I can't boot my computer after a power cut happened. It just goes in circles asking me to start up normally, or use the last configuration that worked. Neither of which work.I'm using Windows Xp with Sp2 and had installed a new version of ZoneAlarm but hadn't restarted the computer when the power cut happened.I had also changed the boot screen using Logon UI Boot Randomizer, and it's the changed version of windows that doesn't start. If i select the original windows, it starts fine. Is there a way to delete the chaged version (with the modified boot screen) or make it work again? At the moment, everytime i start i have to select the original version, which seems to work fine.
We are trying to start a laptop but windows is not starting up properly. As the boot begins, it takes you to a screen that says, :"if a previous start up attempt was inturrupted due to a power failure, then choose Start Windows Normally". We follow the directions, takes us the Window XP screen trying to boot it up and then takes us to the Gateway screen and then back to the screen where it asks the same question again.The cycles continues without any other options.
computer for a few days you would press the start button on the tower and it wouldn't start right away but then after a few sec would come on. Yester day I tried it twice I pressed the start button on the tower and you could hear the power supply try to start but would die and the computer would not come on. so about the thired time press the button and nothing, would even try to start. I figured it was the power supply. I put a tester on the power supplyh and it said it was bad, so I bought a brand new one put it in and it still would n't do anything just dead.I tested the new one and my tester sasid it was bad, I changed it for another one and the store I bought the 1st one from tested the 1st one and there tester showed it was good, so my tester must not be working.
Or at least I think so, there was a whopper of a lightning storm and then Windows wouldn't start up the next morning. I've been trying to trouble shoot and am at a standstill close to the answer.
It will start in safe mode I cannot restore it using the disc I disabled several things in device manager and that didn't help I tried the repair from disc as well, doesn't work I finally reformatted - still doesn't work.
I have a problem I have a new system installed Windows XP professional. Everything was ok till yesterday. I just have a few more things to install and I have the computer plugged into the 4 plug UPS so if the power goes down the computer has 5 minutes to shut down. Well the hydro went off yesterday for a few seconds and all of the other computers came back up but the new one. It was booting into Windows got to the Windows logo and the bar going across loading then after 10 minutes still sat there. I decided to re-boot to see what was wrong as I am a computer tech. Nothing so I went into safe mode that was fine got out of there same thing logo looks like it was starting nothing. I did put in the Windows XP disk thinking to just do a repair still the same thing. I get the Windows screen like it is loading nothing. Go back to safe mode and here is what it says and there is no disk at all in the drive. Can not run setup from Safe Mode rebooting computer.
I need some help figuring out how to reinstall/copy files for my start menu.I lost power last night and now my start menu is missing I have all ready replaced the these files.Every thing else seem to be working fine I have all my icons and can still browse my computer.were is the start menu located in the windows folder.one more thing I think might be important is that all user accounts are having this problem.
Windows XP Media Edition and here's my problem. I told XP to use the CHKDSK utility on startup, but whenever it reaches step 4 37%, it just freezes and I'm forced to restart the computer. When I restart, the same thing happens. Is there any shortcut to bypass the CHKDSK? This all started because whenever I ran a full virus scan or spyware scan I would get a BSOD In_Page_Kernel_Error... So i tried running them in safe mode and then I would get a IQL BSOD. Eventually I decided I should try to run CHKDSK and it has lead me to this dead end. If I could just figure out a shortcut to bypass it, I would be happy because the computer actually works fine, I just suspected spyware so that's why I began attempting to disinfect it.
Desktop Manager allows you to switch between multiple desktops creating more elbow room for those who like to stay organized while pushing the max thread limit.1. First grab XP PowerToys from microsoft.com Once installed right click then check: task bar > toolbars > Desktop ManagerYou may now view up to four new desktops. I prefer not to have "Shared Desktops" on as it reminds me more of linux (and is cleaner).Now you may hide the buttons etc. and use Windows key + 1-4 to switch between desktops and Windows key + v to preview.
I'm running WinXP pro and have lost all the reguler power schemes from the power options propreties window. Also I'm unable to Save a new scheme.I beleive the schemes where deleted from the power properties window by right clicking and selecting delete. They used to be there anyway Unknown is listed above Turn off monitor-Turn off hard disks-System standby-System hibernates and everything is greyed out. They are still listed in the registry but with no value set.How do I go about getting the schemes back?
My PC has old configuration, the Max Power Supply can be only up to 350W. You know that every parts of the PC, either external or internal hardware will consume power. What I would like to know is that, what would happen to my PC if the total power consumption exceeds the MAXIMUM VALUE of the power supply unit.
On my Windows XP tablet, if I put an MP3 player into a USB port, does it charge the battery even when the pc is completely shut off? I don't like to leave it plugged in to charge when I am using the pc since it keeps bonging (making a darn noise) every few seconds.
Running Window XP pro SP3 DFI lanparty motherboard (Ultra D)Has OZC power supply GSX700. The problem I am seeing is it takes 20-30 seconds for the power to come on after you push the power button. I have never see one do this.
last time i was to format the hard drive of my hp laptop while files were copied through os cd all of sudden due to power cut the installation had to cancelled,when next time I tried to install the os my laptop screen showed a message "NTLDR IS MISSING..TO RESTART PRESS CTRL+ALT+DELETE" BUT EVEN TRYING TO RESTART IT COULD NOT
when I turn it on it asks for a power on password and I have no idea what it is-How do I get around it? I have pushed every button I can think of. It has windows xp home.
Ever since a power failure yesterday, my computer is not booting 100% of the way - it seems to stall at the end after loading desktop etc, can't see anything missing but I am unable to do anything. Nothing opens when clicked on. It works perfectly in Safe Mode with Networking.
I checked Device Manager and found 3 things highlighted:
HID Non-user input Data Filter
HID Non-user input Data Filter in HID section, and
WAN Miniport (IP) in Network Adaptors.
I do not have a wireless network, only a hard-wired one, so not sure what that is about.
Normally I would go to the control panel, then hit display, then screen saver. At the bottom there is a butten to control power. I used to have several options as to when to go stand by etc. It is all gone. Can someone tell me how to get that back. It is running one of the schemes now but there is nothing shown. This is on XP.
I am not sure how this happened, but it did anyway. During my problem with system restore, I created my own power scheme called test. I have noticed that I am missing some power schemes now when I try to access them using the power options choice on control panel. I am missing "always on" "presentation" "minimal power management" and "max battery".I don't know why they don't appear in the drop down menu under power schemes as "home/office" and "portable/laptop" and my "test" schemes are there.I have found these schemes exist in my registry in several locations by typing "powercfg" in the registry editor.Hopefully someone will know how to restore them. Is there an *.inf file to right click to reinstall? I found a bunch, just not sure which one it might be.
i can't adjust my power schemes in my power options--i've got my monitor shutting itself off after 10 minutes, always have , just recently got a new 3d screen saver and tried to adjust the shut off time & i can't change any of the setting in power schemes. where it usually has the option home / office / laptop, etc its black and won't let me adjust anything seems strange.
I have reset my power settings, many times, to never turn off. I have tried setting a special scheme. I have reset rcgfrestore.reg, and savesettings.reg per KellysKorner items # 204 right, and #30. After going online for a while, "turn off monitor" changes from "never" to "15 minutes", and "turn off hard drive" changes from "never" to "1 hour". So far, I am unable to determine what triggers this change.I am using XP MCE, fully updated with Athlon 64 3500.
My Toshiba Tecra came with 7 preset power policies, as normally accessed from Control Panel. I've added 2 of my own. When editing one of these to change "close the lid" from hibernate to standby, I got a dialog box with a message that said, approximately "change levels incompatible". After that, only two power policies show, "home office/desk" and "portable/laptop". I searched the registry for "Toshiba power" to find references to the custom profiles Toshiba loads. One of these, number 10, appears to be empty or blank. Number 11 is one I defined and deleted after the problem.I'd like to recover the use of these profiles. I have a registry backup from about a week ago if that helps.
not sure how, but i've lost most of the power settings. And, they don't stay when i save them from the gui. So, can someone help with setting the correct config to get my settings back? I've done 'Repair' from boot and have tried Run> sfc /scannow. Neuther has correct the issue. I'd REALLY rather not do a clean install, but it is looking like the product is just so inherently unstable that i have no choice.
i just installed a new msi g31 board along with intel processor. after installation i tried powering off computer but the os shuts down leaving the board still powered up with cpu fan and other case fan still running. I hold down power for more than 5 secs, same result. I have to power off from psu switch from back of tower. Can u give me some in sight to resolve this issue?
My laptop used to shut itself down after 15 minutes and go into hibernation. Now it doesn't.I went to the control panel under power schemes and hibernation is enabled after 30 minutes, but the system keeps powering itself up.
I just did a reinstall of my friends E-Machine and when I try to install the printer (hp PSC 2410 xi photosmart all in one) I get this message when I go to plug in the USB cable to the computer from the printer. In the task bar I get this message: "Power surge on hub port. A USB device has exceeded the power limits of its hub port".
I have a Dell Optiplex GX240 running Windows XP Pro, Pentium 4,512MB of Ram,40G hard drive and an external 200GBHDD. A 250W power supply. The unit has 3 built-in USB 1.1 ports and I added a USB 2.0 PCI Card for the external. I presently have an USB hub port hooked up to one of the USB 1.1 ports, which leaves the other 2 free. On the USB hub port I have an old HPScanjet 3300 scanner, an Intel Webcam and my Sony Cybershot camera. On the USB 2.0 PCI Card I have only my maxtor 200GB external. I am recently getting a balloon red x alert in my system tray that reads "Power surge on hub port" (A USB device has exceeded the power limits of its hub port)and what to do to solve the problem. When I click the message to solve the problem I see a question mark which I then highlight and hit reset.I follow the instructions to reset and it reappears.
