I switched on the PC (Have a dell with xp) to find a blue screen with asking me to do something to anti virus .. run chkdsk /f and then a code: STOP: 0 X 00000024 (0 X 00190203, 0X8239C2CO, 0 XC0000102, 0X00000000)
Well I would run chkdsk /f but cant!
It wont load in safe mode/last known figuration etc.. just reverts back to the blue screen.
Most sites seem to sugggest running the XP disc. When I put this in, I press F12 as soon as I get the PC on, then 4, then any key to boot from Cd. Then a screen which says Press Enter to setup XP, Press R to enter the recovery console etc.. However when I press either Enter or R the screen appears as though its doing something for a brief second, but sticks on the same screen for hours with a message on the bottom saying : Examining 152587 mb Disc 0 at ID 0 on bus 0... It didnt do this last time i had a blue screen problem about 6 months ago, just loaded up staright away.
So I am stuck. Either it goes back to the blue screen or it supposedly examaning something. Is it supposed to take ages?! I tried F8 and all the Safe Mode/Config options. If there was another way to run chkdsc /f I might be ok but I really haven't got a clue and seem to be going round in circles.
i need any kind of help that doesnt just say boot from the windows XP installation cd- because I cant,To my knowledge nothing new has been installed...
The problem I am having happens when I shut down my computer. I shut down using proper procedure: start menu, shut down, then yes. The problem comes up after windows finishes logging off and shutting down. A blue screen comes up and I�m forced to shut it down manually
About my BSOD problem w/ my Windows 2000 Professional 2Pk operating system. Computer will not startup properly then goes to blue screen
I've been looking for help online and speaking to people but everyone is down on me for still using Windows 2000 Professional. Am willing to upgrade to XP if I can figure out the current problem
I am working on a HP Pavilion a462x running Windows XP Home Edition. The computer will load all the way up to the Windows XP screen, flashes the "blue screen of death", and then reboots. The owner of the computer no longer has any recovery discs. I have run CHKDSK /R several times to no avail. I have a Windows XP Professional disc. Is there any way to create a recover disc for the HP? Am I completely overlooking something?
I know most people dont like dells but i have one. I have a dell dimension 8300 with P4 3.0, 1.5 gig ram, 120 gb hard drive, and 6800xt graphics card. I downloaded speed fan program just to see what it was like and it stopped responding. so i waited for it to "end now" and it wouldnt. i got impatient and shut the computer off manually with the button. i went to go turn it back on and the bios screen would load then the windows xp screen comes up with the scrolling blue bar. after that it goes to a black screen with no error messeges and no cursor.
I am trying to become computer smart......still working on it. My problem....Blue screen will not load nt4 os......BS states memory dump. Tried to restart......not working. I can enter, and did, f2 startup. I read where I needed to delete an old partition, did, now nt4 startup disk with not load, as i am prompted that the drive is too big (3.99). I cant seem to partition the drive? I would like to just start from scratch, wipe drive, start over..I just want to get this going so I could update nt4 (currently has sp1). I think I have my work cutout for me.
I have got a HP Laptop that is about a year a half old, its top of the range. I had my laptop in Hibernate mode the other night and the next afternoon I went to turn it back on there was a blank screen for a long time, all the lights on the laptop were on but nothing on the screen. I turned the laptop off and then back on again. and BOOM! The blue screen of death!The computer starts up with the HP logo and then it pops up a screen saying that a previous attempt to start up had failed and it gave me options to start up in safe mode, safe mode with networking, safe mode with command prompt, start with the previous successfull start config, and normal start up. When i click ANY of these the windows logo pops up for about 3 seconds and then the blue screen, which appears for long enough for me to read 3 letters or numbers at a time. Then the computer restarts and we go through the whole process again. This is what I have done in the hope of fixing it.
I used my HP retore disks and it loaded disk 1 of 3 and it didnt ask for the other 2 disks which i thought was odd. But that made no differeance still the same start up process as explained above.The blue screen made mention of chkdsk and i read about some poeple on the net doing a chkdsk and it fixing similar problems. So i read that i needed a xp install disk to access the windows recovery console and type r. BUT i have a OEM installation so i have NO disks! So what i did was i got the XP Pro disk i have from a few years ago that i had on Desktop. BUT when it goes into recovery console it can not find any hard drives! #Ive tried spinrite and it reads all the hard drives in the computer so i know that they are still there. #I've tried to find some chkdsk bootable cd's but most are either floppy only or they only for FAT16/32 file systems, my file system is NTFS.I'am convinced from the research done that if I can run CHKDSK on the computer then it should fix the file error and then i can at least back up my data and then do a full format and start fresh again. But I have to be able to get this computer running.I just tried the "Last Known Good Configuration" selection and it says that the system32/config/SYSTEM file is missing.I would welcome any help, as I have exhausted all options that I can see available to me. From what I can see, the biggest problem is that im running a OEM version of windows. But then again the recovery console couldnt find the hard drives, so i dont know.
i have a toshiba laptop with Windows XP home installed the computer loads till where it says Windows Xp home edition after that hte screen goes blank and a blue screen appears and disappears really quick i was wondering if there is any way to fix this
I am running Windows XP Pro and it will not load properly. The Windows logo comes up with the progress bar running underneath and it will just stay that way for hours. Nothing ever loads. I have to use the F8 menu and use the "last known good config" to use the system. I have gone into the repair mode and run a chkdsk and fixboot but nothing is helping. I also updated to the latest BIOS just to be sure but the problems stays.
I have been trying to install my scanner and everytime I put the CD for the scanner, and hit run to load it up, nothing happens, I tried both the cd and cd/rw drive and nothing.I also checked the device manager to see if everything was there and it was.
I am trying to reformat my computer, somehow it got deactivated when it is ALREADY activated, but when I restart with my Windows XP Home CD in the drive, it wont read it when the computer is starting.. Any Suggestions?
Also for that XP Activation
I log in and then it pops up saying its not activated and asks if I want to activate or not so I click the activate button and then it says something of this sort "You Are Already Activated".
There was a power outage in my area and my computer restarted. After restarting it would hang at the Windows loading screen with the blue bar, and it would stay like that forever.
I have just installed new memory,new graphics card geforce 8800gt,new power supply,and new sata hard drive.
I have made a floppy disk from the motherboard cd for installing the drivers during windows instillation from my old pc first.
I switched on new pc to load windows and i get no signal on my monitor also my usb mouse and usb keyboard does not light up,iget power to motherboard and case fans +dvd drive,i have put my windows xp os disc into dvd drive and basically it does nothing.
Do i need to make a windows boot disc or something to start instillation.
I still have windows loaded on my secondary sata hdd but the system32 is corrupt,so i have opted to install new sata hdd,then transfer my files from secondary hdd,once that is done gonna format secondary drive and use it for storage.So i still have the option of entering the bios on my motherboard if i connect it up and disconnect the other drive.
I have left the drive disconnected while i install windows then gonna plug it in after windows installation.
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
My HP Laptop is about 4 years old, but still works great... until a few days ago. When i start it up, the loading screen comes up and finishes. Then it goes black, and stays black. I CAN however boot in safe mode (not safe mode with networking tough), and it works fine. I am also having problems finding my CD, but have the License Code. So a No-CD Answer would be wonderful
I have a problem with my XP Pro, I can never get past the boot screen (the one with the XP Pro logo and has loading), it would try to load but would never happen. So I tried rebooting in safe mode and it works, I scanned my HD with AVG, Adware, Norton and Spybot. On several of them I found ISTBar and DYFUCA on my computer. So I deleted them with my program, then I deleted all my temporary files, in C:windows emp C:document and settingsuserlocal settings emp and internet temporary files including offline files. Then turned off system restore, and rebooted. It worked however today when booted up XP again same boot screen problem. Can you tell me how to fix this problem?
whenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
I need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
My computer after, we believe, a power surge during the wee hours of the morning a week ago can no longer totally boot up. Once powered on, it will go to a black screen, detailing how windows did not start properly. And something about it being due to or causing a hardware or software change.
When I booted up I got a windows installer screen asking to put in the disc to install paint shop. Since I was on the road and did not have the disc with me and don't use Paint shop I uninstalled it. when I boot I get a screen that just says windows Installer and it is very hard to cancel it
My Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
In need of some major help, whenever i load up my computer everything loads up fine untill i get to the status bar screen which just loops and loops over and over again and nothing happens from that point onwards not only that but it knocks out all my devices i.e keyboard, mouse etc. I can open it in safe mode no problem and in this i have done numerous system restores. If i leave my computer off or idle for about 12 hours it worls again after that but about 2-4 days later the problem happens again this has happened aprox 7 times now. I really need someones help as this is my main computer and i have everything on it
so every time i boot the computer i get that good ol' blue screen of death right where windows should open to my desktop.. instead it says "welcome" with the light blue background.. the screen goes black and then comes back with the blue screen.. the message on the screen says:
stop: 0x0000007a (0xe16dac70, 0xc0000185, 0xbf985c66, 0x20e18860) win32k.sys - address bf985c66 base at bf800000, datestamp 41107f7a
beginning dump of physical memory dumping physical memory to disk: and counts up to 100 then the computer restarts. i was able to get into safe mode to try a system restore but when the computer restarted it never finished the install (it actually gave me the confirmation that the restore was successful while i was doing a repair install later on) i have tried going through the windows install disc repair utility and doing a chkdsk /p and a chkdsk /r upon doing /r it froze at 53 percent and did not move (i left it for a good 4 hours the first time before restarting it.. and then over night the second time.. and both times it never passed 53 percent............
I'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
First my computer was cutting off in the middle of any program. I decided to delete everything on the drive and reformat it and reload windows xp. While trying to load windows xp it would load the set up but when going to load files it locked up everytime. I tried also loading windows 98, 95 and they too locked up. At one point it said I had a virus in my boot sector and at another time it said I had a virus in my RAM. I got a program called PC Beginner to help partition my drive and redo the MBR. I can partition the drive and format it but windows still doesn't load. Now I wonder if there is a problem with the mother board and I have a dual bios board, I was wonder if there is a program loaded in the dual bios that may somehow causing my problem. If so what can be done to clear the problem? How can I get windows reloaded?
My packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
