Recently I accidentally noticed that all 4 drives on my personal computer were being shared (C: 2 mirrored drives, F, G, H external drives). My login has admin rights, so thru drive properties Sharing, I disabled Sharing for each drive. Thru Network Connections/ Local Area Connection/ Properties/ General I also removed "File and Printer Sharing for MS Networks"
(I noticed on the Advanced tab that "Allow other network users to connect through this computer's Internet Connection was checked and grayed out so I was mysteriously unable to disable this...) Problem is everytime I reboot the computer, the drives show up being shared again although the "File and Printer Sharing for MS Networks" protocol does remain disabled so I have to disable each drive again. I have never chosen to share my drives, don't wish to and am concerned about the insecurity and my inability to permanently disabled the sharing. how to stop the sharing or what might be causing this?
I got a new system assembled a month back and after 15 days the stop error began to happen (this was after my bro tried to transfer files from his iPod & it didn't happen). I looked up a lot of forums but didn't find this one and couldn't figure out what the problem might be. Restored system, disabled services, but nothing worked. Finally I got the C: drive formatted and Win XP SP2 reinstalled. Didn't install unnecessary/extra software this time. But I found this site a day before getting it formatted, so saved the last 5 minidump files. And the day after the reinstallation, it has started happening again. The first time it was the bcmndis.sys file -- Airtel Beetel 220bx modem -- connected with the USB; couldn't find another driver for it online.
*** STOP: 0X00000024 (0X00190203, 0X82ECA898, 0X0000102, 0X00000000) This is the blue screen i get when i disable restart on errors. For what ever reason i cannot access this Hard Drive. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode............
I have usb drive on my desk top 2 in the front and 4 in the back only one in the back is working for my printer when I plug up my mouse it does not recognize my mouse I tried other plug mouse
I Plugged up a flash drive to get some pictures to print and the computer froze. It said that it had an I/0 error on that device.Well I restarted the computer and when it came back up, it said STOP: c0000263 {Driver Entry POint Not Found} The system Rootsystem32driversikfilesec.sys device driver could not locate the entry point IoGetDeviceAttachmentBaseRef in driver ntoskrnl.exe?SO now I cant do anything with it.it only comes up with that and is blue.
Multiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
I want to downgrade the factory loaded Vista to XP pro on my Acer Aspire M5640 desktop. I found some detailed instructions on line for doing this, but I don't get very far before I get a blue screen error message while the computer is in the process of booting up from the XP disk and loading the files while in windows set-up mode. It reads as follows: "A problem has been detected and windows has been shut down to prevent damage to your computer.
"If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: "Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B (0xF78D6524, 0xC0000034, 0x00000000, 0x00000000)
having my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
My computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I find out which/if this is associated to a particular driver so I can possibly correct it?
Major virus infection on computer resulted in fdisk and reformat. I used Win 98SE to fdisk and reformat, as I couldn't for the life of me find a format on the Dell Operating reinstallation CD. (could be first mistake)
Used Win 98 SE startup diskette to start system w/CD rom support.
Navigated to D: Drive which containe the XP OS reinstallation. Navigated to I386 folder and typed WINNT to begin reinstalling files.
Start WIn XP setup and began copying files to HD.
Screen shows: The MS-DOS based portion of setup is complete. Setup will now restart you computer. After your computer restarts, WIN XP Setup will continue. Remove floppy, etc.
Computer restarts - did inspection of system, shows Win XP Setup, loading files (drivers, controllers, etc.)
Starting windows - Welcom to Setup: 1. Setup - press enter 2. Repair (using Repair Console) 3. Quite - F3
Pressed enter
Next message:
Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer. This may involve running a mfg supplied diagnostics or setup program.
Setup cannot continue Press F3
System then attempts reboot, attempts installation again by booting from HD. Then error message:
Dell Deminsion 4600 series p4 processor @2.4 GHz 512 MD DDR SDRAM @ 400 MHz 128 MB DDR NVidia GeForce FX 5200 graphics card 80GB 7200 RMP Ultra ATA HD Win XP Pro SP1 48x/24x/48x CD-RW Drive SoundBlaster Live! w/ 5.1 support
I have looked on MS site for the error code and think I understand that the problem is either a hd controller device driver is not installing from the Dell Reinstallation CD and therefore stops the installation of the software. How I can possibly extract and install the driver setup may be looking for.
STOP 0x00000050 (0x8CCC1345, 0x0000001, 0x808A65A1, 0x00000000) These both happen when installing windows, either when at 95% of copying files or when booting into windows.
I use to be able to share my printers over my network , but since adding service pack 2 for windows xp , when i try to connect to my printer over the network , windows displays a message saying.' The driver isnt installed ; browse for driver
I recently came back to cable modem, and set up my linksys router. hardwire to desktop, wireless to laptop. internet works great on both, but can not share. checked the share settings on both, checked computer and workgroup name, and no luck. I am not real savvy on computer knowledge but open to try. By the way, this used to work when it was initially hooked up.
We have a 6 user office (Mac/Windows) networked with Workgroup. One of the computers doubles as a desktop for the secretary and file server. The computer runs Windows XP Pro. This computer shares a folder and everyone can access it. I need to restrict access to this folder or a subfolder.I have used Administrative Tools to setup users and groups. I can't find a way to setup privileges and restrict access to a folder depending on the user.
I have a minor problem in that fairly frequently my system will freeze when I close a window by clicking on the top right "X", although it seems to close normally when using the "Edit-Close" function. On freezing, Taskmanager indicates that "explorer.exe" is running 100% CPU resource, and can only be closed by rebooting via reset button.The only thing of any possible concern I've noticed is that there are 11 apps sharing IRQ7, while my laptop with the same OS and a similar set of applications does not even use IRQ7, and has no more than 2 apps on two IRQs.There may be no correlation between the freeze problem and the IRQ setup, but it makes me uneasy.
I just bought my wife a Dell Laptop with wireless capability. My desktop is in another part of the house with a printer attaced. I would like for her to be able to use my printer when she is in the kitchen printing out recipes etc. I wentthru the Control panel, Printers and Faxes, right click etc and checked "sharing" on the desktop that has the printer attached. I am not having much success getting the laptop to print. I have Windows XP on both computers.
I have two computers at home which has both WinXP installed. One has a internet connection(host)(DSL) and i wanted my other computer(client) to onnect through host internet connection. My host has 2 lan card installed one supposed to be for internet sharing. I already run WinXP Network Setup Wizard on both computers and both has same range of IP buth still i cannot share my internet connection.If I will be using cross cable connection, still anything else i need to configure aside from running Network setup Wizard and checking the Allow others to connect to this internet connection?Is it possible to use a hub to share internet connection, since I dont have a broadband router?How about using a wireless network because i do have one, how can i share internet using access point. How can i configure it? Is it also possible that i use hub so that i have my access point connect to it and i still have ports to connect using utp cable network.
copy the following to notepad, save as shares.inf, right click, install ;****COPY**** [Version]Signature= "$Windows NT$"LayoutFile=layout.inf [DefaultInstall];AddReg = Reg.TestSection.AddDelReg = Reg.TestSection.Del ;[Reg.TestSection.Add] [DelReg = Reg.TestSection.Del][Reg.TestSection.Del]HKLM ,"SoftwareMicrosoftWindowsCurrentVersionExplorerRemoteComputerNameSpace{D6277990-4C6A-11CF-8D87-00AA0060F5BF}"HKLM ,"SOFTWAREMicrosoftWindowsCurrentVersionExplorerRemoteComputerNameSpace{2227A280-3AEA-1069-A2DE-08002B30309D}" ;****END COPY****
I have an XP machine that I'm trying to setup as a fileserver, but when I go into permissions, the only thing that shows up is the local machine, not the domain or any of it's computers.
-Is the computer connected to the domain: Yes.
-Can the computer ping other computers: Yes.
-Can the computer access other network shares? Yes.
I am trying to set up a shared folder on an XP pro machine and give permissions to only certain domain users. Problem is when I go to permissions, then "Add" then the only location I can see is the local computer - no option to see in the domain for users/computers on the domain. WIN2000 clients bring up the option of the local computer name and the domain no problem.
1. I would like to share a folder between 2 computers. I created a shared folder on Windows 2000 computer. I am unable to connect this shared folder by using My Network Places between Windows XP and Window 2000 computers or by using \computernamesharename link.
2. There are 2 folders on my computer with following link C:Documents and SettingsAdministrator C:Documents and SettingsAdministrator
They have same number of files. If I try to delete a files from one folder, the same file from both the folders get deleted. I just want one set of folders.
I seem to have a problem sharing the Internet between 2 pcs. The Internet connection lasts for a while & then, later on, it doesn't work. Is there any reason why this might be? The 2 pcs have Windows XP & they are both configured using the Network Connection Wizard. They should both work fine but they don't.
i try to share internet connections to play my xbox. Let me tell you what i am trying to do first and the error and i am getting. I have my internet connected threw USB dirctly to my modem. Then i have my crossover cable plug into my Xbox and the other end in my ethernet port.. And when i trying to bridge the connections i get a error on my xbox something about the DNS sever i try to fix that but i think its because I am not sharing my internet connection.. This is the error i get when i try. An error occurred while internet connection sharing was being enabled.The specified service does not exist as an installed service And here a screenshot of the error you can make it bigger for you can read it..
I'me having a bit of a job trying to share my printer with my other pc I downloaded network magic which is supposed to configure printers to share it did'ent work. I've tried to do it manually but when I click on sharing I get a message 'in order to share this printer an administrator must configure windows firewall to permit the sharing of printers.' I'me the administrator and I thought I had done this.
I have been experiencing a problem with sharing folders between two Windows XP Pro (SP2) Computers. I have searched the internet high and low for a solution, but i have not found one. This problem is driving me insane.When sharing folders between the two machines I AM able to access the folders and find them in "My Network Places". The problem is, while I am able to view the contents of all shared folders correctly, some files will not open and i will get a "you do not have appropriate permissions..." error. This is very random.... for example: say I have a shared folder with 30 files in it... I will be able to open and copy/move most of them, but there are several that will not open (when i try to launch these 'problem' files [zip, exe, wmv, whatever] I will get the error mentioned above). I dont understand how files in the same shared folder will act so differently.
1. When I go to access my firewall I get an error saying "Windows firewall settings cannot be displayed because of the associated service is not running. do you want to start the windows firewall/internet connection sharing (ics) service?" I then hit yes and "windows cannot start the windowsfirewall/internet connection sharing (ics) service"I went to microsoft and found info on it but as I read all it seemed to say was "blah blah tech talk tech talk blah blah blah" I got no where...I really did try! Did something take over my firewall should I be scared?
I have setup the two external HDD's as share on the primary. I can see those HDD's through "My Network Places" on the secondary computer, but I get an error stating that I must see the administrator for access permissions. Is there a clean and safe way to share these 2 external hard drives from the secondary computer by leaving them connected to the primaru computer?
