I have a Dell Inspiron 4100 laptop with Windows XP Operating System. Recently, the mouse begins to move on its own without me touching anything usually the left bottom corner but it could be other directions as well. When I use the touchpad, the mouse moves but I am competing with something stronger pulling it to one side so I have trouble controlling the mouse in general. Since the Inspiron has two types of laptop mouses (the touchpad and ball), I have to use them both in tandem to actually move the mouse
I got a new computer and I have been having problems with my mouse. I have a simple optical wired mouse. During random times, my mouse click freezes, although my mouse can move and I can use the key board at this time, I cannot click or focus anything. To fix the problem I can control alt delete and exit the Task Manager, this fixes the problem.
im running XP. for some reason lately, i've noticed since my family changed ISP's, that my computer temporarily freezes. Like I'd be running 2 IE's, and I'm switching to the other browser, when the screen freezes - but I can move the mouse. It freezes for around a minute to a few minutes, but I can move the mouse. I go to click on eg the Start button, go back to the browser i was originally on, etc. Only after the screen temporarily freezes does the start menu come up at around the same time the browsers switch from one to another. how do i fix this? it's REALLY annoying. it doesn't only happen on my computer, but on my parents' computer as well. the funny thing is that it doesnt happen to my bros computer.
I've got Windows XP Pro, SP2. Say your mouse quit working. Isn't there a way to move around and select stuff with the keyboard? I've looked in "Help" but I must not have known how to phrase it because I could find nothing. Could somebody please tell me where to look?
Couple new things. I've been using win98 for the past 7 years, but now have 2 new items a mouse with a scroll wheel and win xp pro. I've dug thru just about everything I could find to see if I could get this mouse to respond when I move it. But so far nothing. It sits there I'm guessing just to make sure the mouse actually moved for justthe annoyance factor length of time. then it jerks and catches up. Other than this nothing wrong with the mouse.How do I get it to move when I move ?
I have an Acer 2312 laptop running WXP. The cursor can not be moved by the touchpad. I have uninstalled and reinstalled the touchpad and its drivers several times wih no success. Device manager tells me everything is just fine. The cursor responds normally to my wireless mouse so I can live without the touchpad but I don't feel comfortable when something malfunctions; particularly when I don't know what caused the glitch.I have searched the sites of Acer and Symantic and found no useful information.If anyone has a clue on what the solution Is I wouldmuch appreciate hearing from you. stewart
Where is the control for the setting that makes the desktop resume with one move of the mouse? Mine seems to have changed itself from one move of the mouse, to two moves of the mouse, to bring the desktop back up. I don't remember doing anything at the time, or ever really, like software installs, sys restores, etc., that would account.
I'm using XP Pro. I'd like to prevent my system from resuming from Standby mode every time the mouse gets nudged (which, on my crowded desk, is often). How can I do this? I've read in a few places that you can set the "wake up" option for the mouse, but I've never been able to find this setting.
Just bought my grandson a Dell ( DPH).GX280+ 15" monitor from a co. This a reconditioned unit(suppose)? CPU fan sounds akin to a euro fighter on take off,but the main problem is that the on screen message on the monitor is "power save- press any key or move the mouse "Problem is the usb ports are not supplying power to mice or keyboards .(Tried a few) The monitor is ok.as tried it on this comp.Anybody any ideas or is it just a duff buy?
I've spent the last two months just trying to get Windows to operate correctly on a new Mac. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot Windows directly, I received the damning <windows root> system32hal.dll file is missing or corrupt - again.
When I start the computer, after the windows XP logo I get a blue screen with border top and bottom and a small windows logo and the mouse cursor then I can do nothing but move the mouse cursor around that screen.
I just put together a new system from scratch and regretting it BIG TIME, I have an intel d915GAG board with an intel P4 3.2 chip. Brand new WD HD, floppy, and 2 dvd/cd drives. After the final screw was tightened, I started my new system and the intel logo appeared. I pressed ESC and it appears to start the bios setup. It flashes my memory size (size is 512 MB), then the screen immediately flashes and begins to do and IDE scan, in which it promptly tells me that Device 0 not detected, device 1 not detected, device 2 not detected, device 3 not detected....and the setup stops right there. I don't have a clue, after searching Intel's site for 2 hours where to go from here.
hi guys I have a problem, I was having problems installing flash player , after some troubleshooting from adobe website I restarted the system , and windows begins to boot ,the black windows logo starts and then It changes tothe blue microsoft windows screen and then it freezes ,it it doesn't continues to the log in screen. I haved tried on safe mode but the same problem persits. I also tried a windows repair but that also fail.
I'm running Windows XP - Media Center Edition on Intel Pentium 4 CPU 3.2GHz, 1.5G RAM.This morning, Norton 360 detected and blocked several intrusion attempts, but stated that everything was secure.Shortly thereafter, every program that attempted to open would generate the following pop-up message, "[program name] UNABLE TO LOCATE COMPONENT - The application has failed to start because msefrms.dll was not found. Re-installing the application may fix this problem."I click OK to acknowledge this message, only to have it reappear. After several "OK clicks", however, the program usually opens and functions properly.
I restarted my PC to get into safe mode to run a virus scan, but the message appears even before Windows begins (even on winlogon, services, lsass, etc.). Again, a few clicks of OK gets me past the message and into Windows.I haven't been able to find ANY reference to msefrms.dll on the web.
i have a dell 6000, when i turn it on the xp starting sequence begins nad suddenly it shuts off with a message of fatal error and a lot of zeroes followed by a 5, what could be the problem
I just got an insprion 6000 running and the touchpad has a mind of its own, not responding well at all. I've tried to adjust in control panel w/ no sucess.
Hi. I really hope someone can help me. Today when i turned on my laptop, i found that the left button on my touchpad would not work, and neither would double clicking the touchpad. The right button seems unaffected. Unfortunately, I can do very little with my computer now, as I cannot click on anything. Using the keys, I managed to do a system restore
when i rebooted my computer, the touchpad didnt work i went into the mouse drivers and i didnt see my touchpad installed Im thinking that a virus may have knocked out my touchpad driver
A LG netbook turned it on and the cursor is just stuck there in the middle of the screen. I don't use a mouse, just the touchpad, so I can't even attempt to do anything. Everything else seems to be working fine in the background upon boot up and on the desktop, but the cursor won't budge. Tried to open control panel but obviously can't do that with the cursor stuck. Any options the DON'T involve me having to buy a new USB mouse
I have a pavilion dv9000 notebook running XP and every time I change the pointer speed for the touchpad to its fastest setting it will reset itself to the default setting after I shutdown and reboot. I need the touchpad on its fastest setting because of the wide screen and the fact that I don't always have my wireless mouse w/ me. is having a Logitech wireless mouse installed. The setpoint.exe program for the wireless mouse runs in the background whether or not the mouse is connected.
I've got an HP Pavilion ze4400 on which the touchpad doesn't work. I can't be sure whether it's a faulty device or if drivers aren't installed. In Control Panel, under Mouse, Hardware, only one device (the USB mouse I'm using) shows up. I'm not sure what the standard touchpad driver for HP notebooks is. Going through the Add Hardware Wizard and telling XP that the device is already installed, it then gives me a list of installed hardware to select from. I don't know what that driver is, if it's even in there. what the driver is this
i just got me a toshiba laptop and i was wondering how i can disable the double tap feature on the touchpad cuz i always seem to double tap it by accident.
I have a Dell Inspiron 6000 with wonderful touchpad, which I do not want to work because I have a wireless mouse. I cannot seem to find a way to turn the thing off.
i've been having problems with my touchpad since i've reformatted my computer. I no longer have the software that controls, and i've attempted to disable it and even delete the driver in Device Manager, but it just doesnt work. disabling this annoying component
I have a client who has a Dell Vostro 2510. I installed the Alps touchpad driver which on all my other laptops has a disable tapping feature, but for some reason that feature is not present for this laptop Am I using the wrong type of driver?
I have a Dell Latitude c800 XP Laptop. The touchpad is too sensitive, I have the sound set at maxium volume some videos/programs are good at maximum volume but others I can bearly hear.
My Acer TravelMate TM802LCI notebook touchpad and left/right click buttons are not responding to any user inputs. Have tried reinstalling Synaptics driver to no avail. Currently using a wireless mouse connected via USB port. Touchpad version is v5.8 and hardware properties show it is connected through PS/2 port and is working properly. BIOS shows that the touchpad is enabled for both internal and external inputs.
