I bought a new hard drive and loaded XP Pro on it (2 partitions), file system NTFS on both. I hung my drive from Win 2000 Pro, NTFS, as the slave. Disk management sees the drive but will not allow me to access the drive. The drive is displayed as "Healthy" but when I attempt to access the drive, it says the drive must be formatted. I have tons of data I need on that hard drive.
View 2 Replies
I have gont ot XP fro 2000 and had my 2 Maxtor slave drives on a SI l680 ATA 133 controler card. I was unable to get XP to load with the card so I removed it and after replacing it the drives do not show up. They are in the Bios and the driver for the card is in and working corectly. I took one off and made it a secondary on the to the boot and they still are gone.
View 1 Replies View RelatedI just installed Windows Xp on a brand new HDD. The previous hard drive had Windows 2000, and since I didn't want to lose any files I installed that drive as the slave. But when I boot the machine up. And select the slave drive, none of the files, such as pictures, word docs, etc. are there. The folders are blank. The jumper pin setting is correct because the picture is right on the label for the drive
View 5 Replies View RelatedI've long made good use of the ability to search for files in my computer running Windows XP Professional by providing the Search Companion with "All or part of the file" or "A word or phrase in the file," but the Search Companion has suddenly begun behaving strangely. Sometimes when I run a search now it claims it found no files at all matching my criteria even though I know such files exist, and other times it lists some or all of the files it found multiple times (yes, with multiple listings of a single file within a single folder). And when it says it found results now, too, some of the files it lists appear in blue rather than the customary black.
View 6 Replies View RelatedIve been told that the monthly tool doesn report if it finds OR removes anything is this true
View 1 Replies View RelatedA friend of mine needs win 2000 Pro boot discs. I don't think this is illegal as a microsoft site says if you have problems to make from a friends. He is the only person I know who has it. Need the discs to access his system. Probably infected. Cant get it to start, shutdown, nothing. Sometimes monitor says no signal. Sometimes works. Checked wires. Put in an old spare video adapter card, starts to work fine but freezes before I can do anything. I do not have a floppy drive so I need to be able to burn them to a CD.
View 6 Replies View RelatedIm installing a brand new pc and I just downloaded all the latest fixes and patches for the OS and the Browser.except one, KB890923. Everytime I try to launch through Windows Update it says it cant do it. SO I attempted to download and run it manually and it states that the program is not a valid Win32 application.
View 1 Replies View RelatedAm I right in thinking that they are both pretty similar except that server has support for multiple processors and extra network related tools and facilities. The reason I ask is that if a piece of software works on Windows 2000 server, is it extremely likely that it will work on Windows 2000 professional too? As a bit of background information: I work for a small company which supplies temperature monitoring equipment which needs to be networked. I've been told that it has been tested on Windows 2000 server but not on Window 2000 professional.
View 1 Replies View RelatedProblem with XP pro finding slave drive, I installed a 200 Gig maxtor drive set up as a slave funny thing it see's the drive in defrag but it does not see it in My Computer or Explorer, I have uninstalled it and installed it 2 or 3 times and when I do it installs the Maxtor slave back and even say's your new hardware is installed and ready to use but you can't see it except in defrag now that is a new one for me.
View 4 Replies View RelatedI need to know if I can take a drive out of my friend's tower, and put it in my tower as a slave drive to format it, will it be a bootable drive back in my friend's tower? Or will it still read as a slave drive with no OS files? I have to do this because my friend lost his Win XP Pro SP1 disk, and all I have is a Win XP Pro disk with no SP on it, I have a separate downloaded SP1 file, but if I try to use that, it will chop their harddrive from 200 gigs down to 130'ish, like it did with my 160 gig drive Or maybe I could create a new Windows install CD with SP1 on it already.
View 2 Replies View RelatedHow do I format a slave drive in XP?
View 7 Replies View RelatedI am using Windows XP. Everytime I start up I get the following error:Pri Slave HDD Error - Press F1 to resume.
View 7 Replies View RelatedI have a new Western Digital 120 GB hard drive that I have slaved. I have formatted this drive in Windows XP. When I boot up sometimes the second drive is not there (D: Drive I go to: Control Panel System Hardware Device Manager Disk DrivesScan for hardware changes Once I do this the drive appears and is accessible, but the drive is very slow to copy data.
View 3 Replies View RelatedHad to replace the hard drive in my desktop and installed SP3. No problems yet. Any ideas on how I may be able to pull my files off the old drive? Can't get into it from My Computer although it does show up and shows there is data on the drive.
View 2 Replies View RelatedI want to install a second disk to my PC, but I am not sure what the "exact" way to do as I heard something like "master/slave", setting jumper, etc. Can anyone guide me the installation?
View 4 Replies View RelatedI bought a new maxtor 250 gig hd and set it to be master drive C. I had a 80gig hd that came with my dell. I set it to slave drive E for storage reformatted it clean. For some reason on restart or bootup chkdsk runs on drive E. Finds no problems. Never has. I am running xp home sp2
View 3 Replies View RelatedI'm currently running windows XP Pro on one Hard drive. I also have second hard drive which has some data in it but not plug in to my system right now. Is it possible that i can plug in my second hard drive as slave (by jumper setting) without turning off my computer, and beable to see and transfer data from my second hard drive to my first hard drive. Is it safe and possible to do that?
View 10 Replies View RelatedI have an athalon 1200 on an asus a7a266 OS Winxp SP2 512mb onboard. Last year I replaced the main drive after four years of use with a Western Digital drive. recently on boot up, the system can no longer detect either the primary master or the primary slave drives. It does se the secondary slave as my Lite-On DVDRW SOHW-812s. Other than the master drive going away,(hopefully not) Is there any suggestions on what may have happened? The Asus MBO is 5 years old by the way.
View 7 Replies View RelatedShe finally informed me today that when she installed XP (upgrade cd) to her W98SE system, that she now only has 400MB left on the drive because she started off with only a 6GB drive (I built the system years ago and that's all she needed at that time and since until XP). She just bought a new 200GB WD drive but wants to copy her current drive to the new one rather than start from scratch. Since I'm not there with 'hands on' and this lunatic is the one who will be doing this while I'm on the phone with her, I need to know if the WD cd is bootable or do I have her hook up the drive in a slave position, get to the desktop, and then prepare the drive with the cd at that point AND then be able to copy the current drive to the new one from within windows?
If the WD cd is bootable, I'm assuming the onscreen instructions will give options to format the drive and then copy it, right? I've never used the harddrive tools for any of this, but don't want to walk her through how I normally do this as I'll end up early in the game going the same route as the movie Ya-Ya Sisterhood and be banging the phone on the desktop. She's already argued with me when I told her she didn't have to jumper the drive as a slave with the new cable that came with the drive.....because she's reading the freaking instructions (the very ones she never understands in the first place, but she knows better when I'm not right in her face and within arm's reach)
I have an 160 Gb wD hardrive set to master on my Asus P4p800e deluxe mother.....I would like to know If I could add an extra hardrive sata as a slave...The reason for this is becuase I want to keep diffrent files in here...But I don' know id this could be done...Do I need to dual Boot and install the same Operating system in the Sata...I know my motherboard supports sata Ide and Raid disks...and if its not possible ...Can you tell me another way to add a second drive without dual booting,...I just want my drive to appear in my computer so I could save different files
View 8 Replies View RelatedI am running XP Pro on a rebuilt Dell PIII. The original hard drive is 7G, so I added a 300G slave for storage. My plan now was to change the 300G drive to the Master drive. I reformatted, booted from my XP disc & installed the OS on the "new" 300G drive. Then I switched the jumper & cable so it was in the master position.and nothing.
It starts up, tells me to hit F2 for setup or F1 to continue. When I hit F1, it goes to a blank screen with flashing cursor, but no command line
My computer came down with a nasty virus that I didn't want to deal with anymore, all the computer would do was constantly reboot, could never get to log-in. So I bought a new HD (which I really wanted anyway ) with intentions of loading new OS on the new drive and using the old drive as a slave, and after copying all the files I needed off the old drive I was going to reformat it for storage. Everything worked out fine except on the old drive I had a separate password protected admin login named Billybob where I kept all my important work files. I also used the sharing and security function to protect Billybob from access from other users. Now I can't access the files myself. I can only access the files that were in the 'Guest' profile that wasn't password protected. When I click on or try to move the files in Billybob I get the 'access denied' message. I used the HD utility program that came with my new HD and it allowed me to actually move the files on to the new HD but the files are still protected when I try to open them. Any help on this would be REALLY appreciated as I have over a years worth of technical work stuff in Billybob that I will never be able to replace.
View 2 Replies View RelatedI was messing with partitioning my hard drive. Nothing challenging, but it seemed to work. But then partition magic said the entire drive was "BAD" and had no partitions, knowing full well it had four.
My computer still worked. Then it would get to where it was restarting on its own for no reason. Then sometimes the bios recognized the master and the slave drive and loaded, but most of the time it didn't recognize either, and wouldn't load. Sometimes it just recognized one drive.
I had thought maybe the MBR was messed up. But then why wouldn't the bios recognize the drives every time. And if one drive was messed up, that wouldn't effect the bios would it
I got my master disk crashed and now I have replaced the disk and installed the new WinXP.How can I connect the old crashed master disk back to the bus and installed
as the slave disk.I guess the old disk is not crashed seriously and I am trying to recover some of the data.I have tried to connect the old crashed disk to the slave position and have the jumper setting correct.However, the BIOS does not detect both of them and complains cannot find any OS.
I've upgraded my PC from Win98SE to XP, and installed a second HD (as a slave) using an old Samsung SV3002H i had laying about. Bios detects it, and it shows in my device manager, but aside from that, i can't access it to either format it/see it in "my computer."
View 3 Replies View RelatedMultiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
I used Regseeker *sigh* and now my slave drive is not detected. It does not show up in the device manager list. What may I have removed to cause this? I think Regseeker backed up the registry files I deleted. I tried to restore the files and received an error...
If any more details are needed let me know.
I installed Windows Vista on a slave drive of a computer which has Windows XP as its master drive. I have now taken out the har ddrive with Windows Vista on it, but it still gives me the choice of booting from either Windows XP or Windows Vista.I edited the Boot.ini file, but it didn't have Windows Vista listed as a bootable option, so I left the Boot.ini file alone. It currently looks like this:;
;Warning: Boot.ini is used on Windows XP and earlier operating systems.;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.
I'd like to install my old hard drive as a slave drive on new computer but there's no middle connector on IDE cable and I can't get new IDE 'till Monday. Is it possible to connect it to Dvd drive? Sorry if this topic shouldn't be here (seeing how it's hardware question), but I'm using XP and thought someone could help.
View 6 Replies View RelatedHow do I most efficiently and with the least chance of data loss salvage the data from the partitioned hard drive? By using the enclosure or by hooking the drive up to the old box as a slave? And is the remaining OS on C: of the partitioned drive likely to cause any problems
View 4 Replies View RelatedI have seen this messge twice. Once on a friends PC and just now on mine. My computer has been running for maybe... 3 days straight now. I turned it off for about 3 hours to keep my room cool. I turned it back on an heard "beep...beep...beep...beep" (the same beep you hear if the ram isn't snapped in the socket all the way) and at the boot up it said "Primary slave hard disk fail" XP would not start. So i hit the reset button, same thing, hit it again, same thing. Powered off and powered back on and it started up fine.
View 1 Replies View Related
