I was told a new hard drive would fix this error, but it didnt. My computer very rarely boots up successfully.After about 1 and 25 tries, it beeps and turns on successfully, continuing to all of the steps of the boot process.But the other 24 times, i turn it on, and it just sits there, without a beep, or the monitorpowering on all the way to a screen. All that happens is the "read" light on my cd rom blinks.
View 6 RepliesYou know how when you insert a CD, the cd icon blinks next to the cursor? Well on my computer,it blinks ALL THE TIME.Someone tell me how to turn this thing off?
View 4 Replies View RelatedWhen I first turn on my computer the monitor remains blank and the computer just flashes the CD & DVD lights and I think the HD light is also on but that's it. I tried to press the reset button but nothing happens. If I turn off my power strip and then turn it back on and turn on the computer it boots ok. What is going bad on my machine, the HD, power supply, or could it be the mother board?
View 1 Replies View RelatedHer computer went into hibernation/sleepmode/standby , and we don't know how to get it back out of whichever one it's using. Nothing boots up on the computer when she reboots and the monitor light doesn't come on.
View 7 Replies View RelatedI've had a problem with my computer; in the past, almost every time I turned off the computer and rebooted, I would have to enter safe mode and then switch to regular mode, so I generally kept the computer on. After a longer than normal power outage, my computer doesn't reboot anymore. When I push the power button, it begins to boot and then shuts down. The computer in question has an amd 1,1 ghz athlon, 1 agp video card, 1 pci dual monitor video card (I run 3 monitors), a dvd drive, a cd-rw drive, a 3.5" floppy drive, a soundblaster card, 56k modem, 40 gig hd and an ethernet card for dsl.I'm running xp home edition with sp2. I tried unplugging various cards and drives, but it still will not boot.
View 2 Replies View RelatedASUS laptop P3, 386MB RAM; XP2 - after scrubbing the drive of spyware and a virus - there was still one remaining - worm/spybot which included these 3 files: explore.exe, svshost.exe and windowsupdate.exe all of which are bogus files. I deleted these manually but did not find any registry entries (run once) that typically is associated with one of these files. Everything looked great until I rebooted because then XP starts, right after the logo screen things go black and the machine reboots forcing you to go to safe mode. You can go to safe mode once then reboot and come up into standard mode ok. Next time you reboot the reboot thing happens and you are stuck in this loop.
View 4 Replies View RelatedMy PC is around 6 years old, maybe older, and for the last couple of months, mostly during the night (which to be honest scares the hell out of me), it will turn on randomly. Sometimes it's when I move the mouse, which I know had something to do with a setting in the BIOS, but sometimes it's for no reason at all. It just...boots. Sometimes straight after I turn it back off. I've had to unplug it at night.I always shut it down properly - no standby or hibernation.
View 3 Replies View RelatedOk so I just fixed a computer and reinstalled the Operating System. I booted it once an installed all the drivers again then restart it. Upon doing so it failed to boot the operating system. I rebooted it again and said start Windows in safe mode. This results in the Windows XP loading screen appearing but when it goes away the whole system restarts. The same thing happens no matter what I select on the "Windows did not start up last time" screen.
View 1 Replies View RelatedI have a brand new comp. w/XP MCE the boot times and shut down times are way too slow. Mine boots slower than the P4 3Ghz at my school. (30 seconds to a minute after I press power)My specs:E6600 WD 7200 320Gb 1 Gb DDR2 667 (will get another gig around April)ECS P965T-A.I know it should boot a whole lot faster so an explanation or a link to a site would be helpful. I know there are many factors so another site would be fine.
View 9 Replies View RelatedNew install of OS, all MS security & crit updates. Nothing extra. Few apps installed.
When I right click on file(s) in a folder the screen blinks, and I hear the sound of a USB PnP device being added to the system. Of course no evidence of a PnP being installed. No USB devices are attached. All USB ports have been tested and are good. And worst off all - This is intermintant.
PC hangs in any one of the following ways;screen blinks black for a second of so, then returns but is frozen (no mouse movement or anything)screen blinks black and returns but all garbled & corrupted and frozen screen blinks black and monitor says "no input" and promptly turns itself off this usually occurs between half an hour and an hour of turning the PC on.. but the duration is by no means fixed, and it will sometimes only last a few minutes. the same applies after a restart.
View 3 Replies View Relatedhi there, can anyone please help me find out why my pc keeps re-booting. there seems to be no one thing that makes it do it, as it can happen at any time and while doing anything. DRIVING ME NUTS! Dont know where to start looking to find out why. please can anyone suggest anything that i could do. thankyou. also tryed running a defrag and it is telling me that it is scheduled to do a Chkdsk /f and wont let me defrag. what does this mean??
View 6 Replies View RelatedWhen I reboot my computer it takes sometime to reboot now and sometime I get this blue screen A problem has been detected and windows have been shut down to prevent damage to your computer. If this is the first times youve seen this stop error screen appears again follow these steps. Check to be sure you have adequate disk space if a driver is denitrified in the stop message disable the driver or check with the manufacture for driver update try changing video adapters. Check with your hardware vender for any bios updates.
View 2 Replies View RelatedHusband upgraded my puter yesterday. New mother board graphics card (VGA Asus more/new ram and new processor and a CPU. Will only boot up in safemode or safemode with networking. As it boots up a screen pops up that "appears" to be telling me why, but it goes off so quick I can't read it. Is there a way to freeze that screen so it can be read? Surely there's some kind of "log in log" that tells you this somewhere in XP?? After booting up for the 1st time we had 2 question marks in the device mgr and we finally got it so there are none. But still it will only boot up in safe mode. We're thinking that boot up screen will tell us what the problem is.
View 2 Replies View Relatedfor some unknown reason my PC boots up into a new temp profile instead of the current admin profile that I have always been using. I can see all my old settings in my other profile but its a pain because It wont let me boot to my previous existing profile.
View 6 Replies View Relatedevery time I start my computer, system restore boots up. That is, the system restore page appears and thus I have to close it before I can do anything on my computer. So, my question is.. how can I get it to stop booting up as soon as I turn on my computer?
View 9 Replies View RelatedI've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
I got this inspiron 1100 off ebay it didn't come with a hard drive so I put the hard drive from my inspiron 9300 into it and when you turn it on the the power light is on and the hard drive light blinks once and stays off. The screen remains black and when i tried to hook it to a montior still nothing black screen. was wondering if i used the wrong kindof hard drive?or am I looking in the wrong direction.
View 1 Replies View RelatedWhat would cause me to have to change my boot sequence everytime to get my computer to boot into windows ? When it restarts after I change the boot sequence it goes right into windows xp. I recently had a new hard drive and more memory put in the computer. It will not boot into windows xp until I go into my setup and change the boot sequence everytime. Then it will boot into windows. The computer is about 6 years old and windows xp was an upgrade to 98. Once the computer is in windows it works just fine. Changing the bood sequence everytime is a bummer.
View 1 Replies View RelatedMy computer boots slowly, loads websites slowly and goes slowly from page to page.If Flrman (or any moderator of the sight) solves this, I will be happy to make a donation to keep this site going.Lastly, how do I get to personal profile to log specs into my sig? Can't find link.
View 14 Replies View RelatedA while back I tried to reload the entire WinXP and start from scratch due to some viruses and what not. Before I could complete the process, I decided to try to fix the problems one last time. It Worked. Now when I turn the computer on It automatically directs me to a blue windows setup screen. In order to start WinXP I must manually select windows in the three second time limit.How do I get my computer to automatically start windows at start up?
View 7 Replies View RelatedI'm trying to figure out what's wrong with my parents' PC. They have WinXP, 512MB RAM, and a 1.2 GHz cpu. They've had a problem wth spyware in the past and have had it cleaned up, but it still boots up extremely slow. Usually it's around ten minutes or so until you can finally do anything on it, and even then, applications seem to take a while to start up and run slow after they do. Is there something I can do to see what's the matter with it?
View 9 Replies View RelatedWhen the computer boots, the loading Progress Bar of Windows XP is displayed, but as soon as the computer goes into Windows XP, the screen turns black and stays black. wat is the cause of this problem and its solution?
View 1 Replies View RelatedI have a laptop that is booting extremely slow. When you logon to windows it literally takes about 20 minutes to get to the desktop and have the icons show up...but before that happens a Virtual Memory Warning pops up as well.
I have run virus scan, spyware scan
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies View RelatedWhen I turn on my PC it goes to boot up then automatically shuts itself off.
View 2 Replies View RelatedI turn on my pc and it boots as normal and goes to a screen where I have my users shown. Once I click on any of them it starts to sign on but straightaway changes to logging off and returns to the 3 profile screen.
I can get into my desktop if I go through safe mode though
Everytime that i have such kind of problems above when i try to boot my PC it doesn't boot (Means there's nothing comes up on the Monitor with flashing green light, HDD just run for a while then stop, and there's some wierd noise comes out of my Speakers as well it's like chinese or sth, wierd huh?
With that happens if i just leave my PC for a couple of days and try to boot it again, it boots up but somehow it cannot go into the OS and when i try the Safe Mode, it just show me alot of lines and continous beeping.
I need my PC secured but now it boots up without prompting me for a password.I running XP media center addition 2005.I have not knowingly made any changes to drop my password prompt and I've jump through too many hoops to reset it than should be listed here.
View 6 Replies View Relatedinstalled an NIC card into my system earlier tonight as i want to be connected via ethernet, so put the card in the pci slot, booted up the pc. beeps once
no display what so ever and system hangs. tried another monitor, same problem.cleaned some dust from my motherboard and ram while putting the card in.have i messed up the RAM or mainboard in the process??
I'm having this problem with windows xp pro fresh install onto sataHD. Pressed F6 and installed sata drivers for the mobo etc. Now i hastento add that i have tried this 3 times now, set up runs smoothly windowsinstalls however when i have finished windows will only boot up withthe CD in the CDROM. Been into Bios and changed boot sequence but stillif no CD it just gets to boot from cd in the boot up screen and stops,put the disk in and windows boots straight up and away we go.
View 1 Replies View Related