Whenever I'm in SafeMode and want to log into my password protected Default Administrator account I receive this notification:
USER ENVIRONMENT
Windows cannot load the users profile but has logged you on with the default profile for the system.
DETAILS: Incorrect Function.
I installed new DVDCD-RW and can read but not write.
View 7 Replies View RelatedI have been trying to install Win XP Home Edition Service Pack 2 on my old puter. It's really slow and old like 10 years old. I am planning on fixing it up. I tried to install XP, and after it copied the files (which took forever) it went on to the install step. Every time, it gets stuck on a "fatal" error that says "Incorrect Function." Then I can look at some kind of log with a bunch of files and words I never heard of.
After I click ok, it restarts and does the same thing over and over, until I turn it off. I tried to take out the CD, and it starts loading, then says I am missing files. It seems like there is nothing I can do. I contacted Microsoft, and they won't help me unless I give them 35 dollars. I'm a 15 year old kid and I don't really have much money.
I am running xp pro. I have been having problems installing a scanner but that is for another time. Currnetly I have an error message that reads D:is not accessible. Incorrect funtion. This has rendered that dive useless so I cannot load or play any discs. How do I get this drive working again?
View 1 Replies View RelatedI cannot use Add/Remove Programs. I just get this message: "Setup was unable to open information file wmpocm.inf. Contact your system administrator. The specific error code is 0x2 at line 0." How do I fix this? I have Windows XP Media Center Edition, Ver. 2002, Service Pack 3.
View 8 Replies View RelatedI use Windows XP Media Edition and yesterday the Add/Remove Programs function on my control panel quit working. The message comes up please wait while the list is being populated and then nothing else happens. The longest I waited was 45 minutes while I went off and did something else. The list never appeared. All of the other functions in the control panel seem to be working.Everything seems to have slowed down on my computer. It is a Pentium(R) CPU 3.60 GHz 2 GB of RAM Service Pack 2 Version 2002 I bought it at Frys Electronics. Does anyone have any suggestions for the Add/Remove Programs glitch? Am I about to lose a hard drive?
View 2 Replies View RelatedMy video card is: ATI Radeon HD 4350
It has one Digital and one Analog port on the back.
I had it setup using 1920 x 1080 on both ports (dual monitor).
But I can't get that to work again.
When I set the monitor using the VGA port to 1920x1080 then it displays 1280x720 on the monitor, but the video card is outputting 1920x1080. The display seems to scroll when the mouse is on the edge of the screen because obviously it can't display 1920x1080 on a 1280x720 resolution.
So as of now, my monitor is displaying everything really big and it's useless at this point.
I was installing my scanner onto XP and when I plugged in the usb it didn't like that port .. .. so it created an "E" drive to my computer. I was told there was an error occured and when I switched usb ports all worked fine, but,
how do I get rid of the "incorrect E drive" that was created?
I too have a problem with my memory being reported incorrectly. I have a lenovo ideapad laptop. I upgraded my laptop memory to 4GB (2GB x 2 Modules). However in Windows XP MediaCentre Service Pack 3 the memory gets reported as 2.99GB. I had the same problem with Windows Vista Home Basic Service pack 1. However the issue was resolved when I installed Service pack 2 in Vista.I tried changing the MaxMem...but the value is not getting changed. Pls help...I have downgraded my OS to WinXP and would like to continue using the same.
View 2 Replies View RelatedIn the last week I have three times tried to log on to my Windows XP Home system and been told after multiple tries that my password was incorrect (no, Caps lock wasn't on). Each time I was forced to log on to my wife's account and reset my password through the control panel. I was then able to log on but by the next day, I was seeing the same problem. I have now had to reset my password three times. This problem has never occurred before in 4 years with the system. My wife has reported the same problem, but claims that rebooting fixed it. I rebooted and was still unable to log on. I strongly suspect a virus, but I have VirusScan Professional on my work license and it updates the .dat files every day. I checked the logs and nothing found. I know about creating and using a password reset disk, but that doesn't fix the problem I'm having.
One option is that somebody else is messing with my password, but my son is off at college and my wife would not know how to do it. I asked my daughter about it and she says she didn't do it, and she is very trustworthy It has happened again since last night without her being on the computer, anyway. I am a very experienced computer user (20+ years) and type in dozens of passwords a day, so I know it's not a problem with my typing.
With a DVD-R disk in the DVD Rom, System idntifies it as a CD.
View 8 Replies View RelatedWhenever I run a program like NOD32, iTunes, or even the Windows Update utility, an error message comes up saying that the system time is incorrect, even though it is clearly not. I reformatted, reinstalled Windows, and went through the steps in the Microsoft knowledge base to no avail.
View 7 Replies View RelatedWhen I open an Access 2003 DB in a multi-user mode I get the following error: "The parameter is incorrect". BUT if I right click on the file name and select Open With - Microsoft Office Access then it opens up just fine. I have tried to re-associate the program with the file type but that did not fix it. It opens fine if no one else is in the database.AND once I'm in the database and I try to click the Save button it tells me. I don't have exclusive rights and it wont' save my changes but it does save changes.
View 1 Replies View Relatedi have a 2 year old pc that i bought with windows xp media center edition 2005 pre-installed and activated. only a week ago, it started asking me to activate windows before i could log in every time i restarted my computer. i would click ok and then it would ask me to activate. i would activate over internet and when it did, it say i have an incorrect product key. i don't know why this happens because the computer was pre-activated and i didn't do anything to my computer when it started happening except played some games. something even more wierd is that 1 in 5 times it boots up perfectly normal without asking me to activate. it is really annoying to have to try restarting my pc until it randomly lets me log in.
View 2 Replies View RelatedI have an HP Pavilion 8275 computer. It currently runs on window millennium.
My problem is that while I was installing windows XP Pro on it I got an error on it that says as follows.ERROR:
INSTALLATION FAILED:1386ASM.Error message: The parameter is incorrect.Fatal error: One of the componants that windows needs to continue set up could not be installed.
The Parameter is incorrect.I have left the computer on and with this message on it. So if I have to make any corrections on it. I won't have to start from scratch.
Using Partition Expert on a master HDD with two partitions I resized the second partiton down by about 8 GB, then resized the C partition from 10 to 18.25 GB. Committed Operation. Seemed to be doing fine, next time I looked at the screen it was blue and it said the system had encountered a problem and Windows was shut down to prevent damage. The PC rebooted fine and everything works OK. However, Explorer says the size of the two partitons is 10 GB and 20 GB, somewhere I lost 8.25 GB (which is the least of my worries anyway)Defrag says the same thing, however, Partition Expert says the partitions are 18.25 GB and 20GB. And this is what Windows Disk Manager says: In the top panel it says the partitons are 10 GB and 20 GB.
View 5 Replies View RelatedI ran latest version of Spybot on my laptop (Windows 2000) There were several malware that Spybot wanted to remove. Ran a backup. However at one point on the process Spybot asked if I want a series of actions allowed. I clicked on allow and an endless stream of these questions began to show up. I did not click on remember these actions while allowing Spybot to delete. Got tired of doing that repetitive action and rebooted. Machine starts up, shows desktop and then desktop goes away replaced by the following applet with just a light blue screen behind it
C:WINNTsystem32command.com
The parameter is incorrect
Hit Ok but applet comes back. Hit close but applet comes back. Can only force a shutdown. Went into safemode tried "run last good configuration" ...same result. Went back into safe mode and ran the backup on Spybot to reverse actions but of course since I didn't hit remember the allowed actions the malwares were returned but the problem not fixed.
I am trying to allow users to change their own passwords on a win2k server using net user.I tried: net user username password computername.The error says the filename, directory, or volume label syntax is incorrect.The server is on a different vlan than where the command is run but I have added the computer name to the hosts file so it is able to resolve it when I ping it so I don't think that is the problem.
View 7 Replies View RelatedAfter accessing the Yahoo Browser and reading any emails, if I go to a site, then select the "Read Mail" icon in the task bar, an invalid Outlook Express email form opens.My email provider is Yahoo Mail and Internet Options verifies this.What must I do to prevent the "OE" from opening in lieu of Yahoo Mail?
View 2 Replies View RelatedAlthough this has previously appeared in forum, thread is now closed.I have ntfs file system. On Used space and Free space I get unreal amounts (.98tb Free space). I am running XP Pro, Sp2. Problems started overnight.My other HDs show correct amounts.
View 1 Replies View RelatedWell its January 2008 and today when i turned on my computer i saw that my date and time were wrong..plus when i was starting up my computer a message said something like i need to set date and time. I tried to double click the clock at the bottom right side of the computer screen but it does not respond. The time and date window will not pop up so i can reset it. I tried the control panel clicked on dates, times, language, and regional options then i clicked change the date and time but when i click that option nothing appeared.I even click the change the format ... but i can't change the time. So that's my question.I am using AVG free edition but it is in error state and it will not allowed me to update because my computer date is not correct.
View 2 Replies View Relatedwhen i start my pc i m getting an error message saying a parameter is incorrect.
View 9 Replies View Relatedmy Mom's computer is a HP Pavilion, she's using Windows XP (the original version and she hasn't updated from Microsoft since. when exactly did dinosaurs roam the earth? ) About two weeks ago, every time that she reboots it locks up the computer and you can hear the motor running constantly. When you go to shut it down a window comes up and asks for you to wait or end task, and the error is "Device10 Notification". The ONLY thing that she has put in recently is the HP 4 in 1 Copy/Scan/Print, but that was, at least, two weeks before the problem started. There is YET another error message that appears every once in a while, it's for HP Imaging Device, and you have to end task to get it to shut down, but this isn't a constant problem like the device10 is.
View 1 Replies View RelatedLike alot of people that build their own systems or constantly upgrade and switch out parts, I use a cracked copy of Windows XP on some of my builds. These are my own builds and if someone wants a new PC, the price of a genuine Windows OS is included in the price and they are given the disk. It is because of Microsofts asinine activation feature and the fact that I have 4 desktops and 2 laptops that I use the cracked copy. Anyways, my girlfriends dad's (a cop )laptop recently had a hard drive failure, and because he bought it with Windows preinstalled(no disk) he needed an OS. He didn't know any better and when I went over there last night to check on his laptop, up pops the MS genuine notification that has recently gone around.
View 2 Replies View Relatedgetting dll notification has not been registered message when i start my laptop
View 1 Replies View RelatedHow can I get more mail without getting a notification that I'm over quota when I only have maybe 5 e-mails?
View 7 Replies View RelatedThe registry key LargeSystemCache "1" on a RAID Windows XP Pro configuration will lead to disastrious read/write errors. The only way to fix is to open registry and changing the key quickly right after booting Windows and then do an official restart/shutdown.The key is located here: HKEY_LOCAL_MACHINESYSTEM CurrentControlSetControlSession ManagerMemory ManagementLargeSystemCache This tweak is widly spread to be enabled but there is never a warning for anyone on RAID! If on RAID do NOT enable this key!
View 9 Replies View Relatedi am trying to install shazara on my computer but when i click install i get error message which says error 87: the parameter is incorrect
View 2 Replies View RelatedI've acquired an older Dell computer with the FAT 32 file system. I want to convert it to NTFS. I've found many articles with directions on how to do this but I'm having a real problem. After I go to Command Prompt and enter "convert c: /fs:ntfs, and hit enter, it tells me to enter the "volume label for the drive".I've tried many different combo's but always get the notice that I have "entered an incorrect volume label".
View 2 Replies View RelatedI'm able to use EZCD 6 Platinum with no problems with DVD-R/W or CDR-W disks, but this is the first time I've tried writing any data files to DVD+R DL single sided double capacity disks. I have updated the Platinum DVD file to recognize the Plextor 740A drive (which is double layered able and also had the firmware updated on it). XP (using its own burning program can't tell that I have a disk in the drive. EZCD Creator can see the drive (but sees the disk as only a 4.7GB capacity so I've tried going over that amount to 'disk 2' to load up the files. As soon as the files are ready to burn, and it loads up the title line with everything, I immediately get the following error:
E80070057: The parameter is incorrect
With no explanation when clicking on Help. I've done a google search and I find many of these type posts in various forums but they all seem to be pretty old posts with no results or resolutions.
Iv'e installed XP pro on my new computer.after installing all the software i need on the computer i checked how much disk space i'm using before creating an image, and then i encountered a strange thing.When i measure th used disk space using ALT+ENTER from the root directory all the file amounts to about 9GB (all visible and all accounted), but when i check the disk properties it reports over 20GB used.When i created the image, the file weighed over 20GB also even thought i don't have 20GB of files.I know for sure that this is very unlikely that i'm actually using 20GB and that ALT+ENTER reports a wrong size because on my other computer.
View 7 Replies View Related