I have installed Windows XP Home on a PC I built.I can install windows just fine, However when i get the 2nd restart it stops on the windows loading screen, the one that has a little blue scrolling bar across the bottom. I ty resetting and it still stops there. I also tried reinstalling windows and it happens each and every time there. What is causing this? I tried two different video cards and nothing, and different Ram. Is it a bad motherboard? Bad Processor, it shouldn't be considering I can get windows to install up to that point.
I`m about to install a new hard drive, I have my XP Home operating disc with the product key code which has been activated with microsoft. What I want to know is when I re install my operating disc on the new hard drive and enter the Key code will it ask for the activation code? I don`t know it!! Or will it just recognise it`s the correct key code and continue to update as normal!
Im working on a PC (HP Pavillion) and there is a problem with missing files,program crashes and lots of errors (too many to list!),I've tried everything and have now been advised by the shop in question to re-install the OS {XP Home Ed}Now, the PC came without an Install CD-Rom/ Media and I phoned the shop where it was purchased andthey informed me that "Those models are shipped with the XP already on them", so I am assuming the way is to use the partitioned drive with the backup data upon it.The PC has 1 optical drive (D) and 1 partition(E)How do I re_install XP Home ed from a partionioned drive and access the said drive??
I'm running Home oem and would like to partition my hd. For some reason I didn't seem to be able to when I installed Windows. Do I need to use Partition Magic or can I do it within Windows? I wanna run a dual boot system.
Owing to the possible of a corrupted VGA driver I thought I would do a ''Clean Installation'' of the Windows XP OEM Home Edition [including Service Pack 2] within my recently purchased new computer unit.From information read I tried to ''Boot'' from the Windows OEM XP program disk.After a few tries I found could not do same. [It appears you cannot use this process to do a Installation from a Windows OEM XP program Disk???]And afterwards on investigating within the XP program disk I found Within ''Install Windows XP''= ''Welcome to Windows Setup'' = ''Installation Type'' = [dropdown arrow] ''New Installation Advanced'' =This is the process I used and I found the computer ''C /Drive'' still retained the ''Program'' folder containing all the programs I had been using?? Yet the ''Program Menu'' showed nothing??It now appears I have not installed the New Installation of the XP OEM on a ''Clean'' disk?
I was trying to repair my desktop Windows XP Home installation.I have the original restore cds, but did not want to do a clean sweep, so I got hold of an XP Home cd, did all the repairing and copying of files, entered the key on the COA attached to my desktop, and all the process was fine. At the end, it asked me to activate the copy of windows, which I accepted because my key on the COA is all "clean". However, the process does not go anywhere, it only takes me to the desktop, which is blank and has nothing, not even the taskbar visible. The computer freezes.I have repaired other desktops and laptops I have at home before, and the process worked no problem, so I don't know what i did wrong this time.
Before I did the repairing on this desktop, I had disabled my ethernet adapter because I was connecting to the internet via wireless. So I'm thinking the problem is that the wireless card drivers got deleted, and the system cannot enable the ethernet adapter to connect to the internet to activate windows. First question is: Is this the case? Please help.I am not sure if the XP cd I got is an OEM version, or full retail. Second question: Could this be the problem? Finally, I was thinking of connecting an older hard disk that has a working copy of windows on it to my desktop (instead of the one I "repaired"), boot from it, and then activate the ethernet adapter, so I can then plug the original hard disk and hope the activation process to work.
I have Windows XP professional edition i want to install home edition.Is it possible to install both of them or completely uninstall professinal before installing home edition?I have read that by using advanced option in installation we can install installation files in another partition,is it possible?Also if i completely uninstall can i save my earlier settings ?
I just completed a fresh install of windows xp home edition. The computer starts up in safe mode, but not in normal mode. When I try to start in normal mode, it goes to the windows xp loading screen with the green loading bar and then goes blank, with my moniter blinking on and off. a checkdisk in safe mode returns no errors. the only things plugged into the motherboard are my cd drive and a video card.
I did "F6" to install the Intel RAID driver using a floppy disk created from the motherboard support CD. The STOP message/blue screen appeared after XP loaded all the drivers. It is a clean installation on 2 new HDDs, so I assume the error is not caused by viruses. Yes, I did upgraded my BIOS to the latest version beforehand. The SATA data cables are new that came with the motherboard. Yes, I have also read and printed out MS KB324103, but I am still not sure what the problem(s) is/are Does XP Home Edition support RAID1 configuration? I read from Western Digital knowledge base answer ID 282 that "Windows XP Home Edition does not support dynamic disks." Is it true? Does it mean that I will have to buy XP Professional for RAID1 (mirrored)? Should I take out the video card and modem card before installing XP?
This is a new installation on a new hard drive. I got to the point of entering registration information. The next screen asks to click on the user entered os the registered user on the prior screen and then asks for a password. Out of habit I tried my old password. I then tried no password and again with a space as the password. I tried a few others also to no avail. In all cases I get, "the specified domain either does not exist or could not be contacted."How do I get past this so I can setup the domain and whatever else it may need?
i am having 2 new computers built, and the store is installing windows xp home edtn (oem). they said that i needed to buy 2 copies of windows (one for each tower). is this true? you cant use one copy and load it onto both?
also, office. i have a copy of 2003 and i was wondering if i could load this onto both of my comps, or do i need to buy 2 copies of this as well. sorry cuz i am noob.
I formatted the drive and tried to reinstall XP. It goes fine for most of the installation but when it comes to the "Registering Components" part it gets about 2/3 to 3/4 of the way done and then just stops with 12-13 minutes to go. I've tried using the repair option, and totally reformatting again
I have a real XP Home cd key thats really old, and I finally managed to find a real XP home (SP2) disk. i never got one with my old computer. now i just reformatted my harddrive and am trying to install it. however, the computer wont let me pass the part where i enter the key. it keeps on saying that the key is invalid
My home computer gets used by four different people, all of which, apart from me, have almost no idea what they're doing. So, to protect my music collection from accidental deletion etc. I used the user access feature of vista so that only my user account could access the folder that contains all the music... I now cannot access this folder from XP... the data is still there, I've done my maths with free space on drive, but XP reckons the folder is empty, and says. Quote: d: music is not accessible Access is denied when I double click it..
I keep trying to install Windows XP (tried both professional & home edition) and when it starts checking my system, it gives me the following error (the error comes when it is checking (which is the 4rth messsage on bottom of window), "Setup is loading files (Kernel DLL)".I then get the error message "File setupdd.sys could not be loaded. The error code is 4. Setup cannot continue. Press any key to exit"I have searched high and low to find Error Code 4 in microsoft's web page and have found nothing.
I have a locally-built system here with COA and product key. I am guessing it was originally loaded with an OEM copy of Windows XP Home; but, I don't know for sure. I don't have the CD. I used to see OEM CDs with no product key for only $10; but, I haven't seen one lately.
I got this dell inspiron 1721 from a friend, and it had Vista Home Premium. I wanted to get XP back, so I installed it and then the system was dual booting and it took up 85% of my hard drive. SO...I tried to reformat it and just install XP, but the only disk i had was for my (gateway xp media center) desk top so none of my dirvers installed and then the whole thing became a big mess. Now, I have XP installled with most of the drivers installed, but now I miss Vista, and when I try to install with my Vista recovery disk, I get an error: can not install install missing or corrupt file e:sourcesinstall.wim error 0x80070570... or something similar to that. I have been at this for days on end.
I purchased the following system from Costco and was glad I was able to purchase the system complete without having to add components after the sale. I have tried and tried to get used to Vista (6 months) but as I am disabled and my brain doesn't always compute efficiently, I've had difficulties. Mostly with getting things recognized on the small network in my home. My other computers run XP and I wonder if there is not some conflict with the different operating systems trying to access the same files and printers? Finally I just decided to go back to XP..
Due to several fundamental errors in my Windows installation, today I decided to make a repair install of my Windows XP Home installation. I booted into my Windows disc, did all the normal stuff, and it seemed to go fine. At the end of the text-based stuff, it gave me the instruction to reboot, having moved the files it needed to the HDD, I believe. Anyway, the jist is that the text-based stuff seemed to go fine, I rebooted as instructed, and then did NOT click to boot from the CD (which, I believe, was the right choice). I let Windows load normally but... no GUI based stuff came up to finish off the repair installation, and consequently, what I've done seems to have had no effect whatsoever.
Isn't the problem going from vista back to xp an sata driver problem? If you would disable sata native mode then boot from the xp cd it should show the hard drive and any partitions. The biggest chore may be getting the drivers needed for XP and if is a laptop they rarely come with a floppy drive, so during the xp install I don't know if after you press F6 if you can remove the xp cd and put in a cd that you burned the needed drivers to if a floppy is not available. People should have the freedom to choose whatever operating system they want without all of the headaches
Im downloading right now and since they is alot of trouble on vista its probably not gonna come out for another year or year n half they were gonna resale it summer 2006.
First of all, I'd like to address the fact that this thread is on the wrong board, but I'll be honest and say I picked it because so many people are viewing, and I really need some help. I don't exactly know where to put this thread, so if a mod feels the need to move this, go ahead. I am using Windows XP, though.Anyway, my friend let me have his old headset a few months ago, and it, basically, isn't working very well. For some reason, some days it works decently, and others not at all. I've found out that for the times it does work, I need to have the mic right up to my lips, and even then my friends have a hard time hearing me. My headset is always turned on, and I have the sensitivity all the way up. It's one of those headsets where two jacks come out the end, one a headphone and another a microphone jack. They are both firmly stuck into my motherboard.
I have a copy of XP Pro here on DVD and having trouble getting it to boot. I downloaded setup onto six floppies and they all install fine but when it is time to put in DVD it says something along the lines "you have a faulty cd".I checked it out on another computer and the XP Pro seems to be on it alright but how do I get it to boot.
I had windows 2000 pro. I wanted to do a full format and completely wipe my hard disk, and install windows xp pro. I did it wrong though, and when my comp was on and i was on windows 2000 desktop, I inserted the windows xp cd and chose a new installation. Windows XP installed, however since I did it wrong and did not format, I now have both XP and 2000 on my hard drive. I tried to fix this problem by going into my BIOS and changing the boot order. Currently it is set to boot 1st from my cd rom. However, when I turn it on, it begins to start up, and says hit any key to boot from cd, but when I hit a key it just continues to load windows. the next screen asks me to chose an OS or press F8 to go into advanced setup. However, again it does not let me give it a command to change the highlighted OS, or go into F8. I can still go into my BIOS, and once windows loads up, my key board works fine, but for whatever reason when windows is starting it seems like it's not communicating with my keyboard. I do not have an A drive so I can not boot from there. I tried to reformat within windows, but since I'm asking it to reformat the drive I am already using, it will not do that. All I want to do is format my harddrive and wipe all OS's off and all info, then install XP. Can I do this without A drive, or without it recongizing when I hit a key to boot from cdrom.
I am having trouble with my system. I had recently upgraded my sytem to 2 GB RAM. I click on the folder for viz. when I Click on my computer>>d: folder>file it sould go step by step. But instead of going step by step after I click on back button it directly goes to my computer instead of going like file<<folder<<d:<<my computer And also like Whenever I click on any folder or application it opens up along with the other folder and applications.
i'm having trouble formating my computer i pop in my boot window xp pro sp2 cd and run it and half way through... it pops up a window saying the file corrupted and it ask me to restart the computer and i tried installing windows through desktop + putting in the cd still doesn't work.my computer running SATA Harddrive was wondering if theres any other method i can do to format my OS hard drive.also anyone ever encounter a problem where they idle there computer for couple hours and it freeze ?
First off, this is a legit copy of XP Home, and I've used it and successfully activated it in the past. The problem is that when I click on Activate Windows, this is what appears. I've tried waiting awhile, but this is all the farther it gets. Nothing is sucking resources while it's sitting there, and everything seems to be working just fine otherwise. I really have no idea what to do other than reformat and reinstall everything again.
