I tried starting pc and all was hunky dory until Win200Pro hit the starting Windows loading screen (you know the one with the logo and blue squares loader at the bottom). It stays there for ages, never loading Windows.So far I've tried:Recovery console.Repair Windows.fixmbr.fixboot.Windows Setup (selecting the Repair option in there)changed mouse and keyboard just in case all the above mentioned solutions failed.Not sure if anyone has any ideas. It would be very much appreciated. I'm trying to avoid having to format and reinstall as some setup data for the company's software will be lost.As far as i know no software or hardware have been recently installed on that pc and the person using it doesn't really surf on the internet.
A few weeks ago, I was having virus problems on my computer, along with various other problems, such as Norton not working. One of these problems was that I would boot up my computer, and it would be stuck on the Windows XP loading screen with the little green bar forever and would not load the user screen. However, I could get the computer to boot up in Safe Mode with Networking and could get just about everything to work fine. Thinking that the problem with loading was a virus that had erased some of my system files, I reinstalled Windows and reinstalled Norton correctly along a Sygate firewall. Everything was running fine, I was running Spybot and Ad-aware every day and a full system scan weekly, but today, I started having the loading problem again. I have no idea where to start fixing it. I am currently running Safe Mode with Networking, so I can use the internet and most of my other programs, but I want Normal mode back for obvious reasons.
Yesterday, I acquired the "istsvc" spyware, and could not get rid of it. I ran an anti-spyware program, and it said it would run again when I restarted my computer to finish the job. I restarted my computer, and it never finished booting. It goes to the black screen with the Windows logo and the blue scrolling line just fine. Then it goes to the light blue screen with the dark blue borders and the words Microsoft Windows XP in the middle, and just stops. I know it is not frozen because there is a mouse pointer on-screen that I can still move. It stops at this same point no matter what mode I try to load in. I am using XP Home SP2.
Last night my roomate was using my computer and kicked my surge protector off. The result was my computer wouldnt boot up. I played with it for a couple of minutes turning it on and off. Finally I opened the case and blew any dust out and tightened a few connectors. Turned it back on again and it seemed to boot up normally. I logged into my account and the desktop started to load up. The icons began coming up and then it froze. Control + Alt +Del would not work. So I manually turned the computer off. I attempted to boot up again and this time when I typed in my password I got stuck on a "Loading Preferences" screen. I attempted turning the computer on and off a few times hoping XP was just having an XP moment. Not the case. Next I tried booting in various safe modes. Right now I'm in Safe Mode with Network and it works perfectly. I tried to restore to a last known setting, didn't help. I did it both via the list after hitting F8 and within safemode. I played around with some account settings and now have it so I don't have to type in a password when logging in.
I tried booting up again, and now I'm stuck on the "Windows Welcome" screen. Its terrible. I've done virus and adware scans. Nothing has helped. Right now I don't know what else to do. I'm not sure if I have the actual WinXP MCE CD. I have to search for it, but I'm fairly sure it did not ship out with the computer. Obviously the next step would be to reload Windows and hope it repairs the problem. Otherwise I will obviously have to reformat. Basically I'm looking for any suggestions other than those two that may solve this problem. My computer settings should be listed below.
My brother's computer froze so the only way i knew to turn it off was to uplug the power.. I did that and ever since then i cannot get the computer to boot up all the way it just gets stuck on the xp loading screen.. Ive tried starting in safe mode, normal mode, and "last know configuration that worked" mode.. When i boot from my boot disk i get into the window's console, i try and choose the repair option, when it lets me do this it asks for a "administrator password", i dont remeber using one when i installed windows. I know the "quick" fix is to do a complete reformat and install, but my brother has alot of work files that he does not want to loose. This is my brother's computer, i always make a backup disk of my files for this reason.. but he didnt so im stuck betweena rock and a hard place.
My problem is that whenever I boot up my loading screen for Windows XP will stop, and it wont ever go again. (I left it on over night to make sure). Now I've had this problem before and I fixed it with putting in the Installation CD and hitting setup Windows XP then repairing my Windows XP. After that I wouldnt lose all my files but I would have to go through this annoying 30-45 min setup every time.
I recently got a new PC that I built up myself, and I could run it perfectly until I was going to start XP for the first time. After that it was finished installing Windows XP Professional, it rebooted and I got this XP loading screen. Now is the problem, it's stuck there forever with this loading thing moving and moving in an endless loop. What could be the problem? I hope it's nothing hardware related as they are all new.
Today I turned on my computer and Windows won't load. It just stops at the loading screen (the one with the Windows logo and blue loading bar). The bar just stops moving.I can load Windows in Safe Mode, and I tried scanning for viruses (0) and spyware (5) - but it didn't help.I didn't install anything new and haven't changed any setting. The only thing is that I turned my computer on while there was a CD in the drive. I took it out but it didn't help.
I had a power supply die out of nowhere on me about a month ago. Last night I replaced it, and when starting up my computer I was given the option to boot windows normally, in safe mode, or in my last known configuration. Any of these options take me to the black screen with the windows logo and the blue loading bar, as usual. However, I am stuck at this screen. I've never encountered this, what do you think could be the problem?
Recently I installed a new hard drive on my sisters PC. I wanted her to be able to go straight to the desktop after loading and not get the log in screen. so I went to start, run and typed (I think) userpasswords2 or something like that and unchecked the box about passwords being allowed or something. (I found a site that explained how to do it)anyway, now when I try to start up the PC, it gets all the way to the desktop and then super fast an error message comes up that says "Windows could not load." and I can't read the rest because a new screen appears over the top of it that says "Windows is loading" but it stays there for hours and never loads.
When I turn on my computer, everything seems to be going fine... the manufacturer's screen comes up, then the screen that shows Windows is loading, then it kindof gets stuck between the loading screen and the welcome screen. It just goes black. The hard drive will run continually as if it's searching for the rest of the information, but can't find it.
Let me quickly start by noting that I have familiarized and comprehensively searched every forum for assistance on this issue, and have attempted multiple fixes for the following problem. That said, if anyone absolutely knows what my problem is, and if is addressed elsewhere, please direct me. If not, thank you VERY MUCH in advance for your help!History: 30 GB HD filled up on Fiance's Inspiron 1100. I purchased a compatible 60 GB HD, enclosure, and then I cloned the original HD to the larger one.Then, after restarting the computer with the original drive still in the case, the computer failed to boot. So, after attempting to fix the original boot issue, I physically installed the new, 60 GB HD with the cloned drive on it. The computer fired right up. I was elated. Then I ran defrag. Not a good Idea.Defrag crashed at about 40% complete. I attempted to reboot the computer, to no avail. The computer seems to boot fine, but then gets stuck permanently at the Windows XP loading screen. The loading bar moves, the mouse moves, yada yada. Nothing else. I CAN boot in safe mode, and access all my files (which i DID backup first). However, I want the damn thing to work, considering I just bought the new HD and the computer otherwise worked just fine.I ran CHKDSK from the recovery console, which found errors, but did no good. Then I ran CHKDSK /r, which took about 24 hours to complete. Errors found, some "unrecoverable," to no avail.I cannot access my system startup BIOS w/F2 (or any other key) during startup, no matter how early i start to tap the key. That is strange to me. Thus, I cannot boot from the XP CD.What do you all think my options are? The HD is physically OK, I think. The fact that safemode seems to function pretty flawlessly is a good sign, right? I have read to use bartPE to correct the registry. I have read to reinstall (?) the BIOS. I am ready to re-format the HD and re-install XP, but I'm not sure how to do this, or if I can do this via DOS or the recovery console, as again, I cannot access the system startup settings to change the boot sequence.Again, at this point, is there a way to fix this? If not, can I sweep off the HD and re-install XP? How might I do that?
I'm pretty sure I had a trojan or something cause my computer kept getting worse. I tried several scanning programs but none of them cleared it up completely.Anyway, now I can't even get past the windows loading screen, and if I try to log in through safe mode, I get stuck at the screen that says "SyS.multidisk" or something.Is there any way that I can log in dos mode or something and completely wipe my system clean and reinstall windows xp? I don't have the disk, it came with windows XP already on it. I don't care if I lose all my files, I just want a working computer again, free of any trojans or anything.So, can I somehow log in dos mode or something (I don't even know how to do that), wipe everything clean, including whatever virus screwed up my comp, and reinstall windows XP without the disk? I'm assuming I have a copy of windows XP saved on my hard drive or something, cause my computer came with windows XP already installed and they didn't give me a disk.
Let me quickly start by noting that I have familiarized and comprehensively searched every forum for assistance on this issue, and have attempted multiple fixes for the following problem. That said, if anyone absolutely knows what my problem is, and if is addressed elsewhere, please direct me. If not, thank you VERY MUCH in advance for your help!History: 30 GB HD filled up on Fiance's Inspiron 1100. I purchased a compatible 60 GB HD, enclosure, and then I cloned the original HD to the larger one.Then, after restarting the computer with the original drive still in the case, the computer failed to boot. So, after attempting to fix the original boot issue, I physically installed the new, 60 GB HD with the cloned drive on it. The computer fired right up. I was elated. Then I ran defrag. Not a good Idea.Defrag crashed at about 40% complete. I attempted to reboot the computer, to no avail. The computer seems to boot fine, but then gets stuck permanently at the Windows XP loading screen. The loading bar moves, the mouse moves.I can boot in safe mode, and access all my files (which i DID backup first). However, I want the damn thing to work, considering I just bought the new HD and the computer otherwise worked just fine.I ran CHKDSK from the recovery console, which found errors, but did no good. Then I ran CHKDSK /r, which took about 24 hours to complete. Errors found, some "unrecoverable," to no avail.I CANNOT access my system startup BIOS w/F2 (or any other key) during startup, no matter how early i start to tap the key. That is strange to me. Thus, I cannot boot from the XP CD.What do you all think my options are? The HD is physically OK, I think. The fact that safemode seems to function pretty flawlessly is a good sign, right?I have read to use bartPE to correct the registry. I have read to reinstall (?) the BIOS. I am ready to re-format the HD and re-install XP, but I'm not sure how to do this, or if I can do this via DOS or the recovery console, as again, I cannot access the system startup settings to change the boot sequence.Again, at this point, is there a way to fix this? If not, can I sweep off the HD and re-install XP? How might I do that?
I made a computer from my brother, with parts from other computers. But windows won't install. When I put the CD in the drive, I will start the computer using the CD. It check my Hardware configuration and asks me to install a non-windows SCSI/RAID driver, I will not install this driver and I'm continueing as normal. This is when it goes wrong: when loading 'Windows Executive' (The first file it loads) the computer gets stuck.
I am running Windows 2000 Pro and it was working just fine yesterday. This morning I go to turn it on and it's stuck on the loading your personal settings screen. It acts like it's about to load and than it restarts and does the same thing over and over.I did read somewhere that it probably has to do with a corrupted file in my settings...but since I'm the only one who uses the computer I don't have it set up to have more than one account setting. I can't even go into safe mode..the same thing happens. I did try to go to last known good configuration and that didn't do anything. It there a way I can log on without loading my personal settings? I can't think of anything I did yesterday that would cause this problem except that I ran a spy ware scan with SpyBot and it deleted a few bad things. I also don't have a Windows boot CD since my computer was built by someone and he didn't give me the CD.
I was working when my system seemed to go a bit crazy, bunch of windows opened up and told me that my virus protection was not working etc.. I closed them all and ran a quick scan with Symtec to see if I had somehow picked up a virus. Decided to reboot. When I restarted the computer I had this strange circle going on. It goes thru a normal bootup, and when it is loading the tray, it starts going in a circle. Starts loading up programs and then restarts and then restarts etc. Most of the time, after 3 or 4 times it ends with just the wall paper visable. Now, at this point the computer seems ok, I can run most any program by starting them in Task Manager ( applications, new task etc...). In fact that is how I signed up for this forum and wrote the note. BUT I cannot get the desktop back. The only way is to run Windows Explorer, via task manager, then you get it back, but it does the circle thing continously. IF you can get a program started during the part of the circle where icons etc are visable, then it will run. SO, I tried doing a restore, went back one day and ran the restore. Seemed to run normally. BUT the symptoms are the same ( now it was close to midnight, so I should have gone back farther). NOW, when I tried to go and do another restore, to go back farther, the restore program runs normally, except it will not let me choose a day. Shows many possible days and the help runs etc.. the buttons "push" but nothing happens.
I am having a major problem logging into windows. When I get to the log on screen, and click my user name (the only one available) it gets stuck on "loading personal settings".My first reaction was to boot from CD, at which point I could not get my USB keyboard to work during the boot which made it impossible to "hit any key to boot from CD", so I fixed that by plugging the keyboard into the default keyboard port with an adaptor. When I managed to boot from CD, I tried to do a repair install and got the message "Setup cannot find Hard disks bla bla cannot continue, windows will restart".
I believe there has been a small HD problem, the result is that when I boot up, it goes thru normally till it loads the desktop. The wall paper shows up and it starts loading the tray with its programs. During that load, it stop, re-loads the wall paper and starts loading the tray again... sometimes it stops and just has the wall paper up with no icons. When in this state, you can run any program by bringing up task manager and running it in "applications" "new task". I have found that I can run almost any program by getting to the "start" menu fast enough during the time it is loading.I have run a chkdsk in read only mode and it reports errors during phase 2. I can put the PC into the "circle" mode if it is sitting still with the wallpaper by running Windows Explorer. I have tried doing a system restore, went back one day and it seemed to restore, but nothing changed - and - now I cannot do another restore. It shows restore points as available, but when I press on their date nothing happens. The rest of the restore programs responds normally.I hesitate to run chkdsk in repair mode since it might leave the computer useless and it is the way I am writing for this help ! I assume there are some sectors that include WINXp that are bad. It all started while I was online and the PC went a little nuts, I shut it down after a quick scan with Symantec anti virus ( thinking I may have picked up a baddie). The scan showed nothing. The symptoms started on the first reboot.
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
I am stuck in the welcome screen on windows xp and I am hoping to find a solution that won't require me to reinstall windows as I am afraid I will lose my documents, picutures etc. I have some important things in there as far as pictures that I had not put on cd yet.
I have a dell latitude d600 laptop and i keep getting stuck at the welcome screen. not frozen, i can move the mouse cursor around but there's no options to choose from so i'm essentially stuck. i usually keep my computer in stand by and then everythings fine. but occasionally i shut down my computer and thats when i have this problem. this problem started once in a while when i started up the computer but now it happens everytime i start it up. i called a tech support number and they had me goto "start" then "run" and type in "prefetch" and over 50 files came up. the man on the phone said there should be about 7 files there.
Ive recently been putting my comp in standby every night instead of shut down, but last night I shut it down and now it wont come back!! It stays at the Windows XP loading screen. I am only able to load it into "safe mode w/ networking." The "Last settings that worked" option does not work. I have tried to restore it 3 times to 3 different dates, and all give me the same result---stuck at windows XP screen in normal mode, or loading in safe mode.
Ive recently been putting my comp in standby every night instead of shut down, but last night I shut it down and now it wont come back!! It stays at the Windows XP loading screen. I am only able to load it into "safe mode w/ networking." The "Last settings that worked" option does not work. I have tried to restore it 3 times to 3 different dates, and all give me the same result---stuck at windows XP screen in normal mode, or loading in safe mode.
Got an HP Pavilion 563w with Pentiun 2.4, and 512 MB of ram, running an oem XP. One day, I tried to start it up, and it booted to the Windows logo screen with the black bar. The bar went across twice, then froze. Nothing else happens after that. Tried Known Good Configuration, same thing. Tried safe mode, stops at mup.sys. I tried to get into Recovery console, but doesnt seem to recognize my hard drive, as my only choices are off of the CD (Drive letter e). Tried to repair system files with an XP upgrade cd, and it tells me there's no operating system installed, and that I need to verify my install by loading the installation cd, which I dont have. So I tried to use the HP system restore feature on my computer, but it only gives me the option to reformat, and not repair. I am the fool who did not regularly back up files, so I still have some on there I would like to have. I thought I could install this drive as a slave in my newer computer, but the hard drive setup in that computer is SATA, and my problem child is an IDE drive. I did not install anything new (hardware or software) that I can remember in the days before it went south.
My PC has developed a problem and I'm looking a solution. What I'm seeing is that when I boot my PC, it gets to the splash screen and I see the scroller moving but that's it. No color changes no BSOD, etc. At this point, I've been able to restore my system using an Acronis full system recovery but I would like to know what's going on behind the scenes when the progress bar moves but nothing.
I have a Dell inspiron 530s.Yesterday I ran an spyware doctor scan on my PC went to the shower and when I came back 30 minute's later the system had froze.I could not do anything so I turnt the PC off and rebooted.However when it rebooted it would not go past the Dell screen,that come's up straightaway,and the F12 and F2 key's are unusable as nothing whatsoever work's.I have tried rebooting taking out all connected thing's ie mouse speakers and wireless dongles,turnt it off for an hour and still nothing work's.All light's are on,monitor work's but the only thing that seem's to be missing is the light's on the keyboard num lock etc.
My XP desktop only shows my wallpaper. I can open programs using Task Manager.I can't run sfc / scannow from task manager - it just flickers a square box and disappears. Nothing changes. It won't run. It won't let me open any antivirus program.
I am new here and was not able to find any thing similar to my problem. I recently installed some drivers to work with my logitech mx900 wireless mouse, I just have the mouse itself and a seperate bluetooth reciever. I could not figure out how to get it to work without connecting it every time I turn on the computer and un installed the program. Now my computer gets stuck after I press shutdown and in the blue screen where it says windows is shutting down
I threw in the XP disc to start the re-formatting, to basically re-install XP and for the past 15 hours or so (since last night) it's been stuck on the blue screen and sais "Windows is re-formatting, 33 minutes remaining" I've turned the computer on/off, and it's always lead back to that screen
it would not do anything whilst on the windows loading screen (progress bar etc worked but it got stuck on that screen and wouldn't advance), the HDD light would blink for a while and then it would just sit there. Usually i would restart until quite a while later I discovered that if i left it for long enough (about 5-10 minutes) it would eventually load. I have also performed several reformats in this time and the problem would disappear for a while then show its ugly face again. It wouldn't do this every time but a large majority of the time it would.
Instead, it would go through the loading screen, finish that, and the screen would go blank (no signal detected etc) and then it wouldn't do anything at all, I have left it sitting there for about an hour once to see if eventually would work but it didn't. So to fix this I have to restart the computer and it would come up with the screen asking me if i want to use safe mode and usually i would either choose the Last known good configuration or start up windows normally, occasionally i would go in safe mode and restart from there and it would usually work but not always.
