from 1 manufacturer and 1 from the other for a total of 512 MB. Everything works fine. I can place one stick in slot 0 of bank 1 and the other in slot 0 of bank 2 or I can place 1 in slot 1 bank 1 and 1 in slot 1 of bank 2 with no problems. I can even place a 3rd stick of the same type ram in any open slot and all's fine (except the machine complains that this is not an optimal memory setup). Memtest86 reports no errors with any of the above configurations
View 13 Replies
View Related
Jan 15, 2006
I recently reformatted and repartitioned hard drive and reinstalled XP. I messed something up because now when I boot comp, I'm given three different Windows XP options to boot even though I have only one instance of XP installed. What do I have to do to get rid of the two unwanted boot options?
View 4 Replies
View Related
