Check USB 2.0 - USB 1.1
Mar 12, 2005How can I tell whether my motherboard has USB 1 or USB 2.0?If the motherboard can only support USB 1.1, how can I have it to support USB 2.0? Do I need to update or install anything?
View 10 RepliesHow can I tell whether my motherboard has USB 1 or USB 2.0?If the motherboard can only support USB 1.1, how can I have it to support USB 2.0? Do I need to update or install anything?
View 10 RepliesI am running Windows XP Homedition. I have two drives inside, the regular C: drive and I have a Slave drive F: with all my photos and music and documents. The problem I'm having is that everytime I restart or reboot my system it say it needs to check F: drive for consistency. It haven't been doing that until now. Then once it goes through that the system comes up. I try to click on an icon like my internet or registry program, nothing comes up, its like a read only file or something. Its not executing the program. THEN all of a sudden I get a blue screen. It says this::"Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver updates. try changing video adapters. "Check with your hardware vendor for aany BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use SAFE mode to remove or disable components, restart your computer, press F8 to select Advance SStartup options, and then select Safe Mode."
View 1 Replies View RelatedCould anyone explain to me the difference between doing an error check at boot up and doing a scannow check.
when i run chdisk for errors in win 2000 by right clicking the hard drive icon and then clicking properties of c: harddrive, then tools tab, then click the check now button, and in the check disk options ticking "automatically fix file system errors" and clicking ok I get this message "The disk check could not be performed because exclusive access to the drive could not be obtained. Do you want to schedule the disk check to occur the next time you restart the computer."If i chose yes to that above it performs the diskcheck at reboot and when windows loads i go back to the checkdisk and i get the same problem again.
View 3 Replies View Relatedim running a dell dimension 4600 and just today there is no sound from my speakers. I tried re-installing my driver, checked to see if it's muted, checked BIOS. It was working yesterday...Can anyone tell me how to check my Sound Playback device and playback programs? I'm using Media Player and iTunes I tried other speakers and there is still no sound Also, forgot to mention that my speaker makes a static/fuzzy noise when i turn up.
View 14 Replies View RelatedWinExplorer -> right click C: -> go to properties -> go to tools click error check. Will get message that error check will start at the next start up. Problem. Error check runs fine, and makes 5 checks. At the 5th check at about 98% you better be there and when it hits 100% be a quick reader so you can see if there are any bad clusters. The screen stays there about 3 seconds and then disappears. If you have bad clusters the HD might be going bad. Question. How can I make the Error Check summary screen stay put while I read it or how can I make it "log" someplace where I can go and read it at my leisure?
View 11 Replies View RelatedI would like to run disk check but each time I schedule it and reboot, the message that I see upon reboot is that disk check has been cancelled. How can I get it to run?
View 2 Replies View RelatedThis is from my own computer ,it seems to have got slower and slower in starting up.
View 11 Replies View RelatedI have Windows XP Pro and trying to install Max Payne but it says I do not have enough system memory.how do i check system memory?
View 7 Replies View RelatedUse this if you just want to display your IP address and not the extra information (default gateway / subnet mask)Simply copy and paste the following into notepad@echo.@ipconfig | find "IP Address"@echo.@pauseAnd save as IP.BAT (save to your windows dir if you want to be able to access it anywhere)Now when you type IP you will see:---------------------------IP Address. . . . . . . . . . . . : x.x.x.xPress any key to continue . . .---------------------------(information about the code: @echo. produces a blank line, @ipconfig | find "IP Address" causes the output of ipconfig to be piped to the find command, which looks for the line containing "IP Address", find then outputs your IP address, @pause causes the terminal to wait for user input before continuing. The @ before each command tells the terminal not to echo the command being typed.)
View 9 Replies View Relatedi need to check my IP from a command line behind a router. I know there are several ways to gain your IP from online but in this situation it realy needs to be only from command line. anyone know any .exe's or commands that would allow this
View 5 Replies View RelatedI was smart enough to execute a file i THOUGHT was a .jpg, but it was in fact a shortcut (lnk).The file executed a large amount of commands in dos, and it took me about 1.5 seconds to close the program. I later found out that this "virus" was designed to delete system files from my system32-folder I don't know how much damage the execution did to my computer, but here's my question Is it possible to check if my version of WinXP is still "intact" or corrupt, if any important files really were deleted (without in fact rebooting)? I just want to find out if it is safe to reboot, so I don't need to backup my files and reinstall. I think win982000 had some kind of Systemcheck-tool, but I haven't heard of such a tool in WinXP
View 2 Replies View RelatedIn my computer I’ve two partitions, when I try to move one big file of 1GB to other partition it gives me this error “Cycle Redundancy Check�. But I can play this video file very well. But I’m unable to move or copy to another partition or DVD.Is there a way I can still save this file, some how? I know i shuld replace with new harddrive, but right now i want to save this file.
View 1 Replies View RelatedI want to download a Driver, and need to select one:
1. Download Nokia USB Driver v3.7.0(for 32-bit versions of Windows)
2. Download Nokia USB Driver v3.7.0(for 64-bit versions of Windows)
How do I check for 32-bit or 64-bit version of Windows XP Prof?
i've been having slow computer problems. lots of generic host errors and some programs that would hang and freeze the computer. i went to the Security area of this site for help. i had no major problems just a lot of startup programs i didn't need.i downloaded two programs to help me with that. then i decided to run defrag. that froze at 3% done. i also tried check disk, i got the screen to restart the computer. it was running fine. i had lots of bad sector stuff in stage 4. i went to bed at 24% next morning it still was at 24%. we left it on and it still would not move. so we restarted. i went and did a few more things, deleting things i no longer wanted and so on. last night i tried check disk again and i went to bed at 20% (tired). this morning there were no bad sector items, but it was still at 20%. i gave it a bit longer, but still nothing.
View 14 Replies View RelatedI am running windows XP home edition, file system FAT 32. Whenever I start my computer the disc check always wants to run on one or more of my drives. The checking will always stall at 0 percent and not check the drive. How can I get it to work? If I skip the disc check my computer will start up.
View 2 Replies View RelatedI have installed Office 2007 (home and product keyed and registered) on my HP Notebook. Since doing so I have tried all manner of ways to restore Spell Check on IE and thence OE. I have downloaded ieSpell, with no result. I have tried to get them to give me some help, but no reply! Please help me to get around this annoying problem, as I need something to help my spelling!
View 2 Replies View RelatedIs there a way to run a check disk if xp will not work? I had a system that started to give me strange error messages. I mean they were very odd. The last error that came up, said that I did not have a valid copy of xp and would not let me login to the PC. I even tried to login in safe mode, but that did not work. How would I go about fixing this?
View 4 Replies View RelatedLogfile of HijackThis v1.99.0 Scan saved at 2:30:42 PM, on 01/14/2005 Platform: Windows XP SP1 (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSsystem32spoolsv.exe............
Whenever I try to use certain programs I get a Bad Image error message. Something like, 'The application or DLL C:Programs FilesACD SystemsBCGCBPRO64.dll is not a valid Windows image. Please check this against your installation diskette.' The first time I got it, I ran a Google search on it and it told me to insert my Windows XP disk and type scannow into Run. This worked the first time, but now a get this error message popping up on several other programs and the scannow thing doesn't work.
View 4 Replies View Relatedevery 2 minutes i have the message on my desktop "windows security potential spyware operation . your computer is making unauthorized copies of your system and internet files . run full scan now to pervent any unathorised access to your files click here to download spyware remover..."
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:38:16 PM, on 9/11/2007
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)
Boot mode: Normal
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe........
Is there a fast and easy way to check to see if your drivers are updated and then an easy way to download them?
View 2 Replies View RelatedI have some questions about using checkdisk for xp. How often should you use checkdisk? What kind of errors does it really fix? Also, should you check " automatically fix file system errors" or " scan for and attempt recovery of bad sectors" or both? Any help would be gladly appreciated!
View 5 Replies View RelatedAfter a recent "Browser hijack" I cannot defrage my hardrive when I do a window appears saying it cannot defrge this volume as Chkdsk is sheduled to run!I have checked Sheduled tasks" and have stopped it from running I have no Idea what else to to.When I start my pc Checkdisk runs gets as far as stage two and stops with a message "checkdisk has stopped due to an unspecific error" when I run checkdisk in cmd window it will scan normaly in read only but if i run it with fix enabled it says "cannot lock current drive" and then offers me the option to run at system start up.
View 14 Replies View RelatedIv started getting strange errors on the computer like: "memory cannot be read/written" in different programs and different situations. I have run memtest86 and there doesn't seem to be a problem with the RAM. I have run a diagnostic from my harddisk maker and it checks out fine. I am suspicious of the hdd because of the following. When i run chkdsk it usually says: Errors found chkdsk cannot continue in read-only mode. I ran a boot-time check, with /r, but still when i boot to windows i get errors in the volume. This does not happen to my 2 non-primary hdds.
View 1 Replies View RelatedOut of the blue I thought it would be a good time to run Scandisk or Checkdisc. I did the usual thing and went to C properties and checked the two options where it said to have CHKDSK run on the next reboot. So after I rebooted I got a brief message that CHKDSK wouldn't run.Then I tried running CHKDSK in command prompt in Windows and it ran fine and reported some problems then it said to run CHKDSK /f and I did but came up with something about the volume is locked and all.So obviously I've got some file problems but what should I do. Run Recovery Console and run CHKDSK in there?
View 1 Replies View RelatedI have Win 2000 pro service pack 4. Running on a Sony Viao laptop. Something is screwed up on my C disc; trying to run checkdisk utility. Will only run in "read only" mode. Says I need to set "F" parameter to get out of readonly.How do I set "F" parameter? NOTE: I've tried running chkdsk from the RUN command in windows, also from the command prompt in safe mode. Same message each time.
View 1 Replies View RelatedCheck Disk scans come up OK, I've independently tested the Secondary drive with other drive utilities and it comes up fine. I'd like to unselect CHKDSK at startup. I was thinking it might be in the BOOT.INI file, but am not at home to look.
View 14 Replies View RelatedArticle 871211 is titled "How to check if you are logged in as an administrator and if a group policy is in place for your computer". When clicking on the link to the article, a message appears stating "The article you requested is currently not availble". Been trying for three days.Does anyone have this article or can shed some light on how to check if you are logged in as an administrator? Need to be able to do this in a script.
View 7 Replies View RelatedWhat is the command to run check disk in DOS? We can do that in XP with a regual startup disk right?
View 14 Replies View RelatedI KEEP GETTING AN ERROR THAT IT CANNOT CHECK LICENCING FOR THIS COMPUTER I HAVE TRIED STARTING IN SAFE MODE AND I CANNOT GET IT TO.
View 6 Replies View Related