I know most people dont like dells but i have one. I have a dell dimension 8300 with P4 3.0, 1.5 gig ram, 120 gb hard drive, and 6800xt graphics card. I downloaded speed fan program just to see what it was like and it stopped responding. so i waited for it to "end now" and it wouldnt. i got impatient and shut the computer off manually with the button. i went to go turn it back on and the bios screen would load then the windows xp screen comes up with the scrolling blue bar. after that it goes to a black screen with no error messeges and no cursor.
I have been experiencing intermittent bootup problems with Windows XP. When this happens, the XP splash screen appears(blue line scrolling) and then monitor loses signal and reboot occurs. This can cycle several times, even if I choose the option of starting Windows with last known configuration that worked. It always eventually loads and reports that Windows experienced a serious problem.
A few weeks ago it started freezing and restarting randomly. Sometimes, on restarting, I would get the "Serious error" pop-up, which I always sent, and always got different results. Sometimes it would say it was an unknown driver error, sometimes an anti-virus error, once a RAM error. I had just upgraded the RAM when this started, so I ran the M$ testing tool several times, no errors. I also removed the new RAM, which didn't solve the problem, and put it back in
Have a Dell Dimension 2350 at home with XP as the OS. Rarely use the PC because it is on NetZero's free dial-up. Has current CA Internet Security Suite too.
Getting the blue screen occasionally when I start NetZero's free dial-up program. The blue screen will appear right as the PC is trying to open up a Internet Explorer window, after the dial-up connection has been made successfully. The blue screen states to disable BIOS, but I don't have a clue how to do that
I've got a problem that, if fixed, would by-pass other problems. I got a virus on one of my Dell Dimensions (E521) and figured I would simply just reformat the hard drive and do a clean install of Windows XP. I backed up all my information, put the hard drive in my second PC (E520) and reformatted the hard drive. So I ended up getting Windows XP installed on this newly reformatted hard drive by using my second computer (E520) to reformat then install using the Dell operating system disk.
I put the hard drive back into the first computer (E521) where it came from and I get this blue screen error with "Stop: 0x0000007B" I know that this means there are a lot of different things that could be going wrong, but it is mostly due to the computer not being able to load the OS from the hard drive. This is a big problem, but the bigger problem is my USB keyboard is not being recognized at start up on the first PC (E521) meaning I can't get into bios or do anything really since when the hard drive tries to load it gets this blue screen error.
I've tried updating my bios by making a bootable bios update disc and forcing my computer to start from disc by unplugging my hard drive, but it wouldn't work because I needed a keyboard to start the bios update from the disk in the dos prompt. - If there's a way to make the update start automatically it may update the bios, fix the keyboard problem, where I'll be able to get into bios and make sure the hard drive is being recognized properly. I figure if I can fix at least one of the problems I'll be able to fix the other. If I can get by the blue screen, I'll be able to get to windows and do a bios update there since the keyboard will be recognized OR if I can get the keyboard to work I'll be able to get into bios where I'll be able to fix the hard drive problem.....
Computer upstairs every time i start it up after 2 mins i get the blue screen of death tells me something about deactivating bios chaching and shaowing or something and this is the STOP msg.*** STOP: 0x0000008E. I managed to get Registry Fix and i scanned my pc and cleaned it that but the problem is still happening.
I am working on a HP Pavilion a462x running Windows XP Home Edition. The computer will load all the way up to the Windows XP screen, flashes the "blue screen of death", and then reboots. The owner of the computer no longer has any recovery discs. I have run CHKDSK /R several times to no avail. I have a Windows XP Professional disc. Is there any way to create a recover disc for the HP? Am I completely overlooking something?
I switched on the PC (Have a dell with xp) to find a blue screen with asking me to do something to anti virus .. run chkdsk /f and then a code: STOP: 0 X 00000024 (0 X 00190203, 0X8239C2CO, 0 XC0000102, 0X00000000)
Well I would run chkdsk /f but cant!
It wont load in safe mode/last known figuration etc.. just reverts back to the blue screen.
Most sites seem to sugggest running the XP disc. When I put this in, I press F12 as soon as I get the PC on, then 4, then any key to boot from Cd. Then a screen which says Press Enter to setup XP, Press R to enter the recovery console etc.. However when I press either Enter or R the screen appears as though its doing something for a brief second, but sticks on the same screen for hours with a message on the bottom saying : Examining 152587 mb Disc 0 at ID 0 on bus 0... It didnt do this last time i had a blue screen problem about 6 months ago, just loaded up staright away.
So I am stuck. Either it goes back to the blue screen or it supposedly examaning something. Is it supposed to take ages?! I tried F8 and all the Safe Mode/Config options. If there was another way to run chkdsc /f I might be ok but I really haven't got a clue and seem to be going round in circles.
i need any kind of help that doesnt just say boot from the windows XP installation cd- because I cant,To my knowledge nothing new has been installed...
I am trying to become computer smart......still working on it. My problem....Blue screen will not load nt4 os......BS states memory dump. Tried to restart......not working. I can enter, and did, f2 startup. I read where I needed to delete an old partition, did, now nt4 startup disk with not load, as i am prompted that the drive is too big (3.99). I cant seem to partition the drive? I would like to just start from scratch, wipe drive, start over..I just want to get this going so I could update nt4 (currently has sp1). I think I have my work cutout for me.
I have got a HP Laptop that is about a year a half old, its top of the range. I had my laptop in Hibernate mode the other night and the next afternoon I went to turn it back on there was a blank screen for a long time, all the lights on the laptop were on but nothing on the screen. I turned the laptop off and then back on again. and BOOM! The blue screen of death!The computer starts up with the HP logo and then it pops up a screen saying that a previous attempt to start up had failed and it gave me options to start up in safe mode, safe mode with networking, safe mode with command prompt, start with the previous successfull start config, and normal start up. When i click ANY of these the windows logo pops up for about 3 seconds and then the blue screen, which appears for long enough for me to read 3 letters or numbers at a time. Then the computer restarts and we go through the whole process again. This is what I have done in the hope of fixing it.
I used my HP retore disks and it loaded disk 1 of 3 and it didnt ask for the other 2 disks which i thought was odd. But that made no differeance still the same start up process as explained above.The blue screen made mention of chkdsk and i read about some poeple on the net doing a chkdsk and it fixing similar problems. So i read that i needed a xp install disk to access the windows recovery console and type r. BUT i have a OEM installation so i have NO disks! So what i did was i got the XP Pro disk i have from a few years ago that i had on Desktop. BUT when it goes into recovery console it can not find any hard drives! #Ive tried spinrite and it reads all the hard drives in the computer so i know that they are still there. #I've tried to find some chkdsk bootable cd's but most are either floppy only or they only for FAT16/32 file systems, my file system is NTFS.I'am convinced from the research done that if I can run CHKDSK on the computer then it should fix the file error and then i can at least back up my data and then do a full format and start fresh again. But I have to be able to get this computer running.I just tried the "Last Known Good Configuration" selection and it says that the system32/config/SYSTEM file is missing.I would welcome any help, as I have exhausted all options that I can see available to me. From what I can see, the biggest problem is that im running a OEM version of windows. But then again the recovery console couldnt find the hard drives, so i dont know.
i have a toshiba laptop with Windows XP home installed the computer loads till where it says Windows Xp home edition after that hte screen goes blank and a blue screen appears and disappears really quick i was wondering if there is any way to fix this
I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
i have windows xp home edition. I recently got my computer back from being serviced and the way it scrolls down the page using the mouse is like it is "rolling" or "wavy" and I miss alot when trying to read any page. it is very annoying. I want to get it back to the old, standard way that I can just scroll down line by line. Does anyone know what I am talking about and can anyone suggest something to try to correct this.
When I operate the scroll bar, instead of a smooth scroll down or up the page, the scrolling occurs in jerks, making the page appear to "ripple". I am using windows XP. In addition, when I watch DVDs the crarity is not so good. It has only just started happening.
I have recently been given a processor by a friend who was having problems when trying to boot windows.It would get to the boot screen with the scrolling bar then freeze up. The friend said that when he booted in Linux he had no problems. I have a machine with a new MB and new memory in which I installed the processor.I booted from my Windows XP Pro Disk and did a full install.When finished the same thing happened, it would freeze when it got to the Windows screen with the scrolling bar.I do not know much about computers so assumed that if the processor was faulty the computer would not go through a windows install or work with Linux.
There was a power outage in my area and my computer restarted. After restarting it would hang at the Windows loading screen with the blue bar, and it would stay like that forever.
I tried installing the latest security updates from microsoft 2 days ago.. One of them KB980218 refused to load at all after i tried 12 times.. after reading alot i read its because its NOT supported by my older version of Windows.. Im running Windows 5.1 i believe there are NOW waves in all my pages when im scrolling up or down in all my images. web pages. etc.. terrible waves like its having a hard time even scrolling.. the images are in waves..AND my Mc Affee virus scan gets to 788 files (20%) scanning and just stops.. wont complete a scan.
Had been running XP Home for 2 years with NO UPDATES. Daughter brought it home and DAD decided to allow all the updates using Windows Update.Everything through SP1 installed fine, but SP2 choked.Computer was running well with SP1, so I forced my luck and allowed SP2 to be added.What a mistake.Now, when I boot it, after the Windows Splash screen with the scrolling dots starts, it chokes back to a black screen, an error message appears that is so transient that I can't read it - mostly 0x000000, but there's a 0x000008 in the bunch.
I've recently reistnalled XP and I'm experiencing weird problems when moving windows on the screen, or scrolling, everything is in slow motion.I can't play movies on full screen, and some games are poor in rendering. I have tried all the possible optimizations, but I believe the problem might be in the video card, when I tried to reinstall the video driver, I was told that the video card is not installed properly, but how could this be? I mean, I haven't touched the hardware, what am I supposed to do?
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal. It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
Ive done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
whenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
I need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
I have a Dell inspiron 530s.Yesterday I ran an spyware doctor scan on my PC went to the shower and when I came back 30 minute's later the system had froze.I could not do anything so I turnt the PC off and rebooted.However when it rebooted it would not go past the Dell screen,that come's up straightaway,and the F12 and F2 key's are unusable as nothing whatsoever work's.I have tried rebooting taking out all connected thing's ie mouse speakers and wireless dongles,turnt it off for an hour and still nothing work's.All light's are on,monitor work's but the only thing that seem's to be missing is the light's on the keyboard num lock etc.
My Dell Inspiron 2650 laptop on boot-up consistently gives a blue screen with ERROR (0X000000ED (0X81ACA988, 0XC0000006,0X00000000,0X00000000). I have read most of your fixes BUT in my case no matter what I do it ALWAYS boots to this screen. Trying to boot to Safe Mode results in a list of drivers prefixed by ?multi(0)disk(0)rdisk(0)partition(2)c:windowsdriver.sys etc The machine will not boot from Floppy or CD and I?ve tried every combination of boot sequence under the F12 menu. In the BIOS it will not allow me to change any relevant settings, only the ?system date?, ?system time? and ?quiet boot?.and I cannot select the dropdown menu items either. Booting under Normal Startup, I see the Windows Logo and all that, but then the blue screen appears. I?ve tried removing the hard disk to get it to boot to floppy, removing the battery (which is totally dead), memory module, etc. Only thing left I think is to sling it in the Caribbean Ocean and go drink a bottle of rum.
