i have the prob that the windows xp setup don't find my hard disk and all that. i know that i need to make a floopy disk with the drivers from the disc of the motherboard but how i can know what the correct ones?i have the hard disk ps5800-vm of asus and when i open it i have the "drivers" folder than i chose raid than in the folder Floppy Image.
View 6 Replies
I have this PC and the current HD has a virus on it, so I am trying to format with a new copy of Windows XP SP1. The hard drive is an IDE and the jumper is set on CS. But when it goes to install Windows, it tells me "Setup did not find any hard disk drives installed" I thought this was a problem with SATA Hds???? It's a built PC, the motherboard is a ASUS P5GD1-VM
View 15 Replies View RelatedI am attempting to get into my Dell Dimension 8400. It may be I am having problems due to the SP3 update but I cannot get in to see if it is there and uninstall it. (It started going to the blue screen and I cannot do anything from any of the safe mode screens...they are just black with "safemode" in all 4 corners.) I have read up on the SP3 problems on the microsoft forums and found instruction on how to take care of it. It starts with the Recovery Console and the XPCD.
I get in there and it goes directly to "Setup loading files". When it tries to start windows I get this message: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to our computer, and that any disk related hardware configuration is correct. This may involve running a manufacturer supplied diagnostic or set up program. Setup cannot continue. To quit
startup says: 1 Logical Drives found on the host adapter. 1 Logical Drive(s) handled by BIOS This computer previously had Microsoft Small Business Server 2000 installed on it, but by the time I received it, someone had replaced the OS with Ubantu.
Dell PowerEdge 1600SC
Intel Xeon 2.4GHz
2 x 36Gb HDD
1Gb RAM
I have a Dell PC. I installed a copy of Windows Vista on it. I don't like it, so I am trying to reinstall XP Home. When I click on the cd drive the XP Home CD is in, it brings up the menu, but the "Install Windows XP" option is grayed out. I try to boot from the disk, but when it is done loading all the things and I tell it I do not want to repair, but to install, it says "setup did not find any hard disk drives installed on your computer" and makes me reboot my computer. Vista still works fine, I know the Hard Drive is working
I have a major problem with my Packard Bell iMedia D815AW home desktop. Ever since I installed a Lite-On DVD-RW into it, it started making a lot of noise (a bit like the sound of a typewriter tapping) and started crashing. I removed the DVD-RW drive, only for the problem to continue. The computer kept crashing (often showing the blue crash screen, other times showing a black 'insert floppy disk' screen, sometimes just restarting itself). Running the Windows disk check utility at start-up would not work - the computer would freeze while the disk scan occured (I tried many times). I ran disk registery programs (ie- Registry Mechanic, etc), anti-virus software, defragmentation, etc. etc. but the problem remained. Yesterday, I decided I would try reinstalling (or restoring?) Windows XP again (with the intention of fixing the problem without deleting my personal files on the computer). However, upon instertion of the disk, Windows XP claimed it could not reinstall, as the Windows version on my computer was too recent. I assumed that the reason for this was that I had installed Windows XP Serice Pack 2 and so the version was too recent for the installation disk. So, I thought I would uninstall service pack 2 and then try to reinstall Windows XP. However, while uninstalling service pack 2, the computer crashed. Since then, whenever I try to startup Windows, the computer restarts after about 30 seconds of loading. I can enter the startup screen which gives you access to entering through Safe Mode, Debugging, etc - however entering through these modes has the same problem though with the computer restarting before reaching Windows. So, I entered the computer BIOS at startup and changed it to load via CD, inserting the Windows XP disk. I tried to use the 'Recovery Console' option, however the error message "Setup did not find any hard disk drives installed in your computer" showed. It then asked me to restart the computer by hitting F3. I then tried to use the Windows install option by restarting the computer and loading the Windows XP disk, but the same "Setup did not find any hard disk drives installed in your computer" message showed. So, i cant load the computer, nor reinstall the software. I dont want to lose all the files on my computer.
View 9 Replies View RelatedI'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
I have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
View 11 Replies View RelatedMy brother has a Dell laptop that came pre-loaded with Vista. He asked me to remove it and install XP for him. I've re-installed XP on several computers but I'm stuck here.
When I boot from my XP disk, I press enter to install a new copy of XP, but then it says it cannot find a hard drive and setup cannot continue
my system crashed for no reason. when i started it back up, it was in dos with the menu of 4 boot options. hard drive, cd rom etc.. it wont boot from hard drive so i put the windows disc in and tried to boot from it. it tried to setup but it said it cant find a hard drive and to exit setup.
View 14 Replies View RelatedI changed something in setup utility, but not shur what it is that I changed. now I get this, and Secondary hard disk drive 1 not found.
View 3 Replies View RelatedI just tried to reformat and install windows XP home edition, and upon coming to the screen of "Repair" or "Install fresh copy" I received an error reporting:Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit setup, press F3.I was trying to use ubuntu but my ram wasn't high enough, so now it won't let me run windows xp again.
i am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok.
I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp.
here is image of error message.
what should i do?
http://img101.imageshack.us/my.php?i...9005582dv8.jpg
I mistakenly launched XP Setup and want to know how to stop it from progressing further. I have another XP installed on another virtual disk. Rebooting from there allowed me delete the Setup files. Or so I thought ! The main XP installation however continues to try to launch Setup. Just about whatever I do, it ends in tears. My question is how do I stop XP on this disk from thinking it has to launch Setup? I dont want to reinstall XP, as that will involve a huge amount of work to recreate my environment.
View 6 Replies View RelatedIf I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies View RelatedWhen I try to install Windows XP, it goes through the setup files (blue screen) like it's going to install and then I get a message that says "Setup Cannot Find CD-ROM Drive" blah blah blah. "Setup Cannot Continue". At this point it says to press F3 to reboot. So I remove the XP Disc and reboot. It then gives me an option of picking which system to log onto out of 3: Win Xp Media Center Edition, Win XP Media Center Edition again, or Windows XP Professional (which I've never had by the way. I have to choose the first one and it will go back to my computer. My computer has been having a lot of problems, so I just want to do a fresh install of XP and start over. I don't care if I lose anything
View 6 Replies View RelatedI am running: Windows XP Home Edition SP3 Pentium 4 2.0 ghz 512 ram ATI 8500 32.7 Gig HD Spac I keep getting error message "set up is unable to find a HD location to store temp files. Make at least 898KB available. What setting should I use and where is this setting?
View 5 Replies View RelatedI recently purchased a Western Digital laptop hard drive for my HP Presario X1015US laptop - and got the part where it said : Setup did not find any hard disk drives installed on my computer. I have tried two new drives now and it is simply not getting past this point. I have gone in to the bios to ensure it is booting from Windows Operating System CD and it is still not finding. HP told me I have to check motherboard? Is there anything else I can do or am I going to need to buy a new laptop (the old hard drive is no longer working...started making weird noise).
Iv got a Gateway MT6705 laptop with Windows Vista Pre Installed and I dont like it one bit. But when I went to install Windows XP Professional SP2 It says No hard drive found. It has 120Gb SATA hard drive installed using a Intel SATA Controller.
View 1 Replies View Relatedrunning XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
View 9 Replies View Relatedrecently bought SATA 3.0 hard disk(samsung)and i forgot if my motherboard support this hard disk,after checking it only supports 1.5 SATA.I visited samsung website on how to force my Hard disk to run at 1.5
View 8 Replies View RelatedIt is a compaq computer and when I got it there was a disk in it that soimeone eveidently tried to burn windows xp pro on but didn't do it right. The computer comes on and says it is continueing setup then wants the xp disk, but when you put it in it says it is missing all the files and I don't think this guy had a product niumber or nothing, anyway my friend got screwed. How do I take off what is already on the computer the start of xp, like by using fdisk or somethning and then I am going to put windows 98 on the computer for him.I want to no how to wipe it all off and start over to put the windows 98 on.
View 12 Replies View RelatedI have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedIt says that TOTAL SIZE = 39 GB And Free Space = 5 GB Which means that the size of all files on C is 34 GB But when I select all files including Hidden files and Right Click> Properties, its size of all files is only 27 GB.I did clear recycle bin and disk defragmenter C, but still the same. So why is that?
View 4 Replies View RelatedI'm formatting my hard drive and re-installing XP, and I'm wondering if I can delete the system partition without any adverse effects to the system. When I try to delete it from the XP Setup disk, it warns me not to do it, but I'm trying to create a larger partition for the system. Can I delete the system partition and create a new one.
View 3 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedI have a Dell XPS 400 and I'm running off of a 500 gb barracuda harddrive. Here's my problem. When I try to boot up my computer I got the following error a second or two after the windows logo shows up "A Problem has been detected and windows has shut down to prevent damage to your computer." The error code is STOP: 0x00000024 (0x00190203,0x85D97A98, 0xC0000102, 0x00000000) When I insert my windows disc, I get the following error "Setup did not find any hard disk drives installed in your computer". I searched online and attempted to integrate my harddrive drivers onto my windows disc. This is the source from which I got my drivers http://support.dell.com/support/down...&fileid=173456. I then proceed to use a program called Nlite to create a new windows disc, and burnt that disc using a program called imgburner. When I use that disc and press F6 during set up I get the following message "Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter.
View 14 Replies View Relatedif someone could tell me how to format windows xp home edition from the bios and not using the xp disk. I have already tried right clicking on drive c and selecting format but the message says windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no window is displaying the contents of the drive. Then try formatting again.
So I closed all open programs that I could but still no luck. Then I tried the format from running the run command and typing format c:but I get this message format cannot run because the volume is in use by another process. Format can run if this volume is dismounted first. All open handles to this volume would then be invalid. would you like to force a dismount on this volume? (y/n) so I type y for yes and hit enter then nothing
I upgraded my server, basically all I kept was the two hard drives from the old machine. The one hard drive is for the system files (~13GB) and the other is for storage, user files, etc (~160GB). I figured that then I reinstalled Windows 2000 Server on the System disk, I would just have to assign the other disk a drive letter and be on my way. Instead, in the disk management console, I get "Disk 1 [the 160GB) Dynamic Unreadable" I can revert to a basic disk, but it says I will lose all my information. It is imperative that the data on this disk be recovered.
View 5 Replies View RelatedMy computer was missing a system file after restarting one day. I inserted winxp disk to repair I would boot from it but the setup would wouldn't ever load anything. I reformatted with the Seagate disk and tried a different winxp disk to install same thing, it hangs at asking for third party adapter software. Any ideas?
Winxp, 160gig SATA seagate, 1gig of ram biostar mobo. It all worked fine until I lost that file now I cant even reload windows!
