Using Partition Expert on a master HDD with two partitions I resized the second partiton down by about 8 GB, then resized the C partition from 10 to 18.25 GB. Committed Operation. Seemed to be doing fine, next time I looked at the screen it was blue and it said the system had encountered a problem and Windows was shut down to prevent damage. The PC rebooted fine and everything works OK. However, Explorer says the size of the two partitons is 10 GB and 20 GB, somewhere I lost 8.25 GB (which is the least of my worries anyway)Defrag says the same thing, however, Partition Expert says the partitions are 18.25 GB and 20GB. And this is what Windows Disk Manager says: In the top panel it says the partitons are 10 GB and 20 GB.
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
Is there a maximim partition size for Windows XP PRO. I have a 232 gig hard drive (new) and am installing Windows XP PRO. Do I need to create smaller partitions?
I have an 300GB Maxtor drive with a 234GB partition (drive C and an unallocated unformatted partition covering the rest (after I accidentally deleted it).Windows XPSP3 shows the partition in explorer as drive E: but with no size and I can't access it.When I right click the partition and choose Format it shows as 257GB big so I backed out.Acronis shows the drive the correct size but won't let me format it.
I'm planning on doing a new install of WinXP and wouldlike to keep the operating system on its own partition.How much room should I allow. I understand that XP is ever-expanding and I worry about running out of room eventually.
I've just built my first PC using a WD 3200JD SATA hard drive. When I try to install XP Pro the biggest partition size is 131069MB. Is this the limit for XP? If so, will I be able to create a new partition after I install XP on the 131069MB partition. By BIOS recognizes the drive as 320GB. I don't want to loose the remaining space on the drive.
I just got my Service Pack 2 and tried to install it, but don't have enough free space on my C partition (FAT32 File System type). I have 15.97GB allocated to this partition, but only 698MB is free. Somehow, I have a D: partition that has 39.89GB of which ALL of it is free! So, is there a way, withoutlosing my data and operating system, that I can increase the size of the C: partition and decrease the size of D: partition?
I just finished my new build. My main HDD is 250GB. I decided to partition 10 GB for windows XP SP2. The remaining I split into 2 extended partitions. Is 10 GB enough for windows xp. I would like only to have windows XP and nothing else on partition C:/ Redirection of special folders will be a valuable tool. One of my other partitions will be for programs, the third will be for documents and such. Will this help to keep my windows XP install healty, and what do I need to be aware of as far as registry entries.
I read the manual of Partition Magic v.6, it says that if the partition that contains system files is greater than 7.8 gig then it may not boot. Is it true or there is something I don't understand here? Since I like to run many applications I like to enlarge to about 10 gig but it scare me.
I did a re-install today and somehow screwed up on the partitions. The partition I was going to install XP on was supposed to be 10g, but for some reason it turned out to be 1.4g.Can I change this and add more space, without messing up the OS? Is there a free program out there that'll do this?
I am trying to increase the size of C drive (partition) while decreasing the D portion where I store music and photos. not sure where to make this adjustment?
utility supplied by Winbook to create a suspend partition on the hard drive. The utility apparently measures the memory capacity of the machine and creates a partition large enough to store the main and video memory and maybe a few other things. Now that I?ve got windows (2000) and office and all the updates installed, I want to increase physical memory but that?ll result in the suspend partition being too small.Is there a way to increase the size of the suspend partition without starting all over again?I know there is partition manager software out there but I?ve never used any.
I'm not sure this belongs in this section so if its out of place, plz move it.Ok, I just bought a HITACHI HDT725032VLA360 320GB HDD. My OS is currently installed on my 80GB WD800JB. I was thinking of reinstalling windows on the HITACHI but I'm unsure of how to partition it to ensure my performance is as good as possible. So what are your recommendations for the partition size for the OS on the HITACHI ?
Well this issue is really simple, I have two operating systems: Windows XP Home Edition and Ubuntu 10.04 Lucid Lynx installed on my computer, both systems are installed into a single HD, each on its own partition. My HD is 120 GB and I have 60 GB for Win and 60 GB for Ubuntu, my question is: Is there any way to safely change this partition size WITHOUT uninstall any of my OS? I've been using my computer for about 6 months with this partitions, which means that my two systems have some applications and programs installed and I feel really lazy about reinstalling Ubuntu and all my programs just because I want to change my partition size; of course if there is no other solution I'll have to do it, I know this works because I partitioned my Win 120 GB partition to accomodate Ubuntu when I installed it, using the partition wizard that comes with the Ubuntu installation program.
I have a single disk partitioned into a MBR then an extended partition in 3 logical disks. (hopefully that's the right terminology).But myboot drive is running out of space.How do I decrease one drive so that I can extend mz boot drive?
I have a 40GB HDD. It was originally partitioned as C: (Windows - NTFS) 15GB and D: (Data - NTFS) 27GB. I decided to have one of my sporadic forays with Linux, and using a combination of Acronis partition manager and the Windows Computer Management snap-in, did the following: C: (Windows NTFS) 10GB,D: (Data - NTFS) 5GB, E: (Transfer - FAT) 2GB, the remaining free space (20GB) formatted for Linux.I then decided to bin Linux for a while and revert to my previous partition layout. Using Windows Disk management, I removed the Linux partition and created a new partition. Then using Acronis Partition Manager I resized the C: drive to 15GB. Unfortunately, I'd forgotten to repair the MBR from having GRUB on it before I did this, so when it rebooted, I had to then boot up with a W98 floppy and repair the MBR. After having done that, and all the rest of the partition management, I have a size reporting problem! Right-clicking on the C: drive in My Computer shows the previous size as 10GB, as does Acronis.However, if I use Acronis to resize a partition, when I get to allocate the additional space, it shows the correct size! Also in Disk Management, the graphical representation of the partitions shows correctly, but the statistical info in the box above shows the previous configuration.
I just got a new system with a 300 GB HD, and am trying to install Windows XP Pro. It seems to only 'see' a maximum of about 131 GB.Is there a limitation to the size of the boot partition for XP? Is it possible to make use of the complete 300 GB as my C: drive?
I'm wiping my laptop HD and starting fresh. I want to install DOS and XP, and I've gotten a lot of tips through searching old posts, but I still have a few questions. There wasn't much out there for this particular combination.First, equipment. I've got a Toshiba Satellite M55 with a 75 GB HD. I'm installing HP Home. I have no floppy drive. I'm also using a 250 GB USB external hard drive for backups and such. Partitions: What size for each? I was thinking I'd have one for DOS, one for XP and applications, and one for data, although I'm planning to store most of my non-essential data on the external. Is it beneficial to also have a separate partition for the swap file? I read a recommendation in another thread for a 30 GB volume for XP/apps and a 2 GB volume for the swap file with the rest allocated for data, but I didn't find any recommendations for MS-DOS volume size.
I would like to reallocate my 2 partitions on my HDD, because I am running low on one of them . Can this reallocation be done in the Disk Management portion of XP? If so, how do I do it My C partiton has 17g and my F has 37 g. I'd like to even them out.
is there any way to get Windows Explorer or My Computer to show the size of folders as it does with individual files? If not, is there a Windows Explorer / My Computer type app thai will do so?
Some time ago, I must have inadvertently "pushed a button" and the page size for Internet Explorer changed from "normal" to "magnified". I can't figure out how to change it back. Going into control panel and changing the screen resolution size has absolutely no effect. (I never re-adjusted the screen size anyway). It's so annoying to have to constantly work the page bars up and down, back and forth! I think the same thing has happened to AOL.
Does anyone know how i can set internet explorer so that every time i run it the text size is default "larger"? it always comes up medium on my laptop, and that's too small. i always go to "view", "text size" and change it to "larger", but the next time i boot up, it defaults back to "medium". I want it to always stay on "larger".
Is there a size limit to a tree structure in Explorer? You know like; C:My sub Directory is very deep goes on and on and on an on and goes again and again etc etc etc. Is there a size limit?
I had right clicked on the taskbar, then clicked on cascade windows.Now I can not get my internet explorer window to go back to regular size when I click on the internet explorer E (not sortcut) on my desktop (I have to manually resize it).I want to be able to click on it & have it open to max size How can I get it back to normal?
I have finally decided to put my screen settings to 1024-768 or what ever that one is lol .. but my only problem now is the font size.. for example up top of this page where it says file,edit, view etc..is really small and same as the name thats down on my bar at the bottom of my screen where my open windows are they are really small and I want to make them bigger how do I do that? also .. my quick launch icons are super small can I make them bigger? I made the ones on my desktop bigger but can't figure out how to make the quick launch ones bigger.
I heard that the paging file should always be 1.5x the amount of RAM that is available on the machine. My initial size of the paging file is set to around 2GB and I was wondering if I should change the initial size to 3GB or put it to 'System managed size'?
