Stuck At Loading Personal Settings - Cd Boot HD Not Found

Feb 13, 2008

I am having a major problem logging into windows. When I get to the log on screen, and click my user name (the only one available) it gets stuck on "loading personal settings".My first reaction was to boot from CD, at which point I could not get my USB keyboard to work during the boot which made it impossible to "hit any key to boot from CD", so I fixed that by plugging the keyboard into the default keyboard port with an adaptor.
When I managed to boot from CD, I tried to do a repair install and got the message "Setup cannot find Hard disks bla bla cannot continue, windows will restart".

View 1 Replies


ADVERTISEMENT

Stuck On Loading Your Personal Settings

Jul 24, 2008

I am running Windows 2000 Pro and it was working just fine yesterday. This morning I go to turn it on and it's stuck on the loading your personal settings screen. It acts like it's about to load and than it restarts and does the same thing over and over.I did read somewhere that it probably has to do with a corrupted file in my settings...but since I'm the only one who uses the computer I don't have it set up to have more than one account setting. I can't even go into safe mode..the same thing happens. I did try to go to last known good configuration and that didn't do anything. It there a way I can log on without loading my personal settings? I can't think of anything I did yesterday that would cause this problem except that I ran a spy ware scan with SpyBot and it deleted a few bad things. I also don't have a Windows boot CD since my computer was built by someone and he didn't give me the CD.

View 5 Replies View Related

Boot Freezes At "Loading Your Personal Settings"

Sep 13, 2005

Most of the time my XP Pro Sp2 system freezes upon booting and will not get past the "Loading Your Personal Settings" screen. I can do a hard restart two or three times and encounter the same thing. However, I can boot into the desktop in Safe Mode, and when I restart after that everything is normal.I'm booting into an administrator account, using the welcome screen with no password, and loading very little upon startup, basically Norton AV and Firewall, that's it.No virii, no spyware, no trojans, etc. All hardware diagnostics perfect

View 1 Replies View Related

Loading Personal Settings Takes Too Much Time

Dec 6, 2008

I've recently developed this problem with a slow startup time. Everything else loads at a decent speed, but when it gets to 'Loading Your Personal Settings' it hangs for 2 - 3 minutes.

I'm willing to post more details if necessary.

View 11 Replies View Related

Unable To Login To System: Stops On Loading Personal Settings?

Jan 13, 2009

I have windows XP Professional edition with Service pack 2 I am not able to login to windows..on login screen when I enter my password it shows Loading Presonal Settings..after that Logging off and again Login screen.

View 5 Replies View Related

Boot Up Just Gets Stuck On The Loading Screen

May 24, 2006

My brother's computer froze so the only way i knew to turn it off was to uplug the power.. I did that and ever since then i cannot get the computer to boot up all the way it just gets stuck on the xp loading screen.. Ive tried starting in safe mode, normal mode, and "last know configuration that worked" mode.. When i boot from my boot disk i get into the window's console, i try and choose the repair option, when it lets me do this it asks for a "administrator password", i dont remeber using one when i installed windows. I know the "quick" fix is to do a complete reformat and install, but my brother has alot of work files that he does not want to loose. This is my brother's computer, i always make a backup disk of my files for this reason.. but he didnt so im stuck betweena rock and a hard place.

View 1 Replies View Related

Startup Error For Personal User Settings

Aug 11, 2008

This has been an intermittent problem but becoming more constant. When I log in with my password (I am the only user on computer), if the hour glass doesn't come up immediately after pressing "enter", the computer then loads with the default profile settings instead of my own. If I immediately restart the computer (either after if is loaded or I shut down the computer while it is loading), I can log in & my user settings load properly. When this problem occurs, occasionally a window will pop-up after I enter my password at log-in, with something to the effect of user environment, personal settings unable to load due to insufficient memory. Also I do not know if this is related, but when I try to error check & is scheduled to start when the computer restarts, it usually states that it has been canceled after I have restarted the computer & doesn't go into a full scan. The reason I say that this might be related is that this is also an intermittent problem & seems to only occur when I'm having above problem (which is usually what prompts me to want to check scan). At other times, it seems to work okay. I have an HP dv8135 laptop, winXP media edition sp3, AMD 64, 2 GB RAM, ATI Mobility Radeon Xpress 200 (with updated driver), TrendMicroPro 2008, & Acronis True Image 11.

View 13 Replies View Related

Loading Settings Saving Settings Startup

Sep 11, 2004

I'm having a major problem with XP Home Edition. When I start my computer, I get the Loading Settings screen, which automatically switches to the Saving Settings screen and then goes back to Loading Settings, Saving Settings, etc, etc, (the "Windows XP Startup" and "Windows XP Shutdown" sounds repeat themselves one right after the other). By the way, I have the XP tweak that skips the Welcome and log on screens at startup since I'm the only person that uses the computer. I've tried Debugging, Safe Mode with Command Prompt, Restore To Last Working Settings and a few others, but nothing is working. I ran Spybot just before shutting down the computer the last time it worked and got the "Congratulations! Your system contains no spyware" message. When I restarted the computer, I started having this problem. I also have Norton Anti Virus 2004 and did a Live Update (manually) a few hours before this started happening.

View 14 Replies View Related

Stuck On Loading Screen

Jan 19, 2005

A few weeks ago, I was having virus problems on my computer, along with various other problems, such as Norton not working. One of these problems was that I would boot up my computer, and it would be stuck on the Windows XP loading screen with the little green bar forever and would not load the user screen. However, I could get the computer to boot up in Safe Mode with Networking and could get just about everything to work fine. Thinking that the problem with loading was a virus that had erased some of my system files, I reinstalled Windows and reinstalled Norton correctly along a Sygate firewall. Everything was running fine, I was running Spybot and Ad-aware every day and a full system scan weekly, but today, I started having the loading problem again. I have no idea where to start fixing it. I am currently running Safe Mode with Networking, so I can use the internet and most of my other programs, but I want Normal mode back for obvious reasons.

View 1 Replies View Related

Stuck Folder Settings

Apr 28, 2008

I have hidden folders on my computer that I want to view. The odd thing is that it is already selected as view hidden folders in the folder options menu. No matter how I change the settings it is stuck on show hidden files, but it does not show them. I have also tried to restore defaults and it sets it to show hidden files. I pretty sure that show hidden files is not the default.

View 7 Replies View Related

Stuck On Blue Loading Screen

Jul 5, 2005

Yesterday, I acquired the "istsvc" spyware, and could not get rid of it. I ran an anti-spyware program, and it said it would run again when I restarted my computer to finish the job. I restarted my computer, and it never finished booting. It goes to the black screen with the Windows logo and the blue scrolling line just fine. Then it goes to the light blue screen with the dark blue borders and the words Microsoft Windows XP in the middle, and just stops. I know it is not frozen because there is a mouse pointer on-screen that I can still move. It stops at this same point no matter what mode I try to load in. I am using XP Home SP2.

View 3 Replies View Related

WinMCE - Stuck On Loading Screen

Mar 22, 2007

Last night my roomate was using my computer and kicked my surge protector off. The result was my computer wouldnt boot up. I played with it for a couple of minutes turning it on and off. Finally I opened the case and blew any dust out and tightened a few connectors. Turned it back on again and it seemed to boot up normally. I logged into my account and the desktop started to load up. The icons began coming up and then it froze. Control + Alt +Del would not work. So I manually turned the computer off. I attempted to boot up again and this time when I typed in my password I got stuck on a "Loading Preferences" screen. I attempted turning the computer on and off a few times hoping XP was just having an XP moment. Not the case. Next I tried booting in various safe modes. Right now I'm in Safe Mode with Network and it works perfectly. I tried to restore to a last known setting, didn't help. I did it both via the list after hitting F8 and within safemode. I played around with some account settings and now have it so I don't have to type in a password when logging in.

I tried booting up again, and now I'm stuck on the "Windows Welcome" screen. Its terrible. I've done virus and adware scans. Nothing has helped. Right now I don't know what else to do. I'm not sure if I have the actual WinXP MCE CD. I have to search for it, but I'm fairly sure it did not ship out with the computer. Obviously the next step would be to reload Windows and hope it repairs the problem. Otherwise I will obviously have to reformat. Basically I'm looking for any suggestions other than those two that may solve this problem. My computer settings should be listed below.

View 10 Replies View Related

Won't Install - Stuck When Loading Files

Sep 21, 2010

I made a computer from my brother, with parts from other computers. But windows won't install. When I put the CD in the drive, I will start the computer using the CD. It check my Hardware configuration and asks me to install a non-windows SCSI/RAID driver, I will not install this driver and I'm continueing as normal. This is when it goes wrong: when loading 'Windows Executive' (The first file it loads) the computer gets stuck.

View 3 Replies View Related

Stuck At Loading Screen And Booting From CD

Oct 31, 2009

My problem is that whenever I boot up my loading screen for Windows XP will stop, and it wont ever go again. (I left it on over night to make sure). Now I've had this problem before and I fixed it with putting in the Installation CD and hitting setup Windows XP then repairing my Windows XP. After that I wouldnt lose all my files but I would have to go through this annoying 30-45 min setup every time.

View 3 Replies View Related

Computer Stuck In Loading Screen

Sep 14, 2006

I recently got a new PC that I built up myself, and I could run it perfectly until I was going to start XP for the first time. After that it was finished installing Windows XP Professional, it rebooted and I got this XP loading screen. Now is the problem, it's stuck there forever with this loading thing moving and moving in an endless loop. What could be the problem? I hope it's nothing hardware related as they are all new.

View 14 Replies View Related

Computer Stuck At Loading Screen

Aug 15, 2008

Today I turned on my computer and Windows won't load. It just stops at the loading screen (the one with the Windows logo and blue loading bar). The bar just stops moving.I can load Windows in Safe Mode, and I tried scanning for viruses (0) and spyware (5) - but it didn't help.I didn't install anything new and haven't changed any setting. The only thing is that I turned my computer on while there was a CD in the drive. I took it out but it didn't help.

View 4 Replies View Related

Computer Stuck At Loading Screen

Jan 31, 2010

I had a power supply die out of nowhere on me about a month ago. Last night I replaced it, and when starting up my computer I was given the option to boot windows normally, in safe mode, or in my last known configuration. Any of these options take me to the black screen with the windows logo and the blue loading bar, as usual. However, I am stuck at this screen. I've never encountered this, what do you think could be the problem?

View 1 Replies View Related

2000 Stuck On Loading Screen

Apr 18, 2007

I tried starting pc and all was hunky dory until Win200Pro hit the starting Windows loading screen (you know the one with the logo and blue squares loader at the bottom). It stays there for ages, never loading Windows.So far I've tried:Recovery console.Repair Windows.fixmbr.fixboot.Windows Setup (selecting the Repair option in there)changed mouse and keyboard just in case all the above mentioned solutions failed.Not sure if anyone has any ideas. It would be very much appreciated. I'm trying to avoid having to format and reinstall as some setup data for the company's software will be lost.As far as i know no software or hardware have been recently installed on that pc and the person using it doesn't really surf on the internet.

View 1 Replies View Related

Could Not Load Stuck On Loading Screen

Oct 22, 2008

Recently I installed a new hard drive on my sisters PC. I wanted her to be able to go straight to the desktop after loading and not get the log in screen. so I went to start, run and typed (I think) userpasswords2 or something like that and unchecked the box about passwords being allowed or something. (I found a site that explained how to do it)anyway, now when I try to start up the PC, it gets all the way to the desktop and then super fast an error message comes up that says "Windows could not load." and I can't read the rest because a new screen appears over the top of it that says "Windows is loading" but it stays there for hours and never loads.

View 2 Replies View Related

Stuck In Loading Desktop And Wall Paper

Dec 29, 2008

I was working when my system seemed to go a bit crazy, bunch of windows opened up and told me that my virus protection was not working etc.. I closed them all and ran a quick scan with Symtec to see if I had somehow picked up a virus. Decided to reboot. When I restarted the computer I had this strange circle going on. It goes thru a normal bootup, and when it is loading the tray, it starts going in a circle. Starts loading up programs and then restarts and then restarts etc. Most of the time, after 3 or 4 times it ends with just the wall paper visable. Now, at this point the computer seems ok, I can run most any program by starting them in Task Manager ( applications, new task etc...). In fact that is how I signed up for this forum and wrote the note. BUT I cannot get the desktop back. The only way is to run Windows Explorer, via task manager, then you get it back, but it does the circle thing continously. IF you can get a program started during the part of the circle where icons etc are visable, then it will run. SO, I tried doing a restore, went back one day and ran the restore. Seemed to run normally. BUT the symptoms are the same ( now it was close to midnight, so I should have gone back farther). NOW, when I tried to go and do another restore, to go back farther, the restore program runs normally, except it will not let me choose a day. Shows many possible days and the help runs etc.. the buttons "push" but nothing happens.

View 6 Replies View Related

Stuck Loading Screen After HD Install On Older Inspiron

Feb 2, 2009

Let me quickly start by noting that I have familiarized and comprehensively searched every forum for assistance on this issue, and have attempted multiple fixes for the following problem. That said, if anyone absolutely knows what my problem is, and if is addressed elsewhere, please direct me. If not, thank you VERY MUCH in advance for your help!History: 30 GB HD filled up on Fiance's Inspiron 1100. I purchased a compatible 60 GB HD, enclosure, and then I cloned the original HD to the larger one.Then, after restarting the computer with the original drive still in the case, the computer failed to boot. So, after attempting to fix the original boot issue, I physically installed the new, 60 GB HD with the cloned drive on it. The computer fired right up. I was elated. Then I ran defrag. Not a good Idea.Defrag crashed at about 40% complete. I attempted to reboot the computer, to no avail. The computer seems to boot fine, but then gets stuck permanently at the Windows XP loading screen. The loading bar moves, the mouse moves, yada yada. Nothing else. I CAN boot in safe mode, and access all my files (which i DID backup first). However, I want the damn thing to work, considering I just bought the new HD and the computer otherwise worked just fine.I ran CHKDSK from the recovery console, which found errors, but did no good. Then I ran CHKDSK /r, which took about 24 hours to complete. Errors found, some "unrecoverable," to no avail.I cannot access my system startup BIOS w/F2 (or any other key) during startup, no matter how early i start to tap the key. That is strange to me. Thus, I cannot boot from the XP CD.What do you all think my options are? The HD is physically OK, I think. The fact that safemode seems to function pretty flawlessly is a good sign, right?
I have read to use bartPE to correct the registry. I have read to reinstall (?) the BIOS. I am ready to re-format the HD and re-install XP, but I'm not sure how to do this, or if I can do this via DOS or the recovery console, as again, I cannot access the system startup settings to change the boot sequence.Again, at this point, is there a way to fix this? If not, can I sweep off the HD and re-install XP? How might I do that?

View 3 Replies View Related

Stuck At Loading Screen Safemode Doesn't Work

May 31, 2008

I'm pretty sure I had a trojan or something cause my computer kept getting worse. I tried several scanning programs but none of them cleared it up completely.Anyway, now I can't even get past the windows loading screen, and if I try to log in through safe mode, I get stuck at the screen that says "SyS.multidisk" or something.Is there any way that I can log in dos mode or something and completely wipe my system clean and reinstall windows xp? I don't have the disk, it came with windows XP already on it. I don't care if I lose all my files, I just want a working computer again, free of any trojans or anything.So, can I somehow log in dos mode or something (I don't even know how to do that), wipe everything clean, including whatever virus screwed up my comp, and reinstall windows XP without the disk? I'm assuming I have a copy of windows XP saved on my hard drive or something, cause my computer came with windows XP already installed and they didn't give me a disk.

View 4 Replies View Related

Stuck Loading Screen After HD Install On Older Inspiron 1100

Feb 3, 2009

Let me quickly start by noting that I have familiarized and comprehensively searched every forum for assistance on this issue, and have attempted multiple fixes for the following problem. That said, if anyone absolutely knows what my problem is, and if is addressed elsewhere, please direct me. If not, thank you VERY MUCH in advance for your help!History: 30 GB HD filled up on Fiance's Inspiron 1100. I purchased a compatible 60 GB HD, enclosure, and then I cloned the original HD to the larger one.Then, after restarting the computer with the original drive still in the case, the computer failed to boot. So, after attempting to fix the original boot issue, I physically installed the new, 60 GB HD with the cloned drive on it. The computer fired right up. I was elated. Then I ran defrag. Not a good Idea.Defrag crashed at about 40% complete. I attempted to reboot the computer, to no avail. The computer seems to boot fine, but then gets stuck permanently at the Windows XP loading screen. The loading bar moves, the mouse moves.I can boot in safe mode, and access all my files (which i DID backup first). However, I want the damn thing to work, considering I just bought the new HD and the computer otherwise worked just fine.I ran CHKDSK from the recovery console, which found errors, but did no good. Then I ran CHKDSK /r, which took about 24 hours to complete. Errors found, some "unrecoverable," to no avail.I CANNOT access my system startup BIOS w/F2 (or any other key) during startup, no matter how early i start to tap the key. That is strange to me. Thus, I cannot boot from the XP CD.What do you all think my options are? The HD is physically OK, I think. The fact that safemode seems to function pretty flawlessly is a good sign, right?I have read to use bartPE to correct the registry. I have read to reinstall (?) the BIOS. I am ready to re-format the HD and re-install XP, but I'm not sure how to do this, or if I can do this via DOS or the recovery console, as again, I cannot access the system startup settings to change the boot sequence.Again, at this point, is there a way to fix this? If not, can I sweep off the HD and re-install XP? How might I do that?

View 6 Replies View Related

Stuck In Endless Circle Loading Desktop And Wall Paper

Dec 29, 2008

I believe there has been a small HD problem, the result is that when I boot up, it goes thru normally till it loads the desktop. The wall paper shows up and it starts loading the tray with its programs. During that load, it stop, re-loads the wall paper and starts loading the tray again... sometimes it stops and just has the wall paper up with no icons. When in this state, you can run any program by bringing up task manager and running it in "applications" "new task". I have found that I can run almost any program by getting to the "start" menu fast enough during the time it is loading.I have run a chkdsk in read only mode and it reports errors during phase 2. I can put the PC into the "circle" mode if it is sitting still with the wallpaper by running Windows Explorer. I have tried doing a system restore, went back one day and it seemed to restore, but nothing changed - and - now I cannot do another restore. It shows restore points as available, but when I press on their date nothing happens. The rest of the restore programs responds normally.I hesitate to run chkdsk in repair mode since it might leave the computer useless and it is the way I am writing for this help ! I assume there are some sectors that include WINXp that are bad. It all started while I was online and the PC went a little nuts, I shut it down after a quick scan with Symantec anti virus ( thinking I may have picked up a baddie). The scan showed nothing. The symptoms started on the first reboot.

View 4 Replies View Related

Personal Guard Spywareinfected My OS - PC Will Not Boot!

Nov 4, 2009

a Dell XPS 400 w/ Windows XP Media Edition, became infected with Personal Guard spyware.....Tried to remove with MalWare Bytes but it wouldn't let me get to the .exe file for it.... Tried deleting the files, and registry data for it....still didn't work....Finally the machine shut down and now wil not boot up..... The Dell POST screen loads, but then it sticks trying to load Windows.

View 10 Replies View Related

Re-instate Personal Setting On Boot Up?

Sep 23, 2010

I've lost my user profile settings on booting up my computer in windows xp pro. Now it loads the packard bell desktop instead of my own. How do I get it back to the way it was

View 4 Replies View Related

Mode To Boot Up Personal Computer

Aug 31, 2006

My daughter shut the power off during shutdown.Now the Personal Computer won't reboot. The screen comes up asking what mode you want to boot up in.No matter what you select it loops back.The Personal Computer is a Gateway with Windows XP Media.It didn't come with recovery cds, only blank ones to make your own.I just got off the phone with CS and they are sending me recovery cds but it will take about a week to get.Is there any other way to fix this without using the recovery cds ?

View 14 Replies View Related

Getting Message Of Error Loading / Specified Module Not Found?

Dec 29, 2007

Error loading C:Windowssystem. gvnficb.dll the specified module could not be found

View 1 Replies View Related

Missing/corrupt File - Can't Boot - Need To Save Personal Files

Sep 26, 2005

I'm getting a WINDOWSSYSTEM32CONFIGSYSTEM message all of a sudden!DESPERATELY need to copy some personal files somewhere before trying to restore / reformat

View 7 Replies View Related

Error Loading CMICNFG3.CPL RUNDLL / Specified Module Not Found?

Mar 8, 2005

Running windows XP operating system.I am getting a message which states Error loading CMICNFG3.CPL RUNDLL This specific module could not be found.

View 5 Replies View Related

Account Is Gone - Loading Your Settings Message

Dec 15, 2005

I've got a problem with my xp... when i started it up earlier, i entered my password clicked enter and it displayed the 'loading your settings' message. It was stuck on this screen for a while so i pressed Ctrl+alt+del and it loaded in.. Only problem was it loaded, but not into my account. It was like my pc was when i first got it, default settings, none of my files ect.. (however it did have a few of the games i had on my pc before), I re booted my pc and again i entered the password, again it didn't load so i hit ctrl+alt+del and it loaded . However this time a message appeared saying something about my account and it had 'created a tempory one'..?

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved