I have Windows XP on my computer, and when I try to ping something through the command prompt (command.com), this shows up:Running tracert also has the same problem.If I try running ping or tracert through cmd.exe, it stalls and doesn't do anything. I have to close the program because it doesn't respond.I can use ipconfig in both cmd.exe and command.com. Do I have a virus on my computer, or is there a way to repair the command prompt?
View 14 RepliesI would like to know if this can be done in win xp environment. say I have a folder, A, of pictures only and they all have file extensions jpg eg abc.jpg, xyz.jpg. say I have a second folder, B, which contains all the files of A(if you ignore extensions) and more(but all are pictures.) But all the files in B has extensions NEF instead of jpg eg abc.NEF, efg.NEF, xyz.NEF. My idea is to extract all the files from B that has the same the name as A(ignoring extensions) and either move or copy to a separate folder ie if A contains abc.jpg, xyz.jpg then abc.NEF and xyz.NEF will be extracted and moved/copied to a new folder. I'm not sure where to start. is there a program out there that can do this? or there's a special command to type at the command prompt?
View 3 Replies View RelatedPreviously I have been doing work that requires me to unplug my network connection and I need to check my IP address each time I plug it in again. I guess it's not set for static IP.Anyways to do this I usually go into Command Prompt and type 'ipconfig'Now however I just get "'ipconfig' is not recognized as an internal or external command, operable program or batch file".The directory is the same as its always been, I can change it but it doesn't seem to matter what it is.I've checked many other posts and is there something possibly wrong with my PATH variable? I used the command 'echo %PATH%' and it works, the list it gives is very garbled however.
View 13 Replies View RelatedI noticed a lot of services running under one of my svchost.exe processes when I ran the "tasklist /svc" command in the Command Prompt.Here's what I got: AudioSrv, BITS, Browser, CryptSvc, DHCP, dmserver, ERSvc, EventSystem, FastUserSwitchingCompatibilty, helpsvc, HidServ, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, srservice, TapiSrv, Themes, TrkWks, W32Time, winmgmt, wscsvc, wuaserv, WZCSVC I'm not at all sure if any of those are real threats
View 3 Replies View RelatedStill getting the dos prompt shutdown command box after scanning and removing malware, spyware, trojans and everything else you can think of. Here is what it looks like. C:/windows/system32/cmd.exe
View 1 Replies View RelatedI have Windows XP Home and for some reason, all of a sudden I am unable to run any kind of commands in the Command prompt under Start - Programs - Accessories. I used to be able to run things like system file checker and ipconfig but for some reason I cannot now. Could DOS be corrupted or am I just accessing things wrongly. Last time I tried to run IPCONFIG I received a message that said "IPCONFIG is not recognized as an internal or external command operable program"....Also when I open up the command prompt it says C:Documents and Settings Username.
View 4 Replies View RelatedI need to open the stupid command promt thingy to use certain commands for this retarded isp to get my broadband to work,.however my problem is that when i goto run and type in "cscript.exe" it opens and closes straight away.
View 1 Replies View RelatedMy Prompt does not recognize any command. But Exit.Windows XP Panda antivirus 2007
View 6 Replies View Relatedi edited some high and low filters from my reg trying to get xp home to find
my cd burner. now i have no mouse or keyboard fnction when i boot into safe
mode can you do a reg restore from a safe mode command prompt ?
I have windows XP Home installed on the computer. It will show the micropc page, go into the safe mode/normal mode/last good settings/boot with command prompt/ boot with networking screen, and no matter what you choose, it just resets again and ends up at the same screen..
View 8 Replies View RelatedIt always starts with (c:documents and settingsmark>) is this how it is supposed to start out.Every time I type a command it never works. I want to type this- tasklist /m /fi "IMAGENAME eq rundll32.exe" >C:undll32.txt because my pc would not let me shut down kept saying rundll32.exe was not responding. Earlier I clicked on windows card space because I had not seen it before to see what it was and it started the service,when I clicked on it again it said it was to busy to answer my request.I never heard of such! It uses rundll32.exe, I think.I finally hit "end now" and rebooted, now I got 2 rundll32.exe's.I found that command on Ramishes site under "whats the suspicious Rundll32.exe" http://windowsxp.mvps.org/rundll32.htm Anyway I thought cmd should start with "c:" and thats it?
View 6 Replies View RelatedHey! I am having a big problem with my command Prompt. Everytime I try and open a program that uses it, the prompt appears on the screen but disappears in a split second. It's like a quick flash. Now, when I open the prompt by itself by going to it in "Start---All Programs---Accessories---Command Prompt, it works fine. But I can't do hardly anything from there.
Any advice?
In Win XP Command Prompt is Hidden...Cannot Retrive Command Prompt. Right now the PC I am working is showing no run option From Start>Run Usually In WinXP you can right click on Start>Properties>Classic Start Menu>Display run option you can see, I compared two WinXP Machine Side beside One have Start>Properties>Classic Start Menu>Display run
Other one dont have that, My Question is if somehow it got Deleted/ Or got Hidden How to Retrieve it
I tried to get rid of Win XP Pro on partition 2, which it looks like I did. Now I have partition 1 and it has Windows Home Edition on it. I think maybe I have done something incorrectly. Shouldn't this drive c be one big drive now? I just see drive c, which doesn't really have that much room on it. Do I have to format the drive and start all over? I don't understand. I have instructions on how to edit boot.ini, but when I followed the instructions, the command prompt doesn't recognize bootcfg /?, saying there is no such file. If I have to format and start all over, I will.
View 8 Replies View RelatedI have Thai language working in most programs. How can I get it to display in the dos window?
View 5 Replies View Relatedwhen I give the command gmake.exe win32 where win32 is the target destination.It throws the following error: gmake target=WIN32 DIRECTORY=win32 portable copyrite headrlib argfile postlinkgmake[1]: Entering directory `C:/optv_sdk32_gnu_cd'perl utils/check_dir.pl portable/win32 gmake --no-print-directory -C portable WI
N32'gmake' is not recognized as an internal or external command,operable program or batch file.need to have read write permission for the win32 directory as rite now it shows as read only.
I want to run a chkdsk c: /f /r /x from a command prompt but NOT have it ask if I want to run it at next reboot. I just want it to run without a y/n input. Is there any such way to do this?
View 2 Replies View RelatedI have no idea how it happened, but every time I try to open a partition from the task bar or from My Computer, the "command prompt"opens.I have to "right click" and select open.Very annoying, and I can't figure out how to get rid of it. I'm running Win XP SP2.
View 3 Replies View RelatedAlthough I am not a computer wiz, I did manage to format the harddrive on my old computer by writing format C:, after restarting in MS-DOS while running Windows 98.
With Windows XP I don't find that option. I can get to the Command prompt C:, but it won't let me format the harddrive.Any assistance with this would be much appreciated, I am trying to re-format and re-partition.
Hey guys i have had quite the fatal loss of functionality with my XP Install, so i have thrown in my recovery cd and gotten to a command prompt, but when i try to run system restore no luck, i am using %systemroot%system32 estore strui.exe and hitting enter but a this command is not recognized error pops up.
View 1 Replies View RelatedIm not actually gonna do it, but I have a Windows 95 install CD Rom and I put it in my computer (XP operating system). It said something like "run with MS DOS" which I tried using the "command prompt" thingie and it did NOT work. How would I go about running MS DOS to get 95 to install [if i choose to]?
View 10 Replies View RelatedI have just gotten a second hand computer that has had it's hard drive cleaned out. Trying to load the OS, I first loaded win98se, and then XP.What I did not know was that 98SE loaded in a 2gb partition, without me partitioning the drive.Then loaded XP into the main partition. Now, there are various faults.I have tried to run fdisk, both in drive c: (the partition with 98x) and drive e: (the partition with XP)Neither will allow me to run fdisk to clear the hard drive and start again. I have tried all possible commands as per my old MS-DOS book. It states it cannot find fdisk either in command prompt or run.
View 7 Replies View RelatedI opened the command prompt and it was fine.I opened the command prompt and it opens *very briefly* and then
closes.I've tried to open it many ways-from the start menu, from the run command, from the actual program file.but it all does the samething.Opens for about 1 second and then closes again.
I cannot enter to command prompt at my computer running windows xp.Whenever I try to enter command prompt, my computer unexpectedly restart.
View 8 Replies View RelatedI have Windows XP Pro. I have 2 PCI slots, one containing 120 mb and the other containing 256 mb giving me a total of 394 mb of memory. I bought 3 different sticks of 256 mb (due to I thought ram was bad, but its not.). I looked in Bios and it shows 2 sticks of 256 ram giving a total of 512 mb, BUT I had to take the new ram out due to when I would turn pc on a black screen would come up and I would select "start windows normally" and all that did was just keep rebooting. I have tried doing a bios update but unable due to when I put in the command on the command prompt it came back saying bad command.
View 7 Replies View RelatedI think i may have just made a big mistake, whilst messing around with command promt and researching on websites i wanted a program to run when my comuter started, a website stated to add it to the autoexec.bat file as a 'call' program or in config.sys, so in cmd i entered edit autoexec.bat and a blank edit screen appeared, i did the same with config.sys and another blank screen appeared. It said beneath to open sysedit from start>run, i did and the autoexec.bat file was empty and so was the config.sys file, is this serious or am i jusy being
View 11 Replies View RelatedHeres what happened I wanted to change system wide folders Icons so I went into Folder Options>File Types>File Folders >>Advanced and attempted to changes the icons in doing so somthing went wrong and now when I double click on any folder (except hard-drives and My Documents) it will open up in the command prompt. I must right click and select OPEN for it to work.
View 14 Replies View RelatedI have a server at my home network, running windows XP Pro SP2, and it is configured with 2 users. One Administrator and one user. When I connect using remote desktop, I usually connect as the user (Not Administrator), but lately the command prompt has stopped working on this account. When I type cmd in the run-window, command prompt opens, and about 1/2 sec later, it's closed. If I connect as the Administrator, this problems doesn't exist.I have scanned for viruses, using both my installed Norton Internet Security package, and also using Symantec's online virus-scan. No virus found.
View 9 Replies View RelatedYou can change the colors on your command prompt! It's neat that you can change the color to match your mood and personal favorite! :) Here the following on how to do this!1. Click start> All Programs> Accessories> Command Prompt. 2. When it opens, click the icon on upper left corner where say "C:" beside "Command Prompt" there will be submenu comes down. 3. Click Default then click color tab then that it! You can change colors whatever you like to match your mood, and personal.
View 9 Replies View RelatedInstead of going through the registry to add a context menu option for opening cmd.exe at any folder, just download the "CMD Line Here" Windows XP PowerToy.
View 9 Replies View RelatedMy win xp installation on the hard disk 'A has gone bad, therefore, its not able to boot up. But I can access 'A' through my other hard disk 'B' which has a good copy of win xp. The problem is that my hard disk 'A' had a user acct. which was password protected, therefore, when I browse using hard disk 'B' windows, I cannot access the user folder in hard disk 'A' as it says access denied. Now how can I remove the password of the user in my hard disk 'A' so that I can access the user folder.
Remember that the win xp is corrupted on hard disk 'A', so it does not boot up. So I guess something has to be done through command prompt only, as I can goto the command prompt by booting using windows cd and then selecting the repair function, and then entering the admin password.