A friend of mine has an old computer with Windows XP home on it. It's basically a piece of junk, out dated and has things wrong with it. Basically the capacitors on the board are popping and leaking. It won't run anymore. So a new computer will be bought. New motherboard and case.
However it has no windows. The windows on the old system is pre-loaded on that computer. Is it possible to somehow install XP on the new computer using the old key and without buying a whole new copy of Windows XP? I figure xp won't allow this right off the bat, but does Microsoft offer any way to do this? I think it should be possible since XP is only being used on one system. Paying for windows twice doesn't seem just right in this case.
I also know some keys are defined for certain types of hardware configurations (oems etc). But I still wonder if there is a way.
i have 2 hard drives in my system h/d 1 is 40 gb and holds windows xp and few applications, h/d 2 is 15 gb and holds all my games. i am going to ureplace h/d 2 with a larger h/d (80 gb), my question is can i copy my games over to the new hard drive and remove h/d 2 without causing system problems/comflicts or should i just uninstall my games and reinstall them onto my new h/d (80 gb).
can any one tell me what I need to transfer some old video's to dvd I have windows dvd creator program but don't know what cable I need to link my vcr to my laptop I have tried a ulead usb instant video creator but with no luck.
I just bought an HP mini notebook and want to transfer my "Favorites" and 'Address book' to the new computer using a USB memory stick. Both machines are having Win XP Home Edition. I tried to use Windows Easy Transfer and even there I don't know where to look for my address book and can't get the screen resolution on the mini to remain as required by Win Easy Transfer before it will work on the computer.
1.I want to transfer data from my old Compaq to my new HP, is this called mitigation? O/S's - Windows XP Home Edition - Windows XP Media Center Edition 2005
2. The connection will be by USB 2.0, cable.
3. Is there a way to select some programs and not others or is everything transferred?
4. I know certain information has to be written to the registry, like when a new program is installed, how do I transfer those settings from the old to the new?
Will be getting new computer soon (vista)What's nessesary to transfer documents and Photos and favorites from the old computer? (Windows XP)? Do I need to have a special program installed? I'll need some sort of cable between both computers?
I have a Sony Vaio and I have way too much on my C drive - I can't even defrag my computer due to usage. I was curious if someone could walk me through the steps to move some of it to the D drive to make some space. I am afraid to delete anything that came w/ the computer - in case there are shared files or something. Also I can't find the disks/paperwork that came with it.
How would I go about connecting two separate desktop PC and then transferring the data from one to the other. Both have windows XP on them. If someone can tell me where to find the info, it would be deeply appreciated.Can they be connected with a serial cable, CAT5, USB or other cable without setting up a whole network?
I use the tool files and settings transfer wizard but when i restore the data on the new profile the office outlook settings are not copied. Any way for transfer the user office outlook settings from a profile to one another.
I am purchasing a new computer. How do I transfer the emails and addresses from Microsoft Outlook to my new computer? How can I transfer my saved bookmarks from Firefox and IE to my new comuter?
if it possible to transfer video from my JVC video camera, not digital) to my computer, so I can transfer it to a dvd or cd. I have windows xp home, but don't know if you need to know any other info. If so, let me know, and I will add it.
This is the problem in which I'm currently in. I saved roughly about 15Gs worth of music and numerous pictures in my documents. Well since then I've changed the h.d, motherboard, and a few other things and installed a fresh copy of windows on the alternate h.d. well with the first h.d set as a slave and no means of going back to my original setup because i deleted most of everything on the h.d except a few folders it won't give me access to those folders. I'm wondering is there anyway of gaining access to those folder?
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
i have windows xp pro installed on my pc along with linux mandrake 10.1 and one day while my dad was surfing the net the sreen turned blue and some type of error message came up and it said to do something if it happend again but i ignored it becuase i thought it wouldnt happen again so i restarted and when it came back on it went to a black sceen and i couldnt do anything but if i let it wait there it would come up with an error saying that windowssystem32config system was missing or corrupt
The system can be restored by using the Startup CD and pressing R for recover, but I do not have any cd. The only one I have it the recover cd, but it is my understanding that if I use the recovery cd that I will erase everything from my computer and I can not do this.I tried to read the other threads about the same problem, but to be honest I do not understand them and I just do not have the startup cd - maybe it is the same as the recovery cd?
On reinstalling my Windows XP x86 and using Windows Update to get everything back uptodate to the present day. I am having serious problems getting my sound drivers to install. I have tried everything under the sun, also tried a few things which i found while roaming the internet (Mainly google searches for the problem).
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
I shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
Some time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
i rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
I am trying to use the system restore function on windows XP, but every time i select a restore point and the system reboots, it says that the restoration was incomplete and "no changes have been made." I have tried multiple restore points. Microsoft.com suggested that i verify that the task manager, WMI, and system restore services were running, and they are. I also tried disabling my antivirus program, but the same thing happens.
Had problems with virus, couldnt update Virus or Malware Protection. I did full shred System Recovery from partition ( HP- A1130N -Windows Media Edition- Version 2002 Service Pack 2. Dowloaded AVG Virus and ran scan, all OK.Went to MS Dowload center and downloaded and installed 87updates to include IE8,started computer, all OK. Then updater said needed to download SVC Pack 3- took a loooooooooooooong time. THEN COMPUTER WOULDNT START- tried the two options it gave me but no go back to same black screen with boot options-- regualar- last working point- safe mode etc. no go. At this point I did a full System Recovery again and downloaded virus protection again.
I'm running a Dell XPS 600 with Windows XP Professional Media Center Edition. Well, OK, it's not really running.I used System Restore to return my PC to a point about six weeks ago when the system was more stable. The PC rebooted, and now it won't boot any more due to a missing/corrupt CONFIGSYSTEM file.It won't boot from either of my CD drives, either. I've used the boot Setup to alter the boot sequence but that doesn't help, the system just doesnt recognize those drives during boot. For this same reason, I've been unable to access the Recovery Console.
I have a laptop, a Dell latitude d610 that says:Windows could not start because the following file is missing or corrupt: windowssystem32configsystem I attempted to try the fix listed here:http://support.microsoft.com/kb/307545 but when I went to copy using the command: copy c:windowssystem32configsystem c:window mpsystem.bak into the tmp directory I created it said: File could not be copied.
So i booted my t400 ibm laptop and this error message popped up as stated in the message title.My harddrive is in achi mode and i was wondering if i switch the harddrive mode and do a repair with an xp cd, will i lose any files?
Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM This is the error message i have. I have a copy of windows xp pro. i have no backup disk.
I have a Windows XP Pro box (named Shadow) with shares set for the root of each drive. I also have one external USB drive J:. I have used the Disk Manager, Add drive letters, to mount this drive as G:Shadow-J. I have set share for G:Shadow-J as Shadow-J. (I use this mount point approach to avoid the problem with the NET SHARE disappearing from J: when I turn off the drive.)From another machine, either one running XP Pro or a laptop running XP Home, I do NET USE for five different shares on Shadow. NET USE works fine for the shares for Shadow hard drives (C:, E:, F:, G but fails with error 1130 "Not enough server storage is available to proceess
I am trying to do a system restore and my system runs it all but when all is done I get a message saying that no changes have been made to my system and that the system restore was unsuccessful. The reason I am trying to restore my system is because Photoshop is suddenly unable to save as a jpeg? It doesn't recognise the jpeg format when saving and saves as a Photoshop document. THen it wont recognise the file to open it. I have uninstalled and reinstalled the program to no avail. Funnily enough photoshop elements has no problem with it.
By default, Windows XP keeps a backup of system files in the System Volume Information folder. This can eat up valuable space on your hard drive. If you don't want Windows to back up your system files:1. Open the Control Panel2. Double-click on system3. Click the System Restore tab4. Check "Turn off System Restore on all drives"5. Hit Apply6. You may now delete the System Volume Information folder.Warning! If you turn this off you will not be able to use Windows System Restore to restore your system in case of failure.
