Ready To Put My Cannon Printer In A CANNON
Sep 26, 2005DOES NOT print the first page first if there is more than one page to print.E.G. If two pages...Prints page two first..If Three pages..Prints page 3 first then 2 then.
ADVERTISEMENT
Ready To Toss PC Into Garbage
Apr 10, 2006I don't know where to start with this but my PC is running so slow. It takes a long time for the PC to load when it first turns on. I have alot of useless programs running in the backround and I have no clue what they are for or how to turn them off. Alot of times my computer has a hard time running 2 programs together like AOL and MS Word.I want to delete a bunch of useless programs ( other people use my computer in my household too) and I do not know where to start for that either, I do not want to accidentally get rid of what my computer needs to operate and I am about to toss this thing into the trash. (well, I am just really frustrated). Anyway my sister told me about this site and said how helpful everyone is, and that her computer is running so much better because of comming to this forum.
View 7 Replies View RelatedMicrosoft Critical Update Ready To Install
Oct 30, 2008Yesterday I got a notice from microsoft that a critical update was ready to install. I downloaded the update after closing all other open windows. After the installation was complete it restarted the computer after which my compter would not completly boot up. I had to boot in safe-mode and do a system restore to get it working right. Today I have the same notice so I went to the windows update page, and saw the update was there. I didn't download it because of what happened before. So I went to my installed update history and it said it was successfully updated. I looked at the update again and it said the update was 0 kbs. Can you tell me what happened and why now the up date says 0 kps to be installed?
View 2 Replies View RelatedDelay Startup Program Till OS Is Ready To Run
Aug 26, 2007I'm not really fluent in M$. I have a couple of programs that load at boot time
that really should wait until the OS / Drivers / Support programs are loaded to
start. Is there any easy way to delay execution until the OS is ready to run?It curently is running from a registry entry and starts too early. It always fails,
and I have to terminate it, and restart it once the system is able to interact with me.it appears that Windows XP logs in users before its really ready to
interact with them?
Remove Message Updates Ready To Install
Jan 18, 2005There is this shield in the tray on the right hand end of my task bar that says that updates are ready for your computer, click here to install.Well, I don't want to install them and I would like to get rid of the shield so I won't hit it accidentally.There is also a security alert shield I would like to get rid of.
View 13 Replies View RelatedStarting Up Home - Novell Netware Ready Firmware?
Sep 5, 2007When I start up this appears on my screen for about 30 seconds or so.
Novell Netware Ready Firmware v1.00 (940 889)
No one was able to help me in here the other day so I scoured the web and I found this guy had the same problem I have.
System Restore - CDR101 - Not Ready Reading Drive R
May 11, 2009My wife's emachines (T3065) pc seems to have officially died. I have the restore CDs in which I have been trying to restore the XP Operating System. Mscdex.exe says it is already running CDR101 says Not ready reading drive R.
View 8 Replies View RelatedAutomatic Updates - Shutdown Ready Attempt Install Fail
May 30, 2009I have windows xp set for automatic updates. When I shutdown it says there are update ready and they attempt to install but fail.
View 5 Replies View RelatedAdditional Printer Icons In Printer/Faxes Window?
Mar 24, 2007In the printer and faxes window there are printer icons listed in addition to my default HP Printer. Whiy are they listed there and what do they do since you can't use them...or can you and if so, how? Two that are listed on my computer are:
Broderbund PDF Creator
Quicken PDF Printer
New HP Printer / Woke Up Printer At Shutdown And Startup
Aug 24, 2005I bought a new HP printer today. I had a hotfix installed at some point that shutdown and woke up my printer at shutdown and startup. The new printer isn't affected by this hotfix. Does anyone know where I can get this patch?
View 2 Replies View RelatedIssue Connecting Printer With Two Printer At Same Time
Mar 14, 2009Two custom PCs with XP Pro at same SP level. PC1 sees printer through switch. PC2 can not see printer. PC2 connects and sees printer when I cable the USB DIRECTLY to the printer instead of going thru a switch. Therefore, I know PC2 can print. Have tried 2 different switches. An A/B data switch and Belkin's 4x1 USB Peripheral Switch F1U401. PC1 works with both switches but PC2 does not.
View 9 Replies View RelatedCannot Change Printer TCP/IP Port Or Add New Printer
Jun 3, 2009We've had to change our address space and therefore the printer address has changed. I've changed the address on all but one computer. On this particular computer when I try to edit the TCP/IP port I get the message:
"An error occurred during port configuration. Access is denied."
If I try to create a new port I can select that I want it to be a Standard TCP/IP Port and then it tells me:
"Specified port cannot be added. Access is denied."
Printer Problems With SP2 And Network Printer Unless Lo..
Aug 17, 2005I have connected 3 new PC's on a P2P network, and connected a HP 4610 Color Laser Printer via a JetDirect 175 print server. On one PC, I can only print from the Administrator account. The other 2 computers work fine. On the one that is having issues, when printing a test page I receive a "Failed to Print" error mesage, and looking in the printer jobs menu, it shows that there was an error printing. The
Administrator account can print fine from this machine.
The user accounts are "restricted user" accounts on all 3 computers.
All 3 computers are exactly the same type, and all have the latest
updates.
Printer Spooler Stops When Trying To Add A Printer
Aug 24, 2005After a system crash all printers are gone and when trying to add a printer I get the message:
"Operation could not be completed. The print spooler service is not running" After starting the service manually and trying to add a printer I get the message:"Operation could not be completed" and the service is stopped again.I looked at some of the previous answers and related topics (like article nine, and Q324757
Get An All-in-one Printer Or Stand-alone Printer?
Oct 10, 2005i have seen some comments on forums that there are a lot of problems with all-in-one printers.
i should just buy a stand-alone printer and separate scanner?
Printer Spooler Won't Stay On - Printer Spooler Service
Mar 10, 2008I'm a tech at a college and am working on this computer that the printer spooler service won't stay started.You start up the machine and go to printers and faxes. There are none listed (of course cause the spooler isn't running) You click on add printer and it tells you that the service isn't running. So you go to run services.msc, printer spooler says it's stopped so you start it. It will then run until you try to print something or go to printers and faxes in the control panel. Basically as soon as you open the window the printer spooler service stops.Does anyone know a fix for this. Last time it happened one of my co-workers found a tool to fix it but we haven't been able to find it since and all the researching I have done leads me nowhere
View 8 Replies View RelatedNot Allowed To Use Printer
Oct 16, 2007I have setup my three printers for internet shraring, when i goto http://doamin/printers > click on the printer > connect > it asks for username and password, i give, and it gives some error saying i am not allowed to use printer.
View 5 Replies View RelatedPrinter Not Using Genuine Ink
Jun 21, 2005My new Epson inkject printer has used up all the original inks supplied and I've fitted compatible cartidges. But I now get a message when I try to print saying that I'm not using genuineink! Does my new C86 now actually PREVENT me from using compatibles? If so, is this legal?
View 13 Replies View RelatedPrinter Compatibility With XP
Jul 2, 2005I have an OfficeJet 710, when I load something to scan, fax or copy the Document Manager box does not come up. I have tried to uninstall and reinstall the printer but that doesn't help. I think my problem may be that when my computer was upgraded to Windows XP, they didn't include my printer therefore, it isn't compatible with my system.I can still copy, fax and print, but, only from the printer itself. Not from the Document Manager.
View 9 Replies View RelatedPrinter Won't Work
Jul 15, 2005Now my printer won't work. WIN XP and the printer is Lexmark X73. It was working, but now system won't recognize it.
View 8 Replies View RelatedTwo Printer Don't Work
Nov 17, 2007I did a "clean" install of Windows XP Pro Version 2002 SP2, replacing the corrupted OEM XP Home version installed by CompUSA. Since then, my two printers don't work. One is a Brother HL-1440 laser printer, the other an HP officejet 6110 all-in-one. I reinstalled the drivers for both, even went online and downloaded the most recent version of the 1440 driver. No joy. Clearly, I've done something wrong, but what?
COMPUTER: HP Pavilion 7935
AMD Athlon processor
1.30GHz, 624megs RAM
You never know how much you need your printers until the day you can't print.
Cannot Reinstall Printer
Jul 9, 2005i was having problems with my printer i unstalled it. tried to reinstall and a message comes up 16 bit sub file not compatibale with ms-dos and windows i do not know what this is help.
View 6 Replies View RelatedSharing Printer?
Oct 6, 2005I just bought my wife a Dell Laptop with wireless capability. My desktop is in another part of the house with a printer attaced. I would like for her to be able to use my printer when she is in the kitchen printing out recipes etc.
I wentthru the Control panel, Printers and Faxes, right click etc and checked "sharing" on the desktop that has the printer attached. I am not having much success getting the laptop to print.
I have Windows XP on both computers.
Redirect LPT Port To IP Printer?
Jun 22, 2004I got and DOS program that need to print to to network printer. the only way to acces that printer is by IP adress. So, is there a way to redirect an LTP port to an IP printer ?
HP Printer It Dose Not Install
Jun 23, 2005I have a HP Officejet 710 All-in-one,when I try to install my printer it dose not install,I keep getting a message,C:WindowsSystem32AutoExec.NT.The system files not suitable for running MS-DOS and Microsoft Windows. Applications.What can I do to install this printer
View 3 Replies View RelatedXP SP2 Is Not Detecting Any New Printer Attached
Jun 20, 2005My XP SP2 is not detecting any new printer attached. Both parallel and USB ports are not being detected. When I connect the printer and reboot, its like nothing at all has happened. The PC sits there finished booting, calm and quiet. They were being detected and installed some time ago. I suspect it might be a window corruption.. or some registry problem. Is there any way to refresh the windows registery so that it will start picking up printers again? Other devices like memory stick, external hard disk etc. are being picked up and working fine with USB
View 1 Replies View RelatedHow To Get Rid Of Printer Icon In Taskbar
Sep 20, 2005How do i get rid of the stupid little printer icon in my taskbar? it is a network printer (set up on another ocmputer and im networked with that computeR)
View 1 Replies View RelatedPrinter Not Working With USB2
Aug 17, 2005Two years ago I bought and installed a USB2 Card on my PC (Windows XP with SP2). Last week when I bought a new Printer (Canon MP 750), which uses USB2. When I connected, IT WOULD NOT WORK; but when I connected to a USB 1, IT WORKED, albeit with a message that"IT WOULD WORK FASTER WITH USB2" and inviting me to "clickhere" to find a suitable Port. I did this, of course, but was met with a message that"NO HI-SPEED USB HOST CONTROLLERS ARE INSTALLED ON THIS COMPUTER".
View 3 Replies View RelatedPrinter Locks Up Computer
Feb 10, 2006My printer locks upp my entire WinXp pro when telling it to print something out.There's nothing wrong with the printer itself or the cables attached to it, a've checked on another comp. Also tried to reinstall the LPT1 port and the drivers several times without no success. Even checked so that there's no other software that interferes with the printer drivers. and did run a virus check, both in Win and in pure DOS-mode, nothing. Starting to suspect that the LPTport on my Mobo- ASUS P4P800E Deluxe is screwed.The setting in BIOS is set to ECP as default and can't be manipulated.
View 1 Replies View RelatedPrinter Configuration Deployment
Jan 16, 2008We've got upwards of 400 workstations running Windows XP SP2. They also have the Novell Client 4.91 SP4 and network printers are managed through NDPS. Several months ago 20 new printers (IBM Infoprint 1532) were deployed across our LAN. Today I was told that the following changes need to be made by February: 1) In the printer driver properties, Enable the Duplexer 2) Under printing preferences, set Duplexing as the default. I was told that we techs need to physically touch each workstation to implement these changes.
View 2 Replies View RelatedUSB Ports Not Recognize Anything Except Printer
Oct 14, 2005I recently ought an E-machines computer running XP MCE w/SP2. It has an AMD 3400 processor and 200GB HD and 1MB RAM. I had transitioned all of my files and applications from a Windows 98 machine using Aloha Bob's PC Relocater. Everything seemed to work fine, however, my USB ports will not recognize anything except my printer (no external flash drives or my digital camera - software is loaded onto the computer). I had contacted E-machines tech services and they asked me the usual stuff, like disabling the ports and restarting the machine, check the BIOS to ensure they are enabled, etc. Now they are suggesting I run a ''Non-Destructive'' System Retore. Naturally I will back up my files and apps on DVD, but my concern is will I be able to reload the apps to which I do not have disks for? Is there something elese I should do prior to running the System Restore (in SAFE mode??). Also do you think this will work and restore my USB ports?
View 8 Replies View Related
