I'm trying to reinstall XP (currently using Ubuntu) and I'm having trouble with my disk. To make it clear--I have an official XP disk, and a product key. However, for some reason my computer absolutely refuses to boot from the disk, and I can't run the disk in Ubuntu.So is there anyway I can install windows XP without the disk? Do those downloadable floppy boot disks do the trick?
View 9 RepliesWhen I tried open defragmenter, it says windows cannot open this file, dfrg.msc, and need to know what program created it. I used jv16 PowerTools to cleam registry couple weeks ago. I guess defragmenter's broken. But how can I reinstall it?
View 8 Replies View RelatedIf I lost the disk that came with my PC, can I use any XP home disk and the product key on the side of the PC to reinstall?With out getting in any trouble?
View 3 Replies View RelatedI disconnected my harddrive from my Dell(DimensionL933r) computer and installed it into my Dell(Optiplex GX1) in an attempt to access the drive(which was not letting me in,Hanging at loading personal settings).I could not get the proper drivers or something so I did not get it installed.When I returned it to the computer it came from, its not coming up as installed. How do I install the hard disk with no windows or recovery console? Or the second question how do I get the hard disk connected to my good computer(Optiplex GX1) so I can fix it? Optiplex GX1 has Windows XP Pro and Dimension L933r has Windows 2000 pro. The hard disk is Seagate ST340213a
View 14 Replies View RelatedI am attempting to get into my Dell Dimension 8400. It may be I am having problems due to the SP3 update but I cannot get in to see if it is there and uninstall it. (It started going to the blue screen and I cannot do anything from any of the safe mode screens...they are just black with "safemode" in all 4 corners.) I have read up on the SP3 problems on the microsoft forums and found instruction on how to take care of it. It starts with the Recovery Console and the XPCD.
I get in there and it goes directly to "Setup loading files". When it tries to start windows I get this message: Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to our computer, and that any disk related hardware configuration is correct. This may involve running a manufacturer supplied diagnostic or set up program. Setup cannot continue. To quit
You think if reinstall with the special xp disk that came with my toshiba a70 will it automatically think I want to reset everything, reformating my hard-drive and thereby losing everything on my storage partition?
View 1 Replies View RelatedI want to reinstall Windows XP on our Toshiba laptop but I don't want to reinstall from the Toshiba disks due to the bloatware that the disks installs (like the disk utility, antivirus, etc software). I'd like to install the OS from a Microsoft Windows XP CD but wondered if the Microsoft disk would even install onto the Toshiba and if so, would the laptop function properly? Thanks.
View 3 Replies View RelatedI'm having problems with my window XP opening. I have taken my hard drive out and put in an enclosure, and backed it up. Now I'm trying to determine the product key to reinstall it with the rescue disk.
View 7 Replies View RelatedI reinstall Windows XP Home because My computer was messed up. It deleted all my files.. so on my desktop screen I don't have any Program Files Icons. BUT it still save my Files. I have my orginial files in my Documents folders and In my Program Files It has all the Programs and files that go with that program? How do I zap everything back on my desktop screen so I don't have to go Download each files as new again??? And I how do i get my Internet Favorite Links and my Notepad with my saved information in it? Yes I did try the "Start" and then program files and none of the programs are there.. BUT yet it is in my Program Hard drive C: Program files. with the Program and all it's content?
View 1 Replies View RelatedMy Help and Support stopped working about the same time I installed the free utility GhostScript / Gsview so that I could view postscript files. I tried posting a question on another usenet newsgroup, but the answer of: click on install on the C:windowsinfpchealth.inf file - resulted in a search for the file dataspec.xml in the C:windowsinfi386 directory - Unfortunately, such directory does not exist on my C: drive. Furthermore, the "K:I386" directory of my Original Win XP Home CD does not contain any file named "dataspec.xm_ or .xml".And beyond that, I ordered a new Win XP SP2 CD, which just now arrived by mail - and there is no "K:I386" directory on that CD, nor does the CD apparently contain any file called "dataspec" (including dataspec.*).Another effort toward resolution occurred via another usenet post I read, which suggested opening the XP command line feature and executing a system status command, that displayed enabled services - I used that method, and switched the Help and Support service off and then on again. Such action did not in-fact enable the Help feature (including, of course restart), despite the indication that the Help and Support service was enabled. I am, and have been, running a purchased-CD version of Win XP Home, with a downloaded SP2 revision (I have not installed the new Win XP SP2 CD). Basically, I want to find out the means and methods for enabling my Win XP SP2 Help and Support feature, that apparently has been disabled or otherwise rendered inoperative.Is a reinstall of Win XP possible and the best choice? What are the other options?
View 2 Replies View RelatedBecause of massive system porblems I have had t reinstall XP Pr with SP2. Before reinstalling XP I formmated the hard drives t give me a blank canvas to work. The reinstall worked fine but I cannot reinstall my Virgin Media Bradband service. Before the reinstall the bradband service was wrking fine..When I originall took out the bradband service it was through NTL. My cable modem states 'NTL' and the broadband disk has NTL' on it and I registered it tthough NTL. Now Virgin Media has bought up NTl annd I don't know if there is a compatibility prblem. Des somebdy else know?
View 1 Replies View RelatedI've been having some internet connectivity problems lately, and I believe it's due to some nasty spyware. I've already gone through all the steps to correct this (checking my DSL speed, anti-spyware scans, anti-virus scans, doing it all in safe mode, even reset my winsock.dll, etc.) but I'm still having problems with slow browsers. So now I think I'm faced with reinstalling Windows XP. My question is, should I do a format & reinstall, or is it better to reinstall Windows over my existing version? I have a Compaq Presario, and it comes with a Recovery CD.
View 14 Replies View RelatedI have tried putting in my windows disk but it still comes back I have been told to post a log generated by hijack this so here it is.
View 2 Replies View Relateddisk management error. unable to connect to Logical Disk Manager Service. At this point I've tried enough methods and internet - suggested fixes. Disk Management tool does not work :error "SERVER EXECUTION FAILED"
View 2 Replies View RelatedFor a whole month now I have carefully set up the new notebook described below after successfully, but laboriously, running a 1997 Dell PII300-SCSI 128-SDRAM Win98SE system for 8 years. I've now reached a point where I need help on several issues from some of you who are far ahead of me when it comes to running a modern system. There are no major problems so far, just some minor performance issues and a few questions in areas in which I know little or nothing.
One instance of a freeze (when running Norton Speed Disk) which turned out to be a bad cluster and was repaired by ChkDsk. One instance of stalling @ the "windows is shutting down" window (shutdown only). There have been two instances of noticeable decline in peak performance: A.) after installing Norton System Works. I immediately uninstalled Go Back, which really helped, and B.) after replacing one of the installed 256mb sticks of RAM with a 1GB stick from Crucial. I only mention this because I deliberately delayed installation until maximium system performance had been consistently sustained. [This is nothing major, just a slight delay and/or menus briefly going blank when starting some programs and a slight delay in application reaction time, which usually manifests itself at the start of sessions, and late sluggishness in long sessions] I only mention this in the event that I'm wrong and can be corrected, because I believe this must be a coincidence and not due to the hardware (unless there is a setting or something in Windows that needs changing to accommodate the additional RAM) - and the solution to regaining peak performance lies in Windows and/or Norton System Works....
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedI have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedMy computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedIt says that TOTAL SIZE = 39 GB And Free Space = 5 GB Which means that the size of all files on C is 34 GB But when I select all files including Hidden files and Right Click> Properties, its size of all files is only 27 GB.I did clear recycle bin and disk defragmenter C, but still the same. So why is that?
View 4 Replies View RelatedMy son gets the message "invalid system disk, replace the disk, then press play" , when booting up, he started getting it after inputting a picture from a "smart card" using his built in card reader. There is NO disk in the reader. If you hit any key the computer continues to boot "normal" It isn't a big problem, but a sign of something not being right.
View 8 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedI've tried it in safe mode too, and I get the same message for defragmenter "disk defragmenter could not start", for scan disk "..could not complete scan ", and system restore just does not respond when I select the restore point, I can only close it.
View 11 Replies View RelatedI recently formatted my drive and am trying to reinstall my WIndows XP Pro.When I put in the CD and the PC starts up I receive a message: "Invalid System Disk. Replace the disk and then press any key"I have already changed my BIOS so that it boots from the CD first. Not sure what the problem is? prior to that error message, it states that I should "press any key to boot from CD"...when I try to push a key nothing happens. I know my keyboard works since I used it to enter the BIOS.
View 5 Replies View RelatedI use Windows XP Professional OS on an Intel Pentium 4 PC with 512 MB RAM. Presently I have a single disk drive of 40 MB which has been divided into three logical drives C, D and E with total sizes of 20, 10 and 10 MB respectively.
I now want to add a second disk of 80 MB capacity and would like to increase the total size of the three existing logical drives to 40 MB each.Is there a feature available in Windows XP that will permit me to do this without having to reformat the existing 40 MB disk drive ?I have certain software installed in the PC for which the setup files are not available. Reformatting the existing disk drive will result in the loss of these applications. I would also not like to add more logical drives i.e. F, G, H etc.
Disk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedI have been looking on Ebay at used/refurbished computers for upgrading from my current and older P4 chip computer. One that I'm looking at says that it has a (legal and genuine version) of Windows XP Pro SP3 o/s installed on the custom built computer, but there's no disk. If I were to purchase a computer like this, and make a back up copy of that installed o/s on my own disk, will there be any difference than if I had received the original installation disk or manufacturer's restore disk?.....or would the installed (and backup) o/s be considered an "unlicensed" copy?
View 2 Replies View RelatedIm trying to repair install windows XP on my computer.I get up to the actual instalation part and it gives me this message:'Please insert the Compact Disk labeled ' VIA AGP Filter Driver Disk' into your CDROM drive (and then click OK. You can also click OK if you want files to be copied from an alternate location, such as a floppy disk'If i click cancel my mouse locks up and my screen flashes on and off and when i reboot it starts up the installation normally again but gives me this message halfway through the instalation.
View 2 Replies View RelatedIf I go into Drive Management under My Computer, and I see two "disks" both in the bar for "Disk 1" does this mean that all of Disk 1 has been split into two partitions but is still one physical disk?
View 14 Replies View Relatedif someone could tell me how to format windows xp home edition from the bios and not using the xp disk. I have already tried right clicking on drive c and selecting format but the message says windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no window is displaying the contents of the drive. Then try formatting again.
So I closed all open programs that I could but still no luck. Then I tried the format from running the run command and typing format c:but I get this message format cannot run because the volume is in use by another process. Format can run if this volume is dismounted first. All open handles to this volume would then be invalid. would you like to force a dismount on this volume? (y/n) so I type y for yes and hit enter then nothing
In windows XP Pro. Error message: there is no disk in drive Please insert disk. (Refering to A drive). this happened after trouble with an old cable. Replaced the cable and this message pops up on boot.
View 3 Replies View Relatedhow come when i reformat, if i do a full format NTFS i get an error at 100% saying the disk may be damaged..butu when i do a quick format, it works fine..?
View 14 Replies View Related