Use this if you just want to display your IP address and not the extra information (default gateway / subnet mask)Simply copy and paste the following into notepad@echo.@ipconfig | find "IP Address"@echo.@pauseAnd save as IP.BAT (save to your windows dir if you want to be able to access it anywhere)Now when you type IP you will see:---------------------------IP Address. . . . . . . . . . . . : x.x.x.xPress any key to continue . . .---------------------------(information about the code: @echo. produces a blank line, @ipconfig | find "IP Address" causes the output of ipconfig to be piped to the find command, which looks for the line containing "IP Address", find then outputs your IP address, @pause causes the terminal to wait for user input before continuing. The @ before each command tells the terminal not to echo the command being typed.)
I am running Windows XP Homedition. I have two drives inside, the regular C: drive and I have a Slave drive F: with all my photos and music and documents. The problem I'm having is that everytime I restart or reboot my system it say it needs to check F: drive for consistency. It haven't been doing that until now. Then once it goes through that the system comes up. I try to click on an icon like my internet or registry program, nothing comes up, its like a read only file or something. Its not executing the program. THEN all of a sudden I get a blue screen. It says this::"Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver updates. try changing video adapters. "Check with your hardware vendor for aany BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use SAFE mode to remove or disable components, restart your computer, press F8 to select Advance SStartup options, and then select Safe Mode."
when i run chdisk for errors in win 2000 by right clicking the hard drive icon and then clicking properties of c: harddrive, then tools tab, then click the check now button, and in the check disk options ticking "automatically fix file system errors" and clicking ok I get this message "The disk check could not be performed because exclusive access to the drive could not be obtained. Do you want to schedule the disk check to occur the next time you restart the computer."If i chose yes to that above it performs the diskcheck at reboot and when windows loads i go back to the checkdisk and i get the same problem again.
im running a dell dimension 4600 and just today there is no sound from my speakers. I tried re-installing my driver, checked to see if it's muted, checked BIOS. It was working yesterday...Can anyone tell me how to check my Sound Playback device and playback programs? I'm using Media Player and iTunes I tried other speakers and there is still no sound Also, forgot to mention that my speaker makes a static/fuzzy noise when i turn up.
I'm saving picture and video files on separate DVD-RWs. I have Easy CD Creator 5x basic that came w/ the computer and updated it with the patch 5.3.5.10_basic. I pulled my first DVD from a year ago out and added pictures onto it from this year's trip. Original files were there as expected and additions were no problem. Secondly, I started a 2nd disc of all video wmv files. I filled that one to the hilt and do not wish to add to what little room is left.My settings are set thusly: "The selected Record Method finalizes the session. The CD itself is not finalized so additional sessions can be added later. To change this setting click options."Actually, this is the setting I prefer, but in the case of the second disc, it's full for me now and if I wish to possibly play it on my DVD player it needs to be finalized.Problem is, this option isn't available (appears all faded-out) when I click on file, and appears the same to the lower right when I'm looking at disc properties. Only real option in bold black at these times is ERASE, and I don't want to do that! The discs play great on my computer, all material is recognized, etc., but this inability to finalize has me confused. Certainly in theory, a RW disc by its nature will never be truly finalized. Is that what's holding things up? I do believe I should be able to finalize these,
An easy way to hide the Recycle Bin is just to create two .reg files.... open your notepad and copy and paste the listing below and save it as Hidebin.reg and click the .reg file to enter it into the registry. You have to refresh the desktop to see the changes.
REGEDIT4 [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerHideDesktopIcons] [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerHideDesktopIconsClassicStartMenu]"{645FF040-5081-101B-9F08-00AA002F954E}"=dword:00000001 [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerHideDesktopIconsNewStartPanel]"{645FF040-5081-101B-9F08-00AA002F954E}"=dword:00000001 Â To bring back the Recycle Bin, open notepad and copy and paste the listing below and save it as Showbin.reg and click the .reg file to enter it into the registry, once again refresh the desktop to see the changes.
If you need to re-install a hidden Windows component, there is an easy way to do this. Open the INF folder in your windows folder [C:WINDOWSINF] Find the *.inf files. Find the application title you need in the filename [for example messenger is msmsgs.inf] If you are unsure of the installer, RIGHT CLICK on the file, then select open, at the top of the file should say what application it is:; MSMSGS.INF; Setup INF file for Messenger When you have found the file the right click on it then click install.Tip: To reinstall Microsoft Outlook Express, Right click and select install on MSOE50.inf.
NT Backup is, by default, installed only with XP Pro.To install it in XP Home Editon doubleclick this file on your XP cd:VALUEADDMSFTNTBACKUPNTBACKUP.MSI.Start>run>NTBACKUP.
I have updated to win xp from win me. The Adaptec Easy CD Creator will not work as a message comes up saying "Drivers are not compatible and could cause problems" so they don't load when I have reinstalled the program.This came with my computer when I bought it with win ME. I have the original disk. I have looked at the web site which now is Roxio, but cannot get a straight answer as to what and where the drivers are to download. They keep wanting me to buy their ver. 10 which is $70. All I want is the program I had before no fancy technical program. I just copied some floppy's and cd's. I don't need all that photo stuff that is on the new program. Also do not need to copy DVD's.I read about registry, but don't want to mess with that after getting my computer running smooth now that I have the Win XP installed.What drivers do I need? When I find a web page their are so many I don't know what to do.
I have Roxio Easy CD Creator but can't burn MP3s to a CD. The Roxio Drag and Drop always has the CD drive locked. I get an error in Easy Cd Creator about this. I can't find any way to turn off Drag and Drop.
I am looking for a free PDF creator program that is easy to use. I need to deploy this on about 50 PCs in my office and it needs to be idiot proof, I looked at some of the open source PDF creators and they work well but have too many options for users to screw up. I just want something that lets you print to the PDF printer and then save the file as PDF.
I installed XP Pro 64-Bit to run alongside my Windows 7 install - unfortunately XP did not detect Windows 7 and I used EasyBCD in XP to create the start-up dual-boot entrys...windows 7 (C) - default Windows XP (E) 3 seconds
Instead of going into the register, it is simpler to open Windows Explorer, find the .exe file that you want, right-click on it and choose send to desktop.
As mentioned in another question, I need to design and maintain a website to show and sell my wife's artwork. It will be as simple as I can make it, very clean and straightforward, consisting of text and photos of the work for sale and a method of ordering and paying. So I'm essentially looking for a program without a lot of bells and whistles--a program that will make the process as easy as possible for me. I'm a very senior citizen and although I can slowly make my way around in this business, I'm not much of a computer whiz.
Does someone know of an application that makes personal information like Name, Address, Phone, password (s),etc. available to be pasted when required. Like using the right click to select various entries.
WinExplorer -> right click C: -> go to properties -> go to tools click error check. Will get message that error check will start at the next start up. Problem. Error check runs fine, and makes 5 checks. At the 5th check at about 98% you better be there and when it hits 100% be a quick reader so you can see if there are any bad clusters. The screen stays there about 3 seconds and then disappears. If you have bad clusters the HD might be going bad. Question. How can I make the Error Check summary screen stay put while I read it or how can I make it "log" someplace where I can go and read it at my leisure?
I have a dell inspiron 6000, with a dvd drive. I've installed Roxio Easy media creator 8, evertyhing was perfect, until i insert a data disc, the computer became freezed! and the problem is with every disc, it looks like a conflict, because i leave the computer, for like 20 minutes, and when i came back, the computer was normal, and allow me to use it like nothing happened. I uninstalled the Roxio Software and the problem was solved,
I've been having a small problem with Roxio's Easy CD Creater 6. I installed the program on my computer an I was able to burn Cds and DVDs ok. Then I installed iTunes to connect to my iPod. I then tried to use Roxio and it could not find my DVD RW drive!! I then uninstalled Roxio and then installed it again. I could then find the DVD RW drive but iTunes said it could not initiallize the drivers to burn CDs. How do I setup my computer so I can use multiple CD/DVD buring software packages?
I tried to transfer pictures from a card reader (Sandisk) to my PC. I followed the instructions, but nothing happened. I have never used the USB ports before until now. Could it be that they are not working? Supposedly I have USB 2.0. Is there an easy way to check that these ports are operational?
This one is super easy,first open X:Documents and SettingsusernameSendTo (it is hidden)where X is your drive letter and username is your usernamemake and delete shortcuts to folders at will
My computer is often showing blue screens and nothing I've done seems to correct the STOP 0x00000050 error about "page fault in the non_paged area". So I guess is time for me to back-up everything ASAP. Which I never did. Because I don?t know how. Could someone with good will guide me on the steps to get an EASY & SAFE back up using CD's ?
i need help with my dell easy note laptop well when i turn it on it comes up at the bottom with a progress bar (almost like the one if you shut the lid and open it and again and it says resuming windows) wich takes a very very long time to complete and when it dose it then starts windows any idea how to make this startup quicker or maybe even get rid of that bar altogether
I have a new computer with a 120g hard drive and a 20g hard drive as a slave. I also have 1 gig of memory.In setting up partitions for my computer, is it ok to have just one partition or should I make several?I do nothing fancy on this computer as far as gaming or any type of designing. All I am interested in is just an easy way to setup and maintain my system.
OS NameMicrosoft Windows XP Home EditionI have finally been put into the position of a must have win XP...ok...but now seem to be running slow even after defrag seems like a time thing...in that I get that slow movement on some things but not on others...think I have enough memory & a 20gb hard disk I have also run an up to date virus & spybot they all check out OK...I am really lost in the amount of information available on the xp forum...quite good but feel that there must be a smarter place to start looking
i needed to reformat win xp home and i cannot install Roxio because the upgrade advisor is incorrectly reporting incompatibility. (i am at win xp sp2) I did thisds before and it reinstalled nicely a copla years ago Microsft recognizes it they had a page on it in Help and Support (i put in Roxio Creator 5.1 Basic. it told me to try a couple things but to no avail and the workaround says ignore it..IGNORE? HOW?It can't be ignored cause it won't let me install. this is the disc that came with the puter (Dell Dimension 8100) a few years ago. would anybody have any ideas of how to install Roxio (i cannot afford to buy any new software right now and using WMP 10 is just not as comfortable Roxio is easy and it also writes text so the name of each tune that have bought and burned to a CD-R that I play shows up on my car CD player.
How can I tell whether my motherboard has USB 1 or USB 2.0?If the motherboard can only support USB 1.1, how can I have it to support USB 2.0? Do I need to update or install anything?
I would like to run disk check but each time I schedule it and reboot, the message that I see upon reboot is that disk check has been cancelled. How can I get it to run?
