Rosewill RC200 IDE Adapter
Apr 22, 2007
Please redirect, if necessary to get my XP to installon a Rosewill RC200 IDE adapter.I'm not using RAID but the Rosewill RAID card which gets me past some bad IDE channels on the mainboard.The install is being done on old gear because I have not used XP before and am doing trial benchwork.The big problem seems to be XP finding the correct file and reading it from the Rosewill floppy disk.The file is called pnp680r.sys and the error message repeatedly says "cannot copy file etc."Previous installs using Win2000 Pro have read the necessary setup file easily.What I'm wondering is if there is some setup on the card and its BIOS/RAID set info for one drive ( a Western Digital 30G on NTFS) that I haven't completed properly and so XP cannot find the info read in by the floppy.
View 1 Replies
ADVERTISEMENT
Sep 27, 2009
Have a dell xps m140, running win xp pro service pack 3. Based on your knowledge of windows xp system files and there function, i was wondering if you would know appropriate files that will need to copy. The scenario is a s follows
Got infect by a virus, virus was removed by Kaspersky. After virus removal both the 10/100 NIC and the wireless adapter, and the bluetooth have indicated that they are disconnected. However from device manager they show up as working properly, which they are not as I cannot connect to the internet and there is a red X on all three icons in the system tray. I am wondering if a system file related to network connectivity was afftected and subsequently deleted by kaspersky
View 10 Replies
View Related
Aug 24, 2006
Sort of XP and also ME. I have two usb wireless adapters and an ADSL router. Both of the computers have access to the router but i am trying to network them together without the router. One is a laptop with windows xp and a BT Voyager 1055 adapter: http://www.shop.bt.com/invt/cbw177The other is a desctop with windows ME and a belkin wireless adapter: http://www.argos.co.uk/static/Product/partNumber/6766647.htm, I have created a network using the belkin supplied software called 'lan' using no encryption for the time being for ease of use. I have the picked up this network on the laptop and connected. I have assigned them both ip addresses that are alike except the last digit and have then gone 'run > command > ping (ip)' from each. They both get a response but i cannot access the documents folders.
View 6 Replies
View Related
Feb 28, 2007
IDE to USB Adapter - need driver, I purchased a Vantec CB-IUSB20 so I could hookup a slave drive temporarily.However, I am unable to "see" the drive and the mini disk that they gave me only shows "card reader" drivers.I'm running it on a WinXP machine.I used it originally a month or so ago on another machine but no luck on this one, I've tried a Maxtor 30GB and a Seagate 200 GB.
View 8 Replies
View Related
Aug 16, 2005
Xp pro. does nor let me use this devise. I get a yellow disk with a explanation mark in the centre, in "hardware"
View 6 Replies
View Related
Jan 8, 2009
Well, over the pas few weeks i have tried installing backtrack and ubuntu which are both linux distros and did not have any luck connecting to the internet wireless or through a cable.I reformatted the computer and reinstalled windows and still nothing.I have went to device manager and tried uninstalling and rebooting, hoping that it would fix it. Didnt work. Also i have multiple other devices with yellow question marks as there icon.
View 2 Replies
View Related
Sep 19, 2005
I've got an USB Adapter on my XP machine.I do need to keep alive my USB adapter, even if the network is NOT available.(the adapter seems to be in sleeping mode, if no network is connected...) Is there anybody, who can tell me how to disable this feature?
View 1 Replies
View Related
Jul 6, 2005
I have a notebook with xp pro and i have a foreign language keyboard that I would like to plug in and use. The keyboard is ps2 but I dont have a ps2 connection on my notebook. i went to an electonics store and bought a ps2 to usb adapter so that I could use this keyboard - but xp pro doesnt recognise it doesnt ask for new drivers - doesnt even register.
View 4 Replies
View Related
Oct 12, 2007
i have 2 PCs in my home: PC1 and PC2 i run Windows XP SP2 on both PC1 is directly connected to the internet and is working fine
PC2 uses a TEW-424UB wireless USB network adapter. It was ok, but it stopped working. I tried unplugging-replugging, but Windows doesn't even detect the device any more when i plug it in NOTHING happens. And when i check for the device in Device Manager, there's a yellow icon and it tells me the device can't start.
View 7 Replies
View Related
Sep 4, 2005
I'm trying to connect from my desktop to my laptop using RDC. They are both on my home network. When I RDC into my laptop, I get the login screen as I expected, login, and I'm in.for about two seconds. After that, the connection hangs and eventually RDC drops me
When I log into the laptop itself, the wireless connection icon in the bottom right shows "acquireing network address" for a second, finds it, and then the laptop is on the network again. I'm assuming that when I do RDC into the laptop and the desktop takes over, the network adapter on the laptop thinks it's time to sleep or disable, and drops off the lan. I confirmed this by doing a ping fromthe desktop to the laptop. Before RDC, no problem. After the RDC connection hands, I can't ping the laptop anymore. Once I log into the laptop itself, I can ping the laptop from the desktop
View 1 Replies
View Related
Sep 23, 2010
where to find MN-520 Wireless Adapter Driver?
View 1 Replies
View Related
Sep 13, 2005
I installed a wireless adapter, it worked for4 days , then XP gives an error that 'xpdoes not recognize the item connected to the usb and that it has malfunctioned. I replaced the wirless adapter 3 times and even went to another vendor and it still says that. It claims that there is no driver, but when I install the software it says the driver is there. IF I delete the unknown device, it puts a driver in but the unit will not even light up.
I ran a registry cleanup fromlinksys and it was suppose to get rid of all the drivers but it still does not work. I changedto Netgear and it does the same thing.
View 5 Replies
View Related
Jul 28, 2005
I recently purchased Madden 2005 for the pc, I have always used a PS2 controller with a adapter to use it on my pc, but now I am having problems configing it with my ps2 controller. My adapter came w/ just a driver no software. Is there any universal software that I could use that could possibly make it so I could revamp what keys are assigned to which button. If you buy a logitech controller, it comes w/ software to change which button is considered button "1" and "2" etc...Im looking for something like that, that you could use with this adapter, like I said something universal.
View 1 Replies
View Related
Apr 14, 2007
My battrey is shot can i still use the laptop with a/c adapter.
View 1 Replies
View Related
Jul 25, 2005
I have bought an infrared adapter to connect to my mobile phone (MA620 USB), but unfortunately I could not install it to my computer....I know it should be Straight forward and I have followed the instructions step by step ...but all I kept getting is a massage saying that the driver for the device could not be found (even on the disk that came with the device). Iam using XP home edition sp2, and the driver on the disk is for use with xp. I have even downloaded the latest driver from the company home page .....but still got the same result.
View 2 Replies
View Related
Mar 21, 2006
I'm writing this from my work computer, because I've totally messed up my Dell Dimension 8250 running XP Pro).I combined my dual OS computer into only one large partition and Fdisked(wiped out my OS(s) on my primary hard drive, in an attempt to reinstall on XP OS for my computer.To make a long story as short as I can, I removed(Fdisk) and "clean installed" my XP Pro OS from Dell's XP installation disk on my unpartitioned primary hard drive, But I can NOT connect to my ISP or the internet because I lost the driver CD and can't connect to the internet to download and install then.
View 9 Replies
View Related
Sep 2, 2010
I want drive for net adapter device.
View 2 Replies
View Related
Aug 5, 2005
Recently, I installed the latest NVIDIA display drivers. However, I didn't uninstall my previous drivers, and when i remembered that i have to, i did...but after i had installed the latest drivers. And that's when the problem seemed to start. I looked on the Add/Remove programs list to see if the latest drivers were there, but there was nothing there. I couldn't find them on the list anywhere. So I tried reinstalling them, and when they were being installed, i got a message saying: "Windows could not load the installer for display. Contact your hardware vendor for assitsance."
View 11 Replies
View Related
Dec 29, 2007
My girlfriend has an Emachines P3104 - AMD Sempron 3100+ 1.80GHz 1gig ram, xp pro sp2. At some point recently her teenage boys took it upon themselves to install a 2nd hard drive that they found in another Emachines that no longer worked. Shortly thereafter the standby button became greyed out and that function no longer worked. Then we could not get the computer to recognize or install the printer. Due to these and other various problems that accumulated over time.
View 1 Replies
View Related
Jun 24, 2005
After reinstalling XP due to some corrupted files, the software works OK now, but it does not recognize my display adapter, NVIDIA GeForce 4 MX440-8X. In the Device Manager there is no display adapter listed, and I am having trouble operating my scrolling and dragging features. NVIDIA is made by ChainTech.
View 5 Replies
View Related
Mar 19, 2006
I have recently gone back and redone a lot of windows. uninstalling updates and reinstalling them. I now do not have a display adapter showing up in the hardware manager. I cannot play games, and all rendereing is very slow. i have tried installing software from nvidia and the video card manufacturer. I have tried the add new hardware wizard, but nothing has worked. I have no idea what to do. I also took a graphics card from another computer and put it in mine and it did not show up either.
View 8 Replies
View Related
Mar 1, 2009
I'm trying to help my roommate get her laptop to access the Internet, but I can't figure it out.. Here are the hardware/software specs: Right now, the laptop either doesn't connect at all, or only very briefly. We've used both the Linksys networking software and the Windows one.However, it works fine when we don't have security setup, so I'm thinking it has something to do with this. We're using WPA-PSK with TKIP encryption. We don't want to have to leave our computers unsecured.
View 2 Replies
View Related
Aug 30, 2007
HP laptop will not shut down with the DWA-643 wireless adapter card inserted in the expresscard slot. Operating system is XP SP2 Media. Laptop will just reboot itself. Of course, if I hold the power button down the system will shut down or take the card out. I have tried the Microsoft methods to shutting a system down if the system will not shut down. I've tried two different cards and get the same result. Any ideas or patch to resolve? Also, I have updated to the current driver on the Dlink download site. Using Windows zero configuration. Upgraded to latest BIOS available.
View 1 Replies
View Related
Feb 18, 2005
Following overactive uninstallation of an ip filtering utility, my network adapter has stopped functioning. (Broadcom 440x 10/100 integrated controller, XP pro sp1)
I strongly suspect serious registry damage, but none of the three highly rated registry utilities I have used have been able to fix the problem. In Device Manager -> properties, the message is : 'device not configured properly (code 1), reinstall the driver.' Attempting to reinstall the driver gives the following error message: 'An error occurred during installation of the device The system cannot find the file specified'.
View 1 Replies
View Related
Aug 22, 2009
I need to know how to change the name of a Network Adapter, specifically the Hamachi one. When going to Network Connections, under the Hamachi connection it states its Network Adapter name (also shown as this in Device Manager); Hamachi Network InterfaceI need to change Hamachi Network Interface to anything else, other than Hamachi Network Interface, Lets rename it to Local VPN.I have altared all instances of the name Hamachi Network Interface located in the registry (literally searched for it, and replaced all values and names that stated it with Local VPN instead of Hamachi Network Interface), I even changed all instances within the driver itself, reinstalled the driver, and it still would not altar the name to Local VPN.
View 3 Replies
View Related
Sep 12, 2009
I have recently acquired a Dell Studio 1555 laptop with the above configuration. My OS(and drivers) were partialy instaled by the seller. Now here is the problem. After I installed the network lan and wireless adapter(using the dell official drivers), I noticed that IE doesn't work. As I'm a Firefox person myself I just let it pass, but then I noticed that other things like the Java Runtime online installer, Yahoo messanger online installer, Blizzard downloader, Yahoo messanger itself(I got the full kit downloaded and installed it), don't work. The message is the similar on all of them: check if your firewall or your internet settings do not forbid access to X. Clearly, the firewall is off and the security settings are checked and shouldn't be a problem. So I got back to the internet explorer, thinking that all these are somehow related. I "used diagnostic tool" then "view log".
View 2 Replies
View Related
Mar 19, 2010
yellow ! on wan miniport ATW #2, can not start (code 10) tried uninstall & reinstall didn't work.
View 1 Replies
View Related
Apr 14, 2008
Had to reformat a drive and reinstall XP Pro on it, but upon reinstallation of XP it refuses to recognize the network adapter. It's been determined that the network adapter is a 3C920B-EMB Integrated Fast Ethernet Controller.Upon downloading drivers for this and attempts to install them, an error of "The device cannot start" occurs.On a separate install of XP on a seperate drive, the network adapter functions greatly. Is there a way to take the registry keys from the one install of XP and somehow...copy them over to the other install of XP? Or, is there a way to get the thing functioning without having to do that?
View 8 Replies
View Related
Mar 4, 2008
I was able to successfully install XP Pro SP2 (32-bit, I believe) and achieve dual-booting with Vista Home Premium (32-bit, I believe).
My problem is my XP OS doesn't connect to the Internet. I tried disconnecting my Linksys network adapter (WMP54G), installing using provided CD in XP, reconnecting the adapter, and booting XP up.It doesn't recognize the adapter still
View 1 Replies
View Related
Oct 10, 2008
I am running Windows 2000 Professional SP4 and using a wireless USB card to connect to my home network. The USB card is a Dick Smith Electronics (New Zealand) branded one which uses a Ralink RT73 chip
whenever I transfer files from this computer to another the copying starts, but doesn't get very far. The computer crashes shortly after starting with Stop: 0x0000001E "KMODE_EXCEPTION_NOT_HANDLED". The file quoted causing problem is rt73.sys" which is the driver for the USB card. I have searched the internet and read microsoft tech support page about this error and I think the driver is sending requests which the processor cannot understand I have tried updating the driver, but this has not worked. I have tried the card on a Windows XP computer with the same driver, and it transfers files fine
View 5 Replies
View Related
May 3, 2007
I am trying to copy a file (4gig) from another computer. When I copy with a wired adapter it takes about 10 minutes. When I copy with the wireless adapter it takes about 50 minutes. I am using Windows XP Pro.
View 5 Replies
View Related
