When I try to install Windows XP, it goes through the setup files (blue screen) like it's going to install and then I get a message that says "Setup Cannot Find CD-ROM Drive" blah blah blah. "Setup Cannot Continue". At this point it says to press F3 to reboot. So I remove the XP Disc and reboot. It then gives me an option of picking which system to log onto out of 3: Win Xp Media Center Edition, Win XP Media Center Edition again, or Windows XP Professional (which I've never had by the way. I have to choose the first one and it will go back to my computer. My computer has been having a lot of problems, so I just want to do a fresh install of XP and start over. I don't care if I lose anything
i am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok. I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp. here is image of error message. what should i do?
I am running: Windows XP Home Edition SP3 Pentium 4 2.0 ghz 512 ram ATI 8500 32.7 Gig HD Spac I keep getting error message "set up is unable to find a HD location to store temp files. Make at least 898KB available. What setting should I use and where is this setting?
i have the prob that the windows xp setup don't find my hard disk and all that. i know that i need to make a floopy disk with the drivers from the disc of the motherboard but how i can know what the correct ones?i have the hard disk ps5800-vm of asus and when i open it i have the "drivers" folder than i chose raid than in the folder Floppy Image.
I recently purchased a Western Digital laptop hard drive for my HP Presario X1015US laptop - and got the part where it said : Setup did not find any hard disk drives installed on my computer. I have tried two new drives now and it is simply not getting past this point. I have gone in to the bios to ensure it is booting from Windows Operating System CD and it is still not finding. HP told me I have to check motherboard? Is there anything else I can do or am I going to need to buy a new laptop (the old hard drive is no longer working...started making weird noise).
Iv got a Gateway MT6705 laptop with Windows Vista Pre Installed and I dont like it one bit. But when I went to install Windows XP Professional SP2 It says No hard drive found. It has 120Gb SATA hard drive installed using a Intel SATA Controller.
I have this PC and the current HD has a virus on it, so I am trying to format with a new copy of Windows XP SP1. The hard drive is an IDE and the jumper is set on CS. But when it goes to install Windows, it tells me "Setup did not find any hard disk drives installed" I thought this was a problem with SATA Hds???? It's a built PC, the motherboard is a ASUS P5GD1-VM
I am attempting to get into my Dell Dimension 8400. It may be I am having problems due to the SP3 update but I cannot get in to see if it is there and uninstall it. (It started going to the blue screen and I cannot do anything from any of the safe mode screens...they are just black with "safemode" in all 4 corners.) I have read up on the SP3 problems on the microsoft forums and found instruction on how to take care of it. It starts with the Recovery Console and the XPCD.
I get in there and it goes directly to "Setup loading files". When it tries to start windows I get this message: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to our computer, and that any disk related hardware configuration is correct. This may involve running a manufacturer supplied diagnostic or set up program. Setup cannot continue. To quit
startup says: 1 Logical Drives found on the host adapter. 1 Logical Drive(s) handled by BIOS This computer previously had Microsoft Small Business Server 2000 installed on it, but by the time I received it, someone had replaced the OS with Ubantu.
I have a Dell PC. I installed a copy of Windows Vista on it. I don't like it, so I am trying to reinstall XP Home. When I click on the cd drive the XP Home CD is in, it brings up the menu, but the "Install Windows XP" option is grayed out. I try to boot from the disk, but when it is done loading all the things and I tell it I do not want to repair, but to install, it says "setup did not find any hard disk drives installed on your computer" and makes me reboot my computer. Vista still works fine, I know the Hard Drive is working
I have just purchased a Campaq Presario laptop v3607TU. It came with only "FreeDos" installed. If I boot up, it goes to the c prompt, and I can see call the directories on the hard drive. inserted my Windows XP bootable disk into the CD/DVD slot, and restarted. It booted from the CD, and the setup files begin to be read. Then I get a message that says, Setup cannot find any hard drives on your computer. The only option is F3 QUIT.
I have a major problem with my Packard Bell iMedia D815AW home desktop. Ever since I installed a Lite-On DVD-RW into it, it started making a lot of noise (a bit like the sound of a typewriter tapping) and started crashing. I removed the DVD-RW drive, only for the problem to continue. The computer kept crashing (often showing the blue crash screen, other times showing a black 'insert floppy disk' screen, sometimes just restarting itself). Running the Windows disk check utility at start-up would not work - the computer would freeze while the disk scan occured (I tried many times). I ran disk registery programs (ie- Registry Mechanic, etc), anti-virus software, defragmentation, etc. etc. but the problem remained. Yesterday, I decided I would try reinstalling (or restoring?) Windows XP again (with the intention of fixing the problem without deleting my personal files on the computer). However, upon instertion of the disk, Windows XP claimed it could not reinstall, as the Windows version on my computer was too recent. I assumed that the reason for this was that I had installed Windows XP Serice Pack 2 and so the version was too recent for the installation disk. So, I thought I would uninstall service pack 2 and then try to reinstall Windows XP. However, while uninstalling service pack 2, the computer crashed. Since then, whenever I try to startup Windows, the computer restarts after about 30 seconds of loading. I can enter the startup screen which gives you access to entering through Safe Mode, Debugging, etc - however entering through these modes has the same problem though with the computer restarting before reaching Windows. So, I entered the computer BIOS at startup and changed it to load via CD, inserting the Windows XP disk. I tried to use the 'Recovery Console' option, however the error message "Setup did not find any hard disk drives installed in your computer" showed. It then asked me to restart the computer by hitting F3. I then tried to use the Windows install option by restarting the computer and loading the Windows XP disk, but the same "Setup did not find any hard disk drives installed in your computer" message showed. So, i cant load the computer, nor reinstall the software. I dont want to lose all the files on my computer.
running XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
My brother has a Dell laptop that came pre-loaded with Vista. He asked me to remove it and install XP for him. I've re-installed XP on several computers but I'm stuck here.
When I boot from my XP disk, I press enter to install a new copy of XP, but then it says it cannot find a hard drive and setup cannot continue
I'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
my system crashed for no reason. when i started it back up, it was in dos with the menu of 4 boot options. hard drive, cd rom etc.. it wont boot from hard drive so i put the windows disc in and tried to boot from it. it tried to setup but it said it cant find a hard drive and to exit setup.
Recently I've been trying to install XP SP2 on a system that was recovered using an XP upgrade disc that only had SP1. The setup program gets through backing up, creating a restore point and so on, but during the actual file installation process, an error causes setup to abort and undo all changes made (rollback). "Service Pack 2 Setup Error." is the title bar, and "The system cannot find the path specified." is the message, the only option is to click ok, which opens the XP SP2 uninstall wizard. I've tried using Subinacl to reset security settings, tried installing in both safe and normal modes, used chkdsk /r and /p and tried installing again, and each time got the same message.
I've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could cause the problem.
I started an upgrade for xp pro part way through the install I got a message "WatchDriverSigningPolicy.exe" no found I pressed enter then got another message "fake setup call himself instead original "setup.exe" ; setup abort!" now each time I reboot it starts to load xp then gives me the same message then press enter it then reboots.
I mistakenly launched XP Setup and want to know how to stop it from progressing further. I have another XP installed on another virtual disk. Rebooting from there allowed me delete the Setup files. Or so I thought ! The main XP installation however continues to try to launch Setup. Just about whatever I do, it ends in tears. My question is how do I stop XP on this disk from thinking it has to launch Setup? I dont want to reinstall XP, as that will involve a huge amount of work to recreate my environment.
I was told to reinstall windows 2000 aon a C800 I was given. I stopped with an erroro reading line 3221166496 hivedef.inf corrupted. Setup cannot continue.
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
I dropped my laptop the other day. It kept working at first, but crashed a couple of hours later. Now, when I boot-up, I get the following error message:"Windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys. You can attempt to repari this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair."I've inserted the setup CD (in an external CD-Rom drive, since my laptop doesn't have its own drive). But for some reason, setup won't start, and I keep coming back to the above error message. How do I start setup?
I have Windows XP Home, I loaded a cd burn program that trashed my system. I tried to do a repair of XP with the recovery console on my installation cd. It came up with a need for an "asms" file, which is in my I386 folder. But setup refuses to load it. So I cancelled out but setup continues to load every time I boot up even without the cd in place. How can escape from setup? My ultimate goal is to get into safe mode for a system restore.
I am trying to do a desktop installation of a software program that is located on our server. The desktop installation is located in a folder on the network drive. When I get to the file, setup.exe, I double click on it but nothing happens. It does go into "processes" in the task manager. It lists memory usage, but no cpu is used.I installed this desktop on 24 other computers with no problem. This is the only one with this problem. Why? What can I do to get this to run?
I hooked up a friend's HD (to my computer) to install his version of Windows XP on his HD b/c his computer was having hardware-related startup problems we were in the process of fixing. In doing so, Windows XP installed setup files on MY HD. I run Win XP PRO. Not Home Ed., which is what we installed on his HD b/c that's what he had. The installation of Win Xp Home Ed went well and his computer is running fine now.Anyway, so now I have Win XP Home Ed setup files on my comp, in addition to my Win Xp Pro. Every time I restart my computer, it gives me the option of running Pro or Win Xp Setup. Not really a major biggy since I can just choose pro and go on to start my comp regularly. However, if I wanted to get rid of that and get those XP Home Ed Setup files off my computer, how would I go about it?
After doing a fdisk and repartioning my hard drive I put in the WIN XP CD to reinstall the OS. It goes to the blue screen that says WINDOWS SETUP. On the bottom task bar it says Windows is loading setup. It's not loading at all. It hangs there and I have to reboot and it does it again. I havae changed hard drives and memory sticks and the same problem.
I had a botched setup of Visual C++ 6.0 a few weeks ago. Apparentlythere are still traces on my system. Whenever a user logs in Windowscomplains it can't find a visual C++ file. Spybot also catches it trying to change the registry. I have tried everything I can think of and cannnot remove whatever is left of it. I've deleted every file and registry entry assosicated with VC++ 6, checked msconfig, startup folders, and even ran a registry cleaner. Still cannot find where this pest is hiding.
