I recently did a clean install of XP on a new HD, leaving my old drive and OS in place for later use. The drive configuration is Cable Select, with the new drive in Master position (at end of cable). The problem is that I can't seem to access my old OS on the old drive. When I boot up there is no choice of Windowx XP or ME (old OS). When I enter F8 and go to where there is a choice of OSs, XP is the only one listed.
My BIOS is set to recognize both drives and it shows them in place, with XP as the Primary Master and ME as the Slave. I tried swapping the order, but then the computer wouldn't boot.I posted over at Tom's Hardware and was told the MasterBootRecord didn't get set up properly because I installed XP when the drives were in Cable Select configuration and the only way to solve the issue would be to reset the drive jumpers to Master/Slave with XP as the Slave, and re-install the whole OS all over again, then return the drives to Cable Select.
up to recently I had a Multi boot system, i have a 120gb HD it had 20gb for XP for my Famliy, 70gb for me, and 20 for backup. I Decided to make a pc for everyone else and once i copied there files with Partition Magic formated there partition which was C:, now i cant access my partition
A friend of mine needs win 2000 Pro boot discs. I don't think this is illegal as a microsoft site says if you have problems to make from a friends. He is the only person I know who has it. Need the discs to access his system. Probably infected. Cant get it to start, shutdown, nothing. Sometimes monitor says no signal. Sometimes works. Checked wires. Put in an old spare video adapter card, starts to work fine but freezes before I can do anything. I do not have a floppy drive so I need to be able to burn them to a CD.
I have a old Sony VIAO PCV-1112 with Windows XP. I was out of town (so I don't know what the trigger for the issue was) and came back to a black screen that begins with "Award Medallion Bios v 6.0". It also says "Hardware Monitor found an error. Enter power setup menu for details." At the bottom of the screen is shows: Press F1 to continue. F2 to enter setup. a. Nothing happens when I press F2. b. When I press F1, the Windows loading screen appears, but it fails to initialize XP and goes to a black screen that says that Windows failed to load...and it lists the prompts to reboot in Safe Mode, Normal Mode, Normal Mode with prompt, Normal Mode with Networking, Last Known Good Config, etc. No matter which mode I choose, it reboots and goes back to the Award Medallion Bios v6.0 message screen. c. When I press Esc > F8 > F1, I am able to get the boot order to pop up and I selected boot from DVD/CD drive. I've tried putting various iso files on disc into that drive in the hopes of trying to get in to recover data files off the HDD. I tried rebooting with the ISO file in the DVD/CD drive, and nothing happens with any of these: Bit Defender; Kaspersky Rescue; or Avira Rescue. I rebooted with the Knoppix rescue ISO, and it actually initialized the DVD/CD drive for about 30 seconds - showed a black screen with a flashing prompt (couldn't type anything though) and then it went back to the Award Medallion Bios v6.0 message screen. I thought it might be the way I copied the ISO files; since when I copied them on my HP laptop, I got warning messages that not all related information would be copied. So I'm looking for an ISO copy app that might help with that? Unless I'm barking up the wrong tree...? d. When I put in the Windows Recovery CD in that same drive, it does pull up the recovery GUI - but I don't want to loose my data. So it does recognize that Windows ISO.I'm at a loss on how to get into the VIAO hdd to try to copy down the data files that I need, before restoring Windows XP. Is there a way to connect my laptop to the PC to try to copy down the files? I'm a computer newbie, so I need a walk through on what to do.
I'm having a problem that I could really use some help with. Two days ago I started having a problem accessing the internet after re-booting my machine. My machine is virus free, I'm sure of that. I thought it was some software that I had installed eg. ProSecurity. I uninstalled all traces of it. Still I have this problem. After re-booting I need to manually re-start my router in order to connect to internet or send/receive mail. I can get an IP but can't ping anyone. In Event Viewer I have these msg's.
1)The IP address lease 192.1 for the Network Card with network address 001151 has been denied by the DHCP server 192.XXX.XXX.X (The DHCP Server sent a DHCPNACK message).
2)Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 001151.The following error occurred: The operation was canceled by the user. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
3)The IPSEC Services service terminated with the following error:an invalid argument was supplied.
My pc at home has been out of business for a few weeks now because it will not boot into XP (I think a virus). I have a parallel installation of Win 98 which will boot but I can not see the other C: or F: drive where I have XP installed, in My Computer, and where all my photos etc are saved (stupidly). All it shows is the 2gb in which it rests. is there a way to access the files on XP, which I assume are on a different partition from Win 98, through 98.Then I could reformat the hdd and reinstall XP (ps I don't have the XP disc now so cannot get into Recovery)
How to access the advanced option table (don't know how that's called) ? the one some computers can access by hitting the delete key. But it doesn't work for my computer.. Or is there any way to change the boot sequence?
I need to reinstall the OS on the hard drive, but I have to try and get some files off of it first or can I install new OS over the old one without a loss of my files?
A few days ago strange lines started appearing on my computer screen. It has progressed and I could barely see anything. Then monitor kept going into "power saver" mode and back when I booted Windows in normal mode. I booted Windows in "safe mode". Monitor wasn't shutting off anymore but the screen was barely readable.I managed to save my data on external drive. I put in my Windows installation disk and restarted computer wanting to format the hard disk and reinstall Windows.When I would restart I would see black screen and hear DVD drive spinning but nothing was happening. Now when I restart I see this .This screen just stands there. I cannot access the BIOS, load Windows or boot from CD/DVD. All 3 fans in my comp work fine when computer is on. I tried removing this battery and putting it back later but it didn't help. My computer has 2 gigs RAM, runs Win XP Professional SP2 and this is my motherboard .At this point I have no idea what to do or even what caused this. I was hoping to format and reinstall Windows but I'm unable to boot.
I am unable to go into my windows xp desktop. The computer boots and stops with the following menus. 1. Safe mode 2. Safe mode with networking 3. Safe mode with command prompt 4. Last known good configuration 5. Start windows normaally. I selected each prompt but none of them let me in to my desktop. Instead after each booting it keeps on bringing me to the very same menus mentioned above. I need an immediate help that will help me solve this problem in order to be able to access my Desktop.
I've got a Gateway laptop and it's giving me the unmountable boot volume blue screen of death at start up. I've scoured the internet and all the solutions tell me I need to use the Windows setup screen to get to the recovery console. My problem is that my computer never gets to the setup screen. I restart with the gateway XP disk and it looks like it's setting up, but then nothing happens, and I don't get any sort of screen that lets me access the recovery console.Is there any other way to get this thing working again, my finals are due the end of this week, and all my most recent/finished files are on this thing.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
I"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done: 1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%) 2)Removing all connected Componets and rebooted, same problem. 3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
hey anyone remember that boot disc that had everything and it also had a mouse function in it? it was like boot magic or something i cant really remember. I only remember it had 2 versions one was the floppy which was free and the other you had to pay for the cd version
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
I cannot boot windows, I think my boot file is corrupt and would like to know if I can use a boot cd instead of a floppy.I would appreciate it if someone could tell me what i need to do.
i was trying to restore my backup of the partition with the windows xp system on it. Of course, everything went wrong and Norton Ghost 2003 had an error at about 95%. I thought i can just boot from the win xp cd and fix the problem... no way when i try to boot from the win xp cd, i get a black screen after checking my pc configuration, no driver loading etc.
when i try to boot from my sata drive, it says that there are some missing files (that's not strange, if ghost didnt work like it should) when i try to boot from any other drive i get an error like this: A problem has been detected and Windows has been shut down to prevent damage to your Computer. If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow thease steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run chkdisk/f to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,0x00000000)
Dell D 800 Laptop running XP SP2.Internal AND external Keyboards and Mouse NOT working after boot to XP. Can't enter cntrl/Alt/Del or anything to log in. Keyboard DOES work in Bios mode but is lost as soon as xp is loaded. Does NOT work in SAFE mode either because can't log in..(no Cntrl/Alt Del).I've tried repair and reinstall of xp but still does not recognize any keystrokes after boot to xp.
I am trying to access the My Documents folders form an older hard drive that is no good (something is corrupted within Windows and the machine won't boot). I am going to replace the hard drive, it's time for that anyway. I have the old hard drive connected to another computer as a second drive. I can see the file structure on the drive, but I can't see the files and folders in My Documents for my old profile. How can I access those files adn copy them to the good drive?
i am getting a Boot Failure message on my computer when I start it up. It seems like it is trying to boot from the various devices, Then I receive the Boot Failure message.
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
Today I tried to access my System Information and came across a problem which said It could not access the Windows Management Instrumentation software. Can someone help me repair this since I really want this fixed.
System boots fine to XP PRO. When I try and access files on C: drive ( OS is on F: drive), I get an error that the HARD DRIVE IS NOT FORMATED? I cannot access any file on C: drive at all. I tried running DEFRAG on this drive and get an error about 2 files that non readable, etc. How can I access the drive to delete the files, I tried SAFE MODE but same problem. Norton shows no virus?
i rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
