MacAfee automatically updated and said it needed to restart. So I hit restart as nothing was running at the time. When the computer tried to restart it took FOREVER, at least 5 minutes. When it finally did come up, none of the links work. I treid to get into System Restore, it said System Restore had been turned off. News to me I never turn System Restore off. No access to the internet. Go to printers it shows no printers installed. Most programs, if you try to run them they either don't open, or open and close abruptly, or with McAfee it opens with nothing inside the box. Or if you try to do something like turn the System Restore on, the program stops responding. I actually did a registry edit to turn it on, but it still won't let me set a new restore point, and it says there are no old restore points. Basically the computer is totally unusable.So now I boot in SAFE MODE. Doesn't do much for me but allows me to look around. So I reboot in SAFE MODE Directory Services which says the drive is clean and the computer now works great in this Directory Services mode.
I am running Windows XP, and a number of system upgrades were downloaded and being installed during shutdown. Unfortunately, the power got turned off partway through this, and now the computer won't boot up. I tried putting the Windows CD in to run a repair installation, but it still gets stuck.I get the "Press any key to boot from CD" message, but when I press a key there are two lines of text that appear and disappear too quickly for me to read them, and then it goes to a blank screen with flashing cursor, and doesn't do anything else.
It has an MSI board, Celeron D cedermill at 2.2ghz. Western Digital 160gb sata drive. I don't think any of that really matters, but heres the problem. When trying to install windows XP, after loading all the drivers it needs and it gets to 'starting windows' a blue screen comes up saying something like 'your system was turned off to prevent further damage. The hard drive works fine in another system, and so doesn't installing xp. I put the hard drive with xp installed. It tries to load, same screen. But it installs windows 2000 without glitch.
Things worked well until I connected a USB 2.0 Sony DVD burner [ owned by an associate ]. With PC & Sony burner turned off, I connected the Sony burner. Booted to Windows. Turned on Sony. Windows identified mass storage device & Sony burner. I re-started, and can't get beyond the Win XP Startup menu. Suggestions other than FFR [ fdisk, format, re-install ] and booting with the CD [ yes, I have an official Microsoft Win XP SP1 disk ] to run the repair will be appreciated. Also, I'm not interested in Linux, MAC or any other OS at this time. Soon, perhaps, but not tonight.
I am on a fresh clean install of Windows XP and Windows has already updated five times now. Windows is set for automatically download recommended updates and install them. I turned on my computer tonight and it downloading updates again for a total of six times now, when will it stop? I am starting to worrie here.
If someone downloads and runs a trojan and then uses system restore to back to a system restore point prior to running the virus, is that computer still infected?Nocturnal http://www.spywaretalk.org
Installed Norton Internet Security 2005 and now, whenever I try and do a system restore it says "System restore encountered a problem and has to close". It does this all the time, even in safe mode. Symantec has mentioned that I should turn off NIS2005 and try system restore. If it then works it is a Microsoft issue. I have been onto the Microsoft websites and they do not mention how to repair or reinstall system restore
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
S/Restore system when operated comes up with "Cannot restore your system to an earlier date" Have checked for all spyware and viruses (Nil) Have tried disabling the system and also making new restore dates to no avail. Would kindly request any posssible solutions to the above also any other programme I could install to carry out the same or similiar functions to "Systems Restore
I was messing around with CCleaner and deleted something to do with an old version of McAfee (which isn't even on my computer anymore) from the registry. Yes, it was stupid to mess with the registry I guess because I failed to make the backup and now my computer won't boot. I get the blue screen that says there was an error 0x0000008e, or something like that.
I have tried using F8 and choosing the last known good configuration but it doesn't work. Also, I can boot into safe mode and I tried running a system restore but after it finished and I rebooted, it said that I couldn't restore from that point.I haven't really tried another restore because I am a little afraid to do anything. I don't want to risk losing access in safe mode because I need to be able to back up some of my files if in case I have to do a reformat.
My computer had a turn yesterday and kept giving me the blue screen error on start-up, so using my windows disk I managed to run chkdsk. So I can get on now, but certain things won't run, like Media Centre, Firefox has forgotten my settings and also my iriver doesn't get acknowledged when I plug it into a USB port.So I am trying to run System restore to go back a couple of days.I can get into restore, and go through everything up to the point where you click 'next' in order to restore it.I click on next but nothing happens, it just stays there.
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
i want to restore my laptop. had restore turned on until about 3 weeks ago shut it off. question:if you shut off restore does it still keep the last restore points? and is there a way to restore in safe mode (cant boot in reg mode) if restore is shut of. when i try and turn on sys restore in safe mode it say "i cant"
My comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below. However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.
My system restore is enabled but no matter what bold restoration point I choose I am told system can't be restored to that date, choose another restoration point. I do, the system shuts down and restarts and I get the same message.
How do I do a restore to factory settings? The only thing I have been able to find is a system restore to an earlier date, could someone help me please?
I have Windows XP. I create restore points, but when i try to use the system restore, it says; Restore failed, could not resstore computer. I choose a different date and get the same thing, Can't restore. Does anyone know why this happens?
My norton anti-virus said that some files were mssing. It said that if I restored my computer to an earlier date that this should correct the problem. My computer has restore dates so I picked one from the previous day. When my computer re-boted it said that it was not able to restore to an earlier date because some files maybe corrupted. Said to restate the computer and trying restoring again. I did but had same results. Any restore date I pick, it says it is unable to restore.
I have Windows XP. WHen I try to use "system restore", I keet getting a message that say that I cannot restore to the restore point I chose. I followed the instructions, and only choose restore points that are bolded.
i've been trying to do a system restore (manually, it's not like the system is doing it on his own), but in the end when it's supposed to show the message of having finished the process, it always says that the system couldn't be restored. I've tryied several restoration points, but no matter how different or how far it just won't do.
I have a Dell 2400 with Windows XP. I have used "System Restore" several times in the past with good results. The last several days I have been trying to use same and go back at least a month, but when I click on the arrow to to the left side of the restore box to go to the previous month it will not do same, nor will it go to the next month when I click on the right side arrow. I need to restore and see if it will correct a problem I am having with Links 2003
anyone else have problems getting system restore to work at all? When I try it , I get a message saying something similiar to cannot be restored and no changes have been made. This happens no matter how far back I go. Had my computer (DEll) 2 or3 yrs with windows home edition.
I have a toshiba laptop A105 sieries. I got a real nasty worm and could not get rid of it.I then stuck in the restore disc and did a complete erase of my harddrive. I am now trying to install the operating system off of the restore disc and I am not able to. Can someone please help me. I have went into the bios and set it to boot from dvd rom but then all it does is say recovering. 32 min later when it is done I try to boot from hard drive it ask me if I want to start windows normally. I select it and then nothing happens. I go back to bios and it says bood from hard drive but no go. If I go back into bios and have it boot from the recover disc it's the same thing all over. I don't know what I am doing and am a little confused no, really confused.
It's clear that System Restore does not simply put down a given Registry of a Restore Point instead of one in existence. Before this System Restore examines for compatibility the coming Registry and established programmed. Sometimes System Restore adjusts them, makes some corrections and informs user about this. But in a complicate situation System Restore cannot make corrections and refuses to put Restore Point down.Where can I read about:
1) What does System Restore control specifically?
2) In which situation specifically does System Restore refuse to put Restore Point down?
3) Is it possible to exclude these testings from System Restore?
My system restore is no longer creating any restore points, I have to do it manually. About 3 weeks ago I had a virus that I believe I got rid of using HiJackThis. That virus shut off my system restore so that it could not be used and at that time I lost all my restore points. Now my computer seems fine except for the system is not creating any NEW restore points.
Is it possible to get rid of the backed up files that System Restore uses to restore. Is this confusing? Would just turning off System Restore and turning it on again get rid of the files System Restore uses as the 'old' files? What would work if thats not the case. Should I make myself clearer or do you get it.
The System Restore service has been suspended because there is not enough disk space available on the drive \?Volume{e01463d0-1a8a-11d6-affd-806d6172696f}. System Restore will automatically resume service once at least 200MB of free disk space is available on the system drive."
