Cmd Prompt
Jul 17, 2008
I'm trying to figure out how I can search for folders using command prompt. But it's a little more complicated then just that. I have a huge list of folders in excel and I need to search in just those folders to see if there are folders in them. is there a command I can use to search for folders in each location? I was thinking I could use excel, with the list of folders i want to search through, then write the command to each folder and paste everything into notepad and save as a bat file. Then have the results go into a text file. This sounds complicated, but any help would be much appriciated
View 4 Replies
ADVERTISEMENT
Nov 11, 2008
I think this happened when I ran AdAware. I cannot connect to my wireless internet had figured out that my IP ADDRESS is all zeros. I know my ip, I just don't know how to tell my computer what it is! If you cannot tell, I am barely literate in computers.
View 2 Replies
View Related
Jun 4, 2006
For whatever reason, I cannot type when I ope the CMD prompt (Start/run/cmd) However, when I type in command it works. I believe this has something to do woth the fact that my itunes & quicktime have just stopped working
View 5 Replies
View Related
Dec 15, 2006
I want to uninstall an application ActivCard from a command prompt with the same results that would be had using the "Add/Remove Programs" GUI in XP. How do I do that
View 14 Replies
View Related
Jan 18, 2007
I have Windows XP on my computer, and when I try to ping something through the command prompt (command.com), this shows up:Running tracert also has the same problem.If I try running ping or tracert through cmd.exe, it stalls and doesn't do anything. I have to close the program because it doesn't respond.I can use ipconfig in both cmd.exe and command.com. Do I have a virus on my computer, or is there a way to repair the command prompt?
View 14 Replies
View Related
Jun 27, 2010
I have a Dell Dimension 3100 Dell systemDV051 BIOS versionA03(10/08/05)it will not let me get any further than the blue screen,I click on safe mode or any other and it just returns me to the blue screen at the bottom of the screen it has the codes 0x000000ED (0x8716C7B8,0xc0000006,0x00000000,0x00000000) I do have the original xp reinstallation CD but I don`t know how to get a C prompt to use the disk.I do hope you can help I have limited knowledge.
View 14 Replies
View Related
Jul 12, 2005
After setting up a password for the pc, I changed my mind and want the pc to boot up without showing the password prompt. All I've been able to find is how to remove the password but not how to prevent the prompt from popping up.
View 1 Replies
View Related
Jun 22, 2006
When changing the title to the cmd prompt and after closing and then reopening it reverts back to the old title ? My path in the Cmd Prompt window > C:> title
View 4 Replies
View Related
Dec 17, 2005
cmd prompt closing instantly when i go to run under the start menu. Anything that involves the command prompt closes instantly also. I'm not sure if i've changed anything lately
View 2 Replies
View Related
Oct 15, 2010
in my pc commands are not working in cmd prompt (some commands are working properly) i got the error like is not recognized as an internal or external command, operable program or batch file
View 8 Replies
View Related
Jun 20, 2008
I've got a bit of a problem. My command prompt (run cmd) has decided that it doesn't know what "help" is. Heres the output and my path is not recognized as an internal or external command,operable program or batch file.What is wrong This can't be normal
View 10 Replies
View Related
Jan 15, 2006
Whenever I use CMD in Windows XP, it automatically goes to C:/Windows when I need to do something specifically in C:/ When I go "cd c:/", it'll just take me to C:/Windows. Is there a way so I can access C:/
View 5 Replies
View Related
Jul 4, 2005
Is there a way to prompt a user to key-in his or her username and password when open a share folder within a workgroup?
View 1 Replies
View Related
May 22, 2005
Still getting the dos prompt shutdown command box after scanning and removing malware, spyware, trojans and everything else you can think of. Here is what it looks like. C:/windows/system32/cmd.exe
View 1 Replies
View Related
Jul 7, 2005
I have Windows XP Home and for some reason, all of a sudden I am unable to run any kind of commands in the Command prompt under Start - Programs - Accessories. I used to be able to run things like system file checker and ipconfig but for some reason I cannot now. Could DOS be corrupted or am I just accessing things wrongly. Last time I tried to run IPCONFIG I received a message that said "IPCONFIG is not recognized as an internal or external command operable program"....Also when I open up the command prompt it says C:Documents and Settings Username.
View 4 Replies
View Related
Nov 3, 2007
I need to open the stupid command promt thingy to use certain commands for this retarded isp to get my broadband to work,.however my problem is that when i goto run and type in "cscript.exe" it opens and closes straight away.
View 1 Replies
View Related
Mar 23, 2006
Specifically, boot XP with a DOS diskette then run a .com program. It's been too long. Seems like it's just:
A: program.com {enter
View 2 Replies
View Related
May 4, 2005
For some reason, I can only get the old Windows 2000 logon prompt, even though I have "Use The Welcome Screen" and "Use Fast User Switching" enabled in my User Account settings. I want to use the Windows XP style logon. Unfortunately, with the classic logon prompt, I am unable to switch users without logging out of my current account.
View 3 Replies
View Related
Jan 14, 2005
A friend of mine set up my computer for me, and is no longer available to answer this question, so Here it is: When starting up Windows I get past the black-windows XP screen with windows flag, then on the next screen, when the screen background turns blue, I get a "Enter password" dialog box. I simply hit the Enter with no Password, and the PC continues to load up Windows with no further prompt. The PC is running Windows XP Professional Home Edition, is in a single home use enviornment, and it serves only my wife & I. I see no need to limit file accessibility, therefore no need for any password. Did my friend enter me as an Administrator during the system build? If so, do I have to delete the Administrator and Guest account? I want to 'get-rid' of this password screen - it is more annoying than anything else.
View 7 Replies
View Related
Jan 2, 2005
I am made a an html page wich using java script make a (Local)url (C:xxx.html) and redirect to it.My explorer always shows me a prompt that an active content is running
I can open the page without a prompt when running the file frim a remote location. But I want to run it from the clients hard disk(they don't have network). How can I remove that prompt from appearing.
View 5 Replies
View Related
Feb 4, 2006
I have win2000 which i installed as upgrade over win98, now i want to get rid of it all and just do fresh install of 2000, could someone please give me step by step instructions to do full install and how to get to the msdos prompt. I havent done a fresh reinstall for years so pretty rusty on it all.
View 4 Replies
View Related
Nov 25, 2006
My Prompt does not recognize any command. But Exit.Windows XP Panda antivirus 2007
View 6 Replies
View Related
Jul 15, 2005
i edited some high and low filters from my reg trying to get xp home to find
my cd burner. now i have no mouse or keyboard fnction when i boot into safe
mode can you do a reg restore from a safe mode command prompt ?
View 11 Replies
View Related
Sep 1, 2008
I have windows XP Home installed on the computer. It will show the micropc page, go into the safe mode/normal mode/last good settings/boot with command prompt/ boot with networking screen, and no matter what you choose, it just resets again and ends up at the same screen..
View 8 Replies
View Related
Nov 7, 2007
It always starts with (c:documents and settingsmark>) is this how it is supposed to start out.Every time I type a command it never works. I want to type this- tasklist /m /fi "IMAGENAME eq rundll32.exe" >C:undll32.txt because my pc would not let me shut down kept saying rundll32.exe was not responding. Earlier I clicked on windows card space because I had not seen it before to see what it was and it started the service,when I clicked on it again it said it was to busy to answer my request.I never heard of such! It uses rundll32.exe, I think.I finally hit "end now" and rebooted, now I got 2 rundll32.exe's.I found that command on Ramishes site under "whats the suspicious Rundll32.exe" http://windowsxp.mvps.org/rundll32.htm Anyway I thought cmd should start with "c:" and thats it?
View 6 Replies
View Related
May 27, 2007
Hey! I am having a big problem with my command Prompt. Everytime I try and open a program that uses it, the prompt appears on the screen but disappears in a split second. It's like a quick flash. Now, when I open the prompt by itself by going to it in "Start---All Programs---Accessories---Command Prompt, it works fine. But I can't do hardly anything from there.
Any advice?
View 7 Replies
View Related
Aug 15, 2007
I want to be able to reset the password promt pop-up. I clicked on don't remember anymore passwords and I don't know how to find this prompter to let it remember passwords.
View 1 Replies
View Related
Sep 13, 2008
I just completed a clean reinstall of xp. After installing Photoshop CS3 & iTunes my computer has been running severely slow! I know it's the "Bonjour Service" that is auto installed when installing both programs. I have stopped the program through "services" and have been instructed to remove a file via cmd prompt but when I try to do this I get a message stating C:program is not recognized as an internal or external command, operable program or batch file.
View 2 Replies
View Related
Apr 30, 2008
Does anyone know of a way to get the file/folder properties page from a cmd prompt as though you have just gone and right-clicked the file/folder in the gui, The reason I ask is because I may have a user logged in and need to look at the file/folder properties (specifically the ntfs permissions) and because they are logged in as a user account and have no access to the folder they cannot even see the security tab of the properties box. So I need a way from the command prompt to open the properties box of a file/folder (as I have done a runas to get an admin prompt inside their user gui session. Looking at security settings in a cmd program may also be of some interest if anyone knows that either
View 6 Replies
View Related
Jan 28, 2008
As stated one of our customers has some windows based software (Sage Line 100 and Telemagic to be precise) which is run from a shortcut on the desktop mapped to a network share with the exe located within. whenever you run either of these shortcuts or even if you navigate directly to the file you get the error "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item" the users in question have full local rights and full control over the files on the server inc the exe. As they are part of the USERs group which have full control. The Administrator has no problem in getting this file to run
View 5 Replies
View Related
Sep 13, 2005
I recently rebuilt my Windows XP Pro laptop with a clean install. I discovered today that upon trying to run some command line syntax, my laptop is not recognizing any normal commands (ie. ping, ipconfig, nslookup, I am receiving a message "'ipconfig' is not recognized as an internal or external command, operable program or batch file." I run cmd line often and need this to work, Is there something that didn't install properly or do I need to execute a file within my system32 directory to activate this area of my OS
View 8 Replies
View Related
