Repair Didn't Fix Damaged .dll - Cannot Boot
Sep 17, 2006
I have a DELL with an OEM installation CD. I un-installed a crappy program which just corrupted the file ootmapi.dll. Now, when I try to boot, I get the message that "ootmapi.dll was not found, reinstalling the application may fix the problem". I have tried safe mode, last known good config, and even a live Windows CD I made through Bart PE (an amazing program). I have alot of information I NEED on my hard drive. I was about to back up my data-it seems as if computers decide to stop working at the worst possible time . Please post all possible solutions and a step by step guide to reinstalling windows through my Windows CD.
View 1 Replies
ADVERTISEMENT
Oct 27, 2009
I was having problems with my computer and a BSOD that pointed to my hd. I decided to reinstall XP but then decided to try a repair first. The repair seems to work to an extent as pc starts fine now and seems to load normally etc. However upon starting I noticed the desktop had reverted back to default, my programs weren't listed in the start menu and favorites were gone. I was guessing that it wiped my hd like I had done a re-install. So I went to copy some of my backed up files but when I went into My Computer I see that all my files are still there under C:Documents&SettingsOwner like before. But also under Documents & Settings are these folders now.
View 3 Replies
View Related
Jun 26, 2005
I'm having all sorts of problems with my computer (Windows Explorer shutting down, DVD drive not reading blank or used DVD+Rs correctly, etc). Tried to repair using SFC /Scannow but since it says that there are files that are missing or replaced by other files it asks for the SP2 CD- which I don't have since it was an automatic download.
1. Any way to remove SP2? It's not listed in the add/remove programs?
2. If I put in the SP1a CD, will it repair Windows to the SP1A setting WITHOUT causing me to lose all my data?
3. Are there problems with the updates from last week because all the problems started after the seven automatic downloads.
4. Can I download the SP2 somewhere online and run it to correct the problems?
View 8 Replies
View Related
Jan 16, 2007
I just started my Dell the other day and as the subject says, it didn't boot and went to a blue screen which said something along the lines of.it gave me options to start in Safe mode and a few others or to start at the last point where everything was ok. I choose this option and windows started without a hitch and I didn;t notice anything out of place or missing. I've done a few restarts since then and nothing out of the ordinary has happened since.BUT, then today I was loading some more programs on my recently formatted laptop. One of them being Perfect Disk 8 (trial) and WinPatrol alerted me to the startup entries. One of them being PDEngine, the other PDAgent. I'm assuming Perfect Disk caused this error on the Dell. Anyone have any Idea as to what may have happened. now I'm afraid to use the program on either comp.
View 3 Replies
View Related
Jan 1, 2008
About ten days ago my Acer Aspire E360 (AMD 64 X2 3800, 2gb - Win Media Center 2005) started giving BSOD errors at startup. It would to into safe mode but no trouble shooting worked. Finally it wouldn't boot at all giving me the: NTLDR missing error. I downloaded the ISO that 'fixes' this error and it didn't work, saying that hal.dll was missing. My recovery disks - 6 in all - are available but when I booted from them they said that it would erase the entire C drive. In the meantime I downloaded ISOs to test the disk and the memory. Disk was fine, but there was one very bad memory stick, which I've replaced.
I don't want to lose the C: data. I did do an Acronis 10 backup just before it went totally down, but I'm not sure that the bad memory stick didn't corrupt data that's now backed up. A friend gave me a copy of a WinXP Pro (without serial number) to see if I could use the repair function. However, he only copied the files and did not clone the disk so it's not bootable. Using another computer I used Nero (Caldera DOS) to make a bootable disk. Unfortunately when I tried to boot up with it I got a warning: "EMM386 - address line A20 already enabled." and then it froze.
View 3 Replies
View Related
Oct 2, 2007
i created 2 partitions, in one i installed winxp 64, in the other i installed wxp 32, but after installing the 32 bits version and tried to boot into xp64 i got that message, ntoskrnl.exe missing or damaged whats the problem??? i can boot into the 32 bits version, but the 64 bits is damaged or something.
View 2 Replies
View Related
Dec 27, 2007
I have a dell PC with windows XP Media Center installed. I think that a virus damaged the boot sector in fact I cannot start my PC.
All I am able to get to is the BIOS or the diagnostics tool, F8 doesn't work, which means I cannot restart in safe mode or last known good configuration and if I use alt+F11, which is the option you have on Dell PC to reformat it in order to have everything the way it was at the time you bought it, it doesn't work.
A friend of mine told me to boot from the CD and then use the fixboot command, the problem is that DELL does not give OS CDs anymore and I honestly do not know what to do
View 6 Replies
View Related
Jul 27, 2005
I have a damaged Windows XP CD and do not think its fair I pay just to request the info in getting it replaced. I saw this option and wanted to see if I could get something done about it.
I have a damaged OEM CD and the expired CDKEY that came with it from maximum activations as I was having BSOD problems which then was discovered to be bad RAM. The company I bought it from is now bankrupt and non-existant. Now I am left with a CD that makes a great coaster and a CDKEY that has expired from activation. When I first installed it 1 support request was already used? I had made one request and registered it with Microsoft so it has to be on archive even if it hasn't been used.Since I can't copy and paste.
View 4 Replies
View Related
Jan 1, 2008
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
View 1 Replies
View Related
Aug 11, 2009
It says windows can't be started up because windowssystem32configsystem is damaged or can't be found.I already tried bootcfg but doesn't make any differnce.
View 9 Replies
View Related
Mar 23, 2008
I've done a bit of searching on here and thought I'd found a way out of my problem but it seems not. Briefly my PC keeps looping on start up, it won't start in safe mode, last known config etc, so after reading here I've popped in a XP CD to do a repair but from instructions I didn't chose the 'r' function but pressed 'enter' to start the setup. I accepted the licence agreement and the PC found 2 partitions but I don't get the option to 'repair'. All I can do is 'end' the setup as I don't want to wipe my data
View 5 Replies
View Related
May 7, 2005
Can any one tell me how to set the "Recovery Console" as a boot option? I also don't have a CD of Windows XP pro, is it still possible?
View 6 Replies
View Related
Mar 20, 2009
PC running XP media edt. Once turned on I get The following file is missing or corrupt
windowssystem32configsystem.This happens even in safe mode. Then tried to do a repair with the system discs as soon a s I get to the recovery console ans type the Windows version to repair I get the dreaded blue screen with message Stop error 0x00000043 0XC35C6000 0X00000000 0X00000000. So I can't boot into windows nor do a repair. I@ve tested the memory.
View 7 Replies
View Related
Jan 16, 2006
My W2K program is not a boot disk version, so you need to make a series of four (4) boot flopies. I need to get to the "REPAIR" option presumably located on one of the four floppies I made- question is, where is it located and how do I get to it?
View 10 Replies
View Related
Jan 15, 2008
i dont have the option with my xp to boot and run a repair "r" i know this has to do with oem,volume license disks etc...i was wondering if there was another way i could run a repair...
View 5 Replies
View Related
May 1, 2010
I want to repair my windows cause I doesn't boot up properly..I hve followed instructions but when I put cd in it takes mr to set up windows n asking mr to select partition..so I select my current system drive n it is asking mr to press c to continue setup using this partition..N then it ask me to format or leave current file system intact..am I doing something wrong, how come I don't have the repair windows xp option like it shows on the user guide?
View 2 Replies
View Related
May 7, 2007
I have tried FIXMBR, FIXBOOT and now trying to reinstall using the guide in another thread. I do not get the same R option when I get to the SETUP screen. It looks to me like it will fresh install XP and wipe everything. Originally I was getting missing SYSTEM file and boot stops. I found what I thought was the SYSTEM file and put it into the directory but it still will not boot. I just get another new error.
View 4 Replies
View Related
Aug 19, 2007
My comp is acting weird so i decided to either repair windows or reinstall windows, but after it says press any key to boot from cd, and i press a key, i get a blank screen or it loads windows.
View 14 Replies
View Related
Sep 7, 2010
Can someone please tell me if I can use a Windows XP Professional disk to repair a Windows XP Home Edition unmountable boot volume? My sister-in-law's Dell Dimension 8400 is getting that error when she starts the PC. She can't locate the disks that came with the PC and I only have an XP Pro disk. I repaired my laptop using recovery console about a year ago but that is XP Pro also.
View 8 Replies
View Related
Aug 1, 2005
I have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
View 2 Replies
View Related
Aug 24, 2005
Problems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.
View 14 Replies
View Related
Jan 12, 2007
I'm thinking about Re-formatting my computer. i seem to get a new pc every few months,lol, so i have never actually done it before. My current pc is a stor brought one and unfortunatley i didn't not get the Windows XP cd when i purchased it. for the Windows cd and was wondering if there are any other ways to Re-format my pc, i have hered about getting an OEM version of XP, will that be ok
View 5 Replies
View Related
Feb 2, 2007
After re-installing Windows XP I am now locked out of Windows by a password which I didn't set!
View 2 Replies
View Related
Jan 14, 2008
I recently had a problem with my computer so I boot up my recovery cd. Soon everything was working fine and I installed some programs that I used to have. However, a few days ago, everything went weird again. (But in a different way before I used the recovery cd.)All the installers didn't work. They all had errors halfway through. They created empty folders in the program files and they can't be removed. Most things in the program files now can't be removed. I also can't install some other programs and the error messages were something like I didn't have access. But I was on the administrator account. I'm sure the installers weren't corrupted because one of them was the iTunes installer.. When even that couldn't be installed,
View 1 Replies
View Related
Aug 12, 2005
The Memory has been tested by PCClub and has passed the test this memory is new and fresh so nothing is wrong with the memory.What im thinking is that its the power supply because i didn't get the Power Supply my friend got the power supply at the Thirft Store (the name of it is what it is Thirft Store) now i didnt think it was messed up because it was in package and all wraped.I have some pictures but NOTE: The Pictures are when i was useing the CPU from a Compaq Presario so dont pay anything to that.
View 16 Replies
View Related
Feb 22, 2008
I've bought a new notebook.The specifications you can see from my profile.
I've got an AMD Athlon 64X, X2 1.80GHz TK-55 Processor.
I've tryed to install the Windows XP SP2 64X Edition, at the setup Windows didn't install?!
View 2 Replies
View Related
Oct 2, 2009
Folders were named "+stuff" and "++++junk" were accidentally deleted from my documents. didn't appear in the recycle bin can't be found to restore. Anyone heard of this being a known issue can the plus sign be used in folder names? I've tried to duplicate and can't. I can create new ones and delete and restore
View 5 Replies
View Related
May 19, 2007
I'm looking at a lap top for a friend. When it boots up, it starts normally and then on a black screen it says that windows did not start successfully. It gives a list of ways to boot up, safe mode safe mode with network, some others, then last known good config. None work. Which ever I try I then get a blue screen with "A problem has been detected and windows has been shut down to prevent damage. An attempt was make to write to read only memory." It then tells me if it's the first time I'm seeing the screen that I should reboot etc.
View 8 Replies
View Related
Apr 26, 2006
After turning the computer on that my taskbar and desktop didn't appear. I went to Task Manager and used the "run" command and typed "explorer.exe" and try to load it up that way. It did load up, but the thing is, it blinked on, and then was turned off. Right now I'm using the Task manager to do everything I'm doing right now. I'm pretty sure that this is a virus, but I want to be completely sure.
View 7 Replies
View Related
Feb 22, 2006
I have a problem with Windows XP. I didn't shut down the PC properly. After that when I switch it on, the windows progresses until the screen with blue button running right-left left-right for couple of seconds and then: black screen and nothing.I tried safe startup - it worked OK. I performed recovery to yesterday savepoint, but the result remains the same as above.
View 14 Replies
View Related
May 19, 2008
Last year i bought a IBM laptop and they didnt provide any Window XP cd or any other CD and now my pc was infected by viruses which can't detected by any antivirus software. what i can see is that....my C drive is in Blue word and other folder in C drive are also in blue.
1) since i only have the genuine lisence key (attached behind my laptop), how should i format my laptop since IBM didnt provide any Windows Xp Cd
2) Why my C drive and some few folders in the C drive are name in "Blue"?
View 11 Replies
View Related
