When I try to turn off or restart Windows XP, it hangs at the "Windows is shutting down" screen. I have rebooted in safe mode and was able to restart in safe mode. I have tried system restore and run the check disk utility without success. I checked the Event Viewer and saw 2 recurring warnings from EvntAgnt. The first is event 1003 and the second is event 1015. I have also run the free TweakNow and Eusing registry cleaners.
View 18 RepliesWorking on a laptop for one of my friends, and came across few problems I couldn't fix.When attempting to properly shutdown or restart, xp (SP2) hangs on "Saving your settings"I searched this problem and found many similar problems, but no fixes.Most sites/forums reffered the problems to SP1.When turning on the computer, after login, it hangs, then crashes (taskbar dissapears as well as desktop icons)My quickfix i've been using while removing the viruses/spyware from the machine is kill explorer.exe and restart it, this crashes many services (and viruses) that were running on the machine.it starts fine in safemode, but still doesn't restart/shutdown and I don't know how to fix it in safemode anyways.The computer is fully updated XP SP2.
View 3 Replies View RelatedMy PC won't shutdown through Windows (nor will it 'Restart' through Windows).
I'm suspecting that it's some sort of dll error
Often when I shutdown, I get the message that explorer.exe is not responding and I must hit end now to continue shutdown. This happens in safe mode as well as normal mode. Is this a problem? If so, how do I correct it. I use Windows XP and it is updated.
View 4 Replies View Relatedi just instaled win xp and office. everything works ok.just when i shutdown the computer it restart it self as if i just pushed the restart button. that is why i need each time to reset the computer.
View 1 Replies View RelatedI always met the problems when I wanted to log off/shutdown/restart Windows XP Professional. When I click log off/shutdown/restart button, nothing happened. What I can do is just press the power button 5 sec to shutdown. But that problem didn't happen every time. I met this error in a lot of computers. I think it's not a hardware problem.
View 1 Replies View RelatedI asked this on the Hardware forum, but I think its more suitable here:Whenever I try and shut my computer down, or put it into hibernate, it restarts the computer: Power button - restarts when it should turn it off Start>Turn Off Computer>Turn Off - Restarts it Hibernate - The 'Hibernating' bar reaches the end, then it restarts. When it restarts after hibernate, everything appears already loaded (just as if I had brought it out of hibernate the proper way).I have tried all the common problem, which I found on google (Such as the uatomatic restart problem), all to no effect.I have installed no new software recently, and changed no settings that I know of.
View 3 Replies View Relatedmy computer it won't shut down or restart i have verizon and it comes wit a internet security suite and it has a anitvirus on it. i wouldn't update so i uninstalled it and installed it again but when its done it says u need to restart the computer so the programs can work rite but the cmputer won't restart it jus stays there and when i hit shutdown it jus stays there too. its like my computer won't shutdown or restart when i want it to.
View 2 Replies View RelatedI just spoke to my daughter at college who is having trouble with her Acer laptop, running XP SP2, Intel Celleron, 2GB RAM, and using Zone Alarm Internet Security Suite. When she clicks "shut down" the laptop appears to shut down, but then restarts. "Restart" is not selected. I did a Google search and found a known problem with Roxio Easy CD Creator 5.0 and with Direct CD 5.0, but as best I can tell she has neither program installed (she looked in "programs" folder, and in control panel under "add and remove programs" and couldn't find either listed). I also had her right click "my computer", "properties", "advanced", "startup and recovery - settings", and uncheck the "automatically restart" box in "system failure" section. But her laptop still restarts at shutdown.
View 6 Replies View Relatedive tryed heaps of differnt drivers and the one mentioned above are the ones im running now The Actual Problem is that i set the Resoloution to 1024x786x32 bit in display and everytime i turn of the comp or restart it goes back to 640x480x8bit! the windows in an old install from a collage ! maybe this is the problemThe Settings wont stick!!! even with running comp with no Drivers?(no chipset,display) and it still reverts back to 640-480-8bit
View 2 Replies View RelatedI'm using XP home edition and for some reason my pc won't shutdown or restart. When i select turn off or restart nothing happens, it just stays at my desktop. I tried to bring up task manager and alt - F4 but still nothing happens. It just stays at my desktop. Everything else is working but it seems i cant shutdown or restart.
View 1 Replies View RelatedSometimes when I tell the computer to shut down or restart, it won't..until I make it standby and then wake it back up again and then press shut down so that it will work. How can I fix this problem?
View 3 Replies View RelatedI'm not too knowledgeable about the technical side of computing, so please bear with me.I'm running Windows XP Professional (SP2) on an AMD Athlon XP 3200+. My grandson showed me a game called Roller Coaster Tycoon 3, which I fell in love with and subsequently bought for my own computer. As I only had 'on board' graphics, the game obviously wouldn't run, so I bought an Nvidia 6200 graphics card.Following the instructions which came with it, I installed the card successfully. The only thing I couldn't do was disable the 'on board' graphics, but as my computer recognised the new card automatically, I went ahead and installed the driver.The new card didn't need an extra power source, as there was no connector on it. Incidentally, I did find the 'on board' graphics in the System > Properties list, but nothing happens when I click on it, so I assume I can't disable it.
Everything appeared to work well and I got the Roller Coaster game up and running beautifully.Some time later, after I had closed the game and gone on to other things, I needed to restart my computer, so I went through the usual restart sequence.Things went well at first but some way through the Windows XP loading screen, where the little blue bars scroll across, my computer simply switched off, totally! I tried again (obviously from a cold boot this time), but the same thing happened.To cut a long story short, I eventually removed the new card, and restored my system to a safe point, and it's now running perfectly again, although I can't play my game now.I'd be really grateful for any advice you can offer as to what the problem might be, as I want to build some more roller coasters!
I recently re-installed windows XP Pro after a clean format. I backed up all drivers from my system32 folder and used them to make sure that all drivers would still be there after the reinstall. I still have all the same programs installed (McAfee AV, ZoneAlarm Personal, Spybot, and Ad-Aware) but now when I log off I simply get the windows xp logo on the blue background screen. (The Saving Your settings, Logging, off, Windows is shutting down dialoge does not occur) I have made no hardware changes. I must also note that this does not happen all of the time, but it also isn't happening with any discernable pattern, so it's hard to narrow down what may be the cause
View 1 Replies View RelatedWhen I try to shut down or Restart my PC it hangs when it gets to the Windows is Shutting Down page & just stays there,wont go any further, the only things Ive done has been to install the latest Windows Updates which included Windows SP 2 (I have Windows updates turned on so they automatically update) & install I Tunes,
View 10 Replies View RelatedCurrently when I log onto my computer, it takes more than 5 minutes to load. I have already browsed through many threads and have minimized the number of start-up programs. It was a little better but it still wasn't like how it was before. Also, when I want to shutdown my computer, I have to wait 10 minutes before I will hear the "Windows turning-off sound" and it will shutdown. Does anyone have any clue about how to fix this?
The computer in general appears to be running smoothly once everything is loaded into the computer except for when I want to add/remove any programs where there is a huge lag after uninstalling a program! These problems started occurring about a couple days ago. I haven't been doing anything differently nor have I installed any new programs onto the new computer. I have scanned for viruses using Symantec Endpoint Protection (and no results) and also used CCleaner to clean everything else.
everytime i go to shutdown or restart my computer i get this errorthe instruction OXO28352ED REF MEMORY OXO28352ED MEMORY COULD NOT BE READ.
View 1 Replies View RelatedGetting an error message that goes STOP: 0x0000008E. Everytime i try to shut down or restart. I was also getting alot of Buffer Overflow Blocked warnings from mcafee before i uninstalled and used SpyBot Search And Destroy which has cleaned a couple trojans off of my comp that mcafee did not find.? Also everytime i open a program or even I.E. A seperate window opens up thats all text, And if i close that window the whole program closes.
View 14 Replies View Relatedmy computer has begun taking FOREVER when I shutdown/restart it. I shut it down about 30 minutes ago to open it up and clean the dust out and I timed it. I was waiting at the blue "Windows is shutting down" screen for 5 minutes and 15 seconds!I don't know what is wrong, I haven't changed anything recently that should have cause this, not to my knowledge anyways.The only things that I can think of that I did recently was upgrade my video card to a ATI Radeon 9600XT and set my page file to be cleared on shutdown.
View 9 Replies View RelatedIs there a way I can make a shutdown and log off button on my desktop so that when I double click on them it either shuts the computer off or restarts it intstead of going to the start menu?
View 9 Replies View RelatedMy computer will not shut down. When I hit the "start" button and then select "shutdown" it goes through all of the motions, but then it reboots. It is almost as though it thinks that I am hitting the "restart" button instead of the "shutdown" button. When I followed the checklist in Windows, it suggested a restore point. I tried that but it said that I had made no changes to the computer since that restore point and therefore I could not use the restore point technique.
View 7 Replies View RelatedMy laptop freezes 9/10 when i choose shutdown and i have to force it by holding down the power button sometimes (4/10) it freezes when you leave it on its own for a while, usually when the screensaver kicked in it would ask for user to log on again..it was when bringing it out of screensaver it would do this - so i disabled the screensaver and now its not as often when it happens - its just if its been left for a while sometimes the screen will go black and freeze, it happened once or twice when logging off and other user goes to log on.. so t appears to be problem with the log on part of the setup
View 4 Replies View Relatedwhen ever i turn on/ restart/ start my laptop after hibernate , the PC just hangs if and only if the internet connection is on. So i have to power down my laptop, switch off internet, restart for normal working.I am able to login into my account, i see the desktop, and then the system freezes.There are no icons in the system tray except time. when i move my cursor over the system tray or taskbar, i get a busy hourglass symbol
View 4 Replies View RelatedRecently my PC stopped restarting properly.If I choose restart it takes longer than usual, then windows shuts down, leaving the hard drive light on, then nothing. It just hangs there. I end up forcing shut down.It simply never tries to startup again. If I choose "shut down" everything goes OK, PC shuts off normally.I've heard that a friend had the same problem with an older PC (Mines 6yrs old) and he said he replaced the battery and the problem stopped.
View 14 Replies View RelatedI have recently built and deployed an SBS 2003 server. Today I joined one of my machines to that newly created domain. In this process (adding to domain, redirecting My Docs, etc.) I lost the ability to logoff. Not exactly clear when that happened, but the current state is no good.I cannot log off using the start menu items. When the logoff or shutdown dialogs come up I can click the OK or Log Off and the dialog goes away, but nothing happens. I have looked at the task manager and really nothing happens. CPU doesn't budge. I can continue working as long as I'd like.
View 9 Replies View RelatedI have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode.
I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having.My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts: c: 30GB FAT32 primary d: 30GB FAT32 " e: 30gb FAT32 "
PC has rebooted perfectly until yesterday. When I go thru the restart computer process. it will stall at the startup p.o.s.t screen. I can shut it down with the shutdown computer process and it powers off. I wait a few seconds, then power back on and it will boot into Windows perfectly.It just will not go thru the restart process. Power off and power on, it will bootup normally.
View 3 Replies View Relatedxp pro sp2 automatic updates enabled. My computer restarts automatically after shut down. This happens sometimes immediately, sometimes after a delay of up to 10 minutes. I tried using third party shut down programs, but that did not help. However if I let the computer go into hibernate, it shuts down and does not restart. I do not have Roxio installed, and in the settings for startup and recovery the automatic restart is disabled.
View 8 Replies View Relatedi remote into my XP box everything is fine except when i shut down using a shutdown shortcut and other shutdown utilities no matter what after i get booted off the remote session the computer looks like its shutting down then stays on for a few seconds then a BSOD appear. I have been trying to figure out why for the past week and no solution so im hoping someone can chime in..The problem is only on remote if i shut down locally never a single BSOD and no hardware has changed. No driver issues. ive read and tried all the usual solutions. Need someone here to chime in on specifics.Ive also tried to remote in with bare minimum and no go. same thing.
View 1 Replies View RelatedAll of a sudden, in the last couple of days, I find that I have to go through my Start>Turn off Computer > Restart twice in order for the computer to restart. Unfortunately, I've made a LOT of changes in the past few days (new programs, a system restore, windows registry cleanup, startup configuration changes, etc.) so I have no idea what caused this.
View 11 Replies View RelatedThis is weird. I have to go through the shutdown procedure twice, i.e., Start/Shut Down/Shut Down and click Ok, then Start/Shut Down/Shut Down and click Ok again. It will then shutdown properly. The same thing happens when I try to "Restart." After doing the first shutdown sequence, everything is normal. I can open programs, surf the web, etc. It's as if I never tried to shut it down at all. Only after the second shutdown procedure will it shutdown fully. One note: When I go through the first shutdown sequence, my taskbar pops up and the desktop is darkened. After clicking Ok, the taskbar autohides and my desktop returns to its normal color.I have only had this problem for the last month or two. Before that, all was fine. It's not critical since I can shut it down. It's just annoying to have to do it twice.I have Windows 2000 Pro, SP4, build 5.00.2195.
View 3 Replies View Related