When I unplug my laptop the battery shows at 100%. After 5 minutes, it goes into standy. If I take the force standby when battery is low option off, some interesting stuff happen:Battery goes from 100% to 2% after 5 minutes Battery lasts for around a hour XP keeps giving errors that the battery is low.So why is XP freaking out about my battery after 5 minutes when it has a hour of battery life. It's getting annoying and I'm so confused.
View 7 Repliesnot sure how, but i've lost most of the power settings. And, they don't stay when i save them from the gui. So, can someone help with setting the correct config to get my settings back? I've done 'Repair' from boot and have tried Run> sfc /scannow. Neuther has correct the issue. I'd REALLY rather not do a clean install, but it is looking like the product is just so inherently unstable that i have no choice.
View 2 Replies View RelatedMy custom settings in power management seem to have reset to default(monitor power off after 15 min, etc.). I set them to my own settings but after I restart my computer the settings go back to default. Does anyone know why this might happen? Could it be that I deleted a windows registry key?
View 8 Replies View RelatedI recently changed my power settings so my monitor would go off after 1 minute while running some scans. Now when I try to change that setting to always on or any other setting, my monitor keeps going black after 1 minute of not being used. Any ideas as to how I can change this?
View 2 Replies View RelatedThis is a new Dell P4 processor 630w/HT technology 3.0 GHz, 1 GB DDR2 SDRAM @ 400MHz,160 GB, XP Pro 256 MB ATI DVI Vidio. The system will not start the screensaver or any of the power saving settings. Dell is no help at all.
View 23 Replies View Relatedfor some reason my screen saver does not come on and my screen does not turn off. for testing purposes i changed the screen saver to 1 min and changed the power setting for the lcd monitor to turn off after 2 min. i waited for like an hour but the lcd is still on and the screen saver has not come on. this is on a dell e1505 laptop. it worked before.
View 2 Replies View RelatedI've changed the settings under power management so when i press the power button or close the lid the laptop should hibernate. When i do either of these the screen just stays on preparing to hibernate.really annoying cos i have then have to restart my laptop.
View 4 Replies View RelatedRunning WinXP Pro SP2 on an Intel D865GBFL motherboard with Celeron processor and ZoneAlarm Security Suite. DSL broadband via DI-524 router with MAC filtering.The Power settings to trigger hibernation after 2 hours were initially working but are no longer effective. I've tried negating hibernation, rebooting, re-establishing hibernation, etc. to no avail.
View 4 Replies View RelatedI can't figure out why my computer is going into sleep mode. I have the power settings to "always on" -- but maybe 15 minutes or so after the screensaver comes up, the computer goes into sleep mode. I guess it's sleep mode, the monitor goes dark and all I have to do is slightly move the mouse and the computer "wakes up". Also, there are a few things on my HJT log that I'm wondering what they are, how they got there, and can I get rid of them. The issues I'm talking about will be bolded in red
Desktop Manager allows you to switch between multiple desktops creating more elbow room for those who like to stay organized while pushing the max thread limit.1. First grab XP PowerToys from microsoft.com Once installed right click then check: task bar > toolbars > Desktop ManagerYou may now view up to four new desktops. I prefer not to have "Shared Desktops" on as it reminds me more of linux (and is cleaner).Now you may hide the buttons etc. and use Windows key + 1-4 to switch between desktops and Windows key + v to preview.
View 9 Replies View RelatedI'm running WinXP pro and have lost all the reguler power schemes from the power options propreties window. Also I'm unable to Save a new scheme.I beleive the schemes where deleted from the power properties window by right clicking and selecting delete. They used to be there anyway Unknown is listed above Turn off monitor-Turn off hard disks-System standby-System hibernates and everything is greyed out. They are still listed in the registry but with no value set.How do I go about getting the schemes back?
View 5 Replies View RelatedI have an IBM NetVista running XP that at shutdown will close windows but will not power off machine, user has to hold power button to power off.
View 1 Replies View RelatedMy PC has old configuration, the Max Power Supply can be only up to 350W. You know that every parts of the PC, either external or internal hardware will consume power. What I would like to know is that, what would happen to my PC if the total power consumption exceeds the MAXIMUM VALUE of the power supply unit.
I found images in Windows Picture and Fax viewer that I want to delete. I can delete them one-by-one, but that takes time. I went to Disk Cleanup up and deleted all Temp and Temp internet files, but the images are still there. I checked Properties of the images for the file names, went to Win Explorer, but only found C:Documents and Settingsuser, there was no subfolder for Local Settings and, obviously nothing after that. I did a Search in Explorer, including hidden files and folders, for the file names and the searches resulted in nothing. I am back to deleting one-by-one, but my concern is, Where did everything from Local Settings on go to. BTW, I also run Skybot, Adaware and Norton virus weekly
View 14 Replies View RelatedWhen I started up it says Win.ini corrupt. Then it starts up as a new user losing track of Favorites and Start Menu and Desktop Icons, Display and Folder attributes. Under
Documents and Settings it has added Dave.U5R2D5 in addition to Dave which still has all the information. I tried switching the 2 Filenames to get back to what it used to be but gave an error message and didn't do it and started another new file.Is there some way to use the old Dave file?
I'm having a major problem with XP Home Edition. When I start my computer, I get the Loading Settings screen, which automatically switches to the Saving Settings screen and then goes back to Loading Settings, Saving Settings, etc, etc, (the "Windows XP Startup" and "Windows XP Shutdown" sounds repeat themselves one right after the other). By the way, I have the XP tweak that skips the Welcome and log on screens at startup since I'm the only person that uses the computer. I've tried Debugging, Safe Mode with Command Prompt, Restore To Last Working Settings and a few others, but nothing is working. I ran Spybot just before shutting down the computer the last time it worked and got the "Congratulations! Your system contains no spyware" message. When I restarted the computer, I started having this problem. I also have Norton Anti Virus 2004 and did a Live Update (manually) a few hours before this started happening.
View 14 Replies View RelatedWhat is the "Temp" folder for which is at C:Documents and Settings Admin Local Settings Temp? Nothing seems to appear there while I use IE to browse.
View 3 Replies View RelatedFiles and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
View 2 Replies View RelatedHey I'm getting serious hangs on my PC - Having to power off, Explorer error report reads.
View 14 Replies View RelatedOn my Windows XP tablet, if I put an MP3 player into a USB port, does it charge the battery even when the pc is completely shut off? I don't like to leave it plugged in to charge when I am using the pc since it keeps bonging (making a darn noise) every few seconds.
View 4 Replies View RelatedRunning Window XP pro SP3 DFI lanparty motherboard (Ultra D)Has OZC power supply GSX700. The problem I am seeing is it takes 20-30 seconds for the power to come on after you push the power button. I have never see one do this.
View 7 Replies View RelatedI can't boot my computer after a power cut happened. It just goes in circles asking me to start up normally, or use the last configuration that worked. Neither of which work.I'm using Windows Xp with Sp2 and had installed a new version of ZoneAlarm but hadn't restarted the computer when the power cut happened.I had also changed the boot screen using Logon UI Boot Randomizer, and it's the changed version of windows that doesn't start. If i select the original windows, it starts fine. Is there a way to delete the chaged version (with the modified boot screen) or make it work again? At the moment, everytime i start i have to select the original version, which seems to work fine.
View 9 Replies View Relatedlast time i was to format the hard drive of my hp laptop while files were copied through os cd all of sudden due to power cut the installation had to cancelled,when next time I tried to install the os my laptop screen showed a message "NTLDR IS MISSING..TO RESTART PRESS CTRL+ALT+DELETE" BUT EVEN TRYING TO RESTART IT COULD NOT
View 5 Replies View Relatedwhen I turn it on it asks for a power on password and I have no idea what it is-How do I get around it? I have pushed every button I can think of. It has windows xp home.
View 3 Replies View RelatedEver since a power failure yesterday, my computer is not booting 100% of the way - it seems to stall at the end after loading desktop etc, can't see anything missing but I am unable to do anything. Nothing opens when clicked on. It works perfectly in Safe Mode with Networking.
I checked Device Manager and found 3 things highlighted:
HID Non-user input Data Filter
HID Non-user input Data Filter in HID section, and
WAN Miniport (IP) in Network Adaptors.
I do not have a wireless network, only a hard-wired one, so not sure what that is about.
Normally I would go to the control panel, then hit display, then screen saver. At the bottom there is a butten to control power. I used to have several options as to when to go stand by etc. It is all gone. Can someone tell me how to get that back. It is running one of the schemes now but there is nothing shown. This is on XP.
View 5 Replies View RelatedI am not sure how this happened, but it did anyway. During my problem with system restore, I created my own power scheme called test. I have noticed that I am missing some power schemes now when I try to access them using the power options choice on control panel. I am missing "always on" "presentation" "minimal power management" and "max battery".I don't know why they don't appear in the drop down menu under power schemes as "home/office" and "portable/laptop" and my "test" schemes are there.I have found these schemes exist in my registry in several locations by typing "powercfg" in the registry editor.Hopefully someone will know how to restore them. Is there an *.inf file to right click to reinstall? I found a bunch, just not sure which one it might be.
View 4 Replies View RelatedWhen I go into control panel power options power schemes, it shows blank inside the box, I couldn't set my time to turn off, standby etc.
View 35 Replies View Relatedi can't adjust my power schemes in my power options--i've got my monitor shutting itself off after 10 minutes, always have , just recently got a new 3d screen saver and tried to adjust the shut off time & i can't change any of the setting in power schemes. where it usually has the option home / office / laptop, etc its black and won't let me adjust anything seems strange.
View 8 Replies View RelatedI have reset my power settings, many times, to never turn off. I have tried setting a special scheme. I have reset rcgfrestore.reg, and savesettings.reg per KellysKorner items # 204 right, and #30. After going online for a while, "turn off monitor" changes from "never" to "15 minutes", and "turn off hard drive" changes from "never" to "1 hour". So far, I am unable to determine what triggers this change.I am using XP MCE, fully updated with Athlon 64 3500.
View 6 Replies View Relatedi need to restore power schemes/configurations" my compuer goes to sleep i have no control to change options at power schemes.
View 1 Replies View Related