Hook Up The Drive In Slave Position
Feb 26, 2006
She finally informed me today that when she installed XP (upgrade cd) to her W98SE system, that she now only has 400MB left on the drive because she started off with only a 6GB drive (I built the system years ago and that's all she needed at that time and since until XP). She just bought a new 200GB WD drive but wants to copy her current drive to the new one rather than start from scratch. Since I'm not there with 'hands on' and this lunatic is the one who will be doing this while I'm on the phone with her, I need to know if the WD cd is bootable or do I have her hook up the drive in a slave position, get to the desktop, and then prepare the drive with the cd at that point AND then be able to copy the current drive to the new one from within windows?
If the WD cd is bootable, I'm assuming the onscreen instructions will give options to format the drive and then copy it, right? I've never used the harddrive tools for any of this, but don't want to walk her through how I normally do this as I'll end up early in the game going the same route as the movie Ya-Ya Sisterhood and be banging the phone on the desktop. She's already argued with me when I told her she didn't have to jumper the drive as a slave with the new cable that came with the drive.....because she's reading the freaking instructions (the very ones she never understands in the first place, but she knows better when I'm not right in her face and within arm's reach)
View 12 Replies
ADVERTISEMENT
Feb 21, 2005
I just installed Windows Xp on a brand new HDD. The previous hard drive had Windows 2000, and since I didn't want to lose any files I installed that drive as the slave. But when I boot the machine up. And select the slave drive, none of the files, such as pictures, word docs, etc. are there. The folders are blank. The jumper pin setting is correct because the picture is right on the label for the drive
View 5 Replies
View Related
Apr 1, 2010
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies
View Related
Jul 31, 2005
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies
View Related
Sep 29, 2007
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies
View Related
Mar 12, 2007
I just got a new 300 GB Seagate internal hard drive installed after running out of space on my 40 GB one. I need to know how to move stuff off the 40 GB master drive to my 300 GB slave drive. I'm using Windows XP.
View 14 Replies
View Related
Jan 31, 2006
Problem with XP pro finding slave drive, I installed a 200 Gig maxtor drive set up as a slave funny thing it see's the drive in defrag but it does not see it in My Computer or Explorer, I have uninstalled it and installed it 2 or 3 times and when I do it installs the Maxtor slave back and even say's your new hardware is installed and ready to use but you can't see it except in defrag now that is a new one for me.
View 4 Replies
View Related
Sep 10, 2005
I need to know if I can take a drive out of my friend's tower, and put it in my tower as a slave drive to format it, will it be a bootable drive back in my friend's tower? Or will it still read as a slave drive with no OS files? I have to do this because my friend lost his Win XP Pro SP1 disk, and all I have is a Win XP Pro disk with no SP on it, I have a separate downloaded SP1 file, but if I try to use that, it will chop their harddrive from 200 gigs down to 130'ish, like it did with my 160 gig drive Or maybe I could create a new Windows install CD with SP1 on it already.
View 2 Replies
View Related
Jun 7, 2005
I have a new Western Digital 120 GB hard drive that I have slaved. I have formatted this drive in Windows XP. When I boot up sometimes the second drive is not there (D: Drive I go to: Control Panel System Hardware Device Manager Disk DrivesScan for hardware changes Once I do this the drive appears and is accessible, but the drive is very slow to copy data.
View 3 Replies
View Related
May 25, 2008
Had to replace the hard drive in my desktop and installed SP3. No problems yet. Any ideas on how I may be able to pull my files off the old drive? Can't get into it from My Computer although it does show up and shows there is data on the drive.
View 2 Replies
View Related
Aug 22, 2005
I'm currently running windows XP Pro on one Hard drive. I also have second hard drive which has some data in it but not plug in to my system right now. Is it possible that i can plug in my second hard drive as slave (by jumper setting) without turning off my computer, and beable to see and transfer data from my second hard drive to my first hard drive. Is it safe and possible to do that?
View 10 Replies
View Related
Nov 26, 2004
I have an 160 Gb wD hardrive set to master on my Asus P4p800e deluxe mother.....I would like to know If I could add an extra hardrive sata as a slave...The reason for this is becuase I want to keep diffrent files in here...But I don' know id this could be done...Do I need to dual Boot and install the same Operating system in the Sata...I know my motherboard supports sata Ide and Raid disks...and if its not possible ...Can you tell me another way to add a second drive without dual booting,...I just want my drive to appear in my computer so I could save different files
View 8 Replies
View Related
Mar 26, 2007
I am running XP Pro on a rebuilt Dell PIII. The original hard drive is 7G, so I added a 300G slave for storage. My plan now was to change the 300G drive to the Master drive. I reformatted, booted from my XP disc & installed the OS on the "new" 300G drive. Then I switched the jumper & cable so it was in the master position.and nothing.
It starts up, tells me to hit F2 for setup or F1 to continue. When I hit F1, it goes to a blank screen with flashing cursor, but no command line
View 9 Replies
View Related
Oct 30, 2006
My computer came down with a nasty virus that I didn't want to deal with anymore, all the computer would do was constantly reboot, could never get to log-in. So I bought a new HD (which I really wanted anyway ) with intentions of loading new OS on the new drive and using the old drive as a slave, and after copying all the files I needed off the old drive I was going to reformat it for storage. Everything worked out fine except on the old drive I had a separate password protected admin login named Billybob where I kept all my important work files. I also used the sharing and security function to protect Billybob from access from other users. Now I can't access the files myself. I can only access the files that were in the 'Guest' profile that wasn't password protected. When I click on or try to move the files in Billybob I get the 'access denied' message. I used the HD utility program that came with my new HD and it allowed me to actually move the files on to the new HD but the files are still protected when I try to open them. Any help on this would be REALLY appreciated as I have over a years worth of technical work stuff in Billybob that I will never be able to replace.
View 2 Replies
View Related
Apr 2, 2007
I was messing with partitioning my hard drive. Nothing challenging, but it seemed to work. But then partition magic said the entire drive was "BAD" and had no partitions, knowing full well it had four.
My computer still worked. Then it would get to where it was restarting on its own for no reason. Then sometimes the bios recognized the master and the slave drive and loaded, but most of the time it didn't recognize either, and wouldn't load. Sometimes it just recognized one drive.
I had thought maybe the MBR was messed up. But then why wouldn't the bios recognize the drives every time. And if one drive was messed up, that wouldn't effect the bios would it
View 1 Replies
View Related
Jan 12, 2005
I've upgraded my PC from Win98SE to XP, and installed a second HD (as a slave) using an old Samsung SV3002H i had laying about. Bios detects it, and it shows in my device manager, but aside from that, i can't access it to either format it/see it in "my computer."
View 3 Replies
View Related
Jun 21, 2007
Multiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
View 7 Replies
View Related
Jul 7, 2008
I used Regseeker *sigh* and now my slave drive is not detected. It does not show up in the device manager list. What may I have removed to cause this? I think Regseeker backed up the registry files I deleted. I tried to restore the files and received an error...
If any more details are needed let me know.
View 1 Replies
View Related
Dec 24, 2008
I installed Windows Vista on a slave drive of a computer which has Windows XP as its master drive. I have now taken out the har ddrive with Windows Vista on it, but it still gives me the choice of booting from either Windows XP or Windows Vista.I edited the Boot.ini file, but it didn't have Windows Vista listed as a bootable option, so I left the Boot.ini file alone. It currently looks like this:;
;Warning: Boot.ini is used on Windows XP and earlier operating systems.;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.
View 4 Replies
View Related
Aug 12, 2005
I'd like to install my old hard drive as a slave drive on new computer but there's no middle connector on IDE cable and I can't get new IDE 'till Monday. Is it possible to connect it to Dvd drive? Sorry if this topic shouldn't be here (seeing how it's hardware question), but I'm using XP and thought someone could help.
View 6 Replies
View Related
Mar 23, 2008
How do I most efficiently and with the least chance of data loss salvage the data from the partitioned hard drive? By using the enclosure or by hooking the drive up to the old box as a slave? And is the remaining OS on C: of the partitioned drive likely to cause any problems
View 4 Replies
View Related
Mar 9, 2005
I had an NTDLR error, so I thought I could make my corrupted hard drive a slave on another computer so I could just get my stuff that way. Unfortunately when Windows XP started, it started checking the newly added slave and it took forever and started doing all this stuff, all I remember seeing is...deleting index entry yatta yatta. I don't know what it did!! But when I got into windows, all that was there what was originally on the root drive (c:/) like unzipped, My Shared Folder, and WINDOWS. NO MY DOCUMENTS, nothing..no way to even get to my user files with my favorites, documents etc. Yet, in the disk information when I right click it says the drive is occupied with the same amount as before - 80 gigs. I tried to defrag too and the files that I can't find otherwise were being defragmented! So how can I access these files? Windows xp recovery said it could not be fixed. I need this stuff, is there any other way to get it!? It's NTFS file format.
View 11 Replies
View Related
Dec 18, 2008
I have a windows XP that used to be an ME and it hasn't been hooked up to the internet sense AOL came out pretty much and i decided to try and put some use to it and hook some internet to it and put anti-virus and all that good stuff on it but when i try's it said it was on there and it really wasn't and i have many problems with it know.Full Coverage and its got stuff like Virus Trigger and a few other things.its very slow its very hard to run Any programs and i tried to get rid of it but i can't seem too.
View 8 Replies
View Related
Sep 19, 2008
I've "always" had problems with using devices on my computer (XP). When I tried to hook up my camcorder I got a blue screen of death, and in the end no matter what I tried, as soon as I tried to stream my video it froze so badly the machine had to be turned off at the wall, and left to recover. I don't remember what the blue screen code was at that time, as I assumed it was a one-off. However, I now like to keep in touch with friends and family in New Zealand using a webcam. Now, I had freezing and crashing using Messenger, so I now use Camfrog, which has been fine up until yesterday, well, actually, not fine, sometimes it would crash when I put in the camera password (to activate the webcam), but mostly it would work.
So .......... yesterday, it started playing up real badly. I had to reboot (after turning the pc off at the wall) five times! Now it doesn't even give me the chance to put in the password just gives me this: (put a ? in by the UGCODE, cause I couldn't quite read what that symbol was [screen cuts off], but from googling I think its a "b"...
View 5 Replies
View Related
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Jun 21, 2005
Is there a way (short of editing the registry) to configure the desktop background so that an image occupies only a portion of the screen other than the center. I would liike to place a personal photo in, say, the right upper quadrant of the screen and leave the rest of the screen a simple solid color?
View 6 Replies
View Related
Sep 28, 2006
I have a "Forums Folder" on my desktop.When I click on it it opens in a minimized position. I stretch it by the edges to full screen and all is fine.When I click on any of the shortcuts in that folder they sometimes open in a minimized position.I stretch again.The next time I go to open it, I have to do it all over again.
View 4 Replies
View Related
Jul 5, 2010
My computer screen is upside down, how can i turn it back ito original position?
View 1 Replies
View Related
Oct 2, 2009
The 'browse' and 'position' buttons in the desktop tag under display properties, have become Gray! now i cant 'stretch' or 'center' my wallpapers, nor can i change the wallpapers from there.
View 2 Replies
View Related
Nov 20, 2006
I want to know if there is possible to put a specific text over the desktop and when the user change the wallpaper the text continues appearing at the same position (basically I want to do it on Windows XP).People says that an image worth more than thousands of words... Ok this is a screenshot of what I want to do
View 10 Replies
View Related
Mar 12, 2005
How do I format a slave drive in XP?
View 7 Replies
View Related
