I seem to have a problem sharing the Internet between 2 pcs. The Internet connection lasts for a while & then, later on, it doesn't work. Is there any reason why this might be? The 2 pcs have Windows XP & they are both configured using the Network Connection Wizard. They should both work fine but they don't.
i try to share internet connections to play my xbox. Let me tell you what i am trying to do first and the error and i am getting. I have my internet connected threw USB dirctly to my modem. Then i have my crossover cable plug into my Xbox and the other end in my ethernet port.. And when i trying to bridge the connections i get a error on my xbox something about the DNS sever i try to fix that but i think its because I am not sharing my internet connection.. This is the error i get when i try. An error occurred while internet connection sharing was being enabled.The specified service does not exist as an installed service And here a screenshot of the error you can make it bigger for you can read it..
1. When I go to access my firewall I get an error saying "Windows firewall settings cannot be displayed because of the associated service is not running. do you want to start the windows firewall/internet connection sharing (ics) service?" I then hit yes and "windows cannot start the windowsfirewall/internet connection sharing (ics) service"I went to microsoft and found info on it but as I read all it seemed to say was "blah blah tech talk tech talk blah blah blah" I got no where...I really did try! Did something take over my firewall should I be scared?
I do not have an "Internet Connection Sharing" section when I go into the wireless network selection properties, and then click on advanced. All that is showing up is the windows firewall. I am using a Linksys Wireless G PCI network adaptor. I am on Windows XP, professional, 2002, SP2. Someone I know has the same system, but it is the media center edition and it has the ICS section under the advanced tab... I'm not sure if the media center edition has anything to do with it or not. Am I missing a driver? Is there anything that I can do about this?
i want to share a broadband internet connection between 2 computers. One is aready connected. what is the cheapest way to share the internet connection?
I'm trying to set my desktop up as computer that would allow others to connect through it. The desktop is upstairs and connects wirelessly to my router downstairs. I've loooked at some guides that explain how to set it up for sharing and they say to right click the connection, then go to properties, then advanced tab, and there will be the options for internet connection sharing. However, there are no options there that relate to "Internet Connection Sharing" only Windows Firewall with a "Settings" button.
I am doing volunteer work at an organization that is all volunteers. Since I have some IT skills they have asked me to manage their workgroups network of 8 computers. (This is really out of my field of expertise which is Oracle DB administration, but I enjoy the challenge of getting through the learning curve.)
To build up some hands-on knowledge and experience, I have acquired an extra computer and have installed Windows XP from scratch, i.e. on a completely re-formatted disk. I now want to connect it to our LAN in order to use printer and file sharing and our internet connection which is via a router (?residential gateway?).
How to config Internet Connection Sharing in Windows XP but the instructions do not seem applicabale to our configuration (please see the last paragraph above). I have also tried wokring with the chapter "Setting Up a Workgroup Network" in David Pogue's book, "Windows XP Pro, The Missing Manual". After all is said and done on the client as an administrator or non-administrator, any time I try to go to a webpage via Internet Explorer, I get the message "The page cannot be displayed".
How do i stop a particular computer(client) from accessing internet from host computer running internet connection sharing? i have shared Internet by Internet Connection Sharing on Windows XP SP2. i have other computers running windows 98SE, at first the computer didnt get configured automatically, i had to create a network disc and run it on each PC to get internet access on those machines. Now i want one of those PC to be not able to acsess internet.
Laptop one running winXP home edit. Connecting to broadband via usb client device. Connecting via rj45 crossover cable to. Laptop two running winME. I got to the point where I could actually run the "set up a home or small office network" on both computers, which enabled me to tenuously connect to the internet via the crossover cable. However, immediately after running the "set up....." on the XP machine it disabled the driver GUI for the usb client card. I was still connected, but couldn't see what I was doing.
There are many tutorials available out there, but there are so many permutations of OSs, hubs, client devices, and routers, that it's hard to find something that makes sense for me. I downloaded the "Microsoft Networking Guide" from msn and throughout it states in no uncertain terms that you must NOT use a crossover type cable. Yet in the help notes on the very same site there are plentiful hints on how to use a crossover cable. I'd like to use the crossover since it is "supposed" to be the simplest methond. But if I must go out and buy a hub device, I guess I must.
I had accidentally created a LAN connection, disabled, removed it, and had discovered the Internet Connection Sharing had disappeared, under the advanced tab of "Wireless Internet Connection". I have looked, and looked for a solution to this problem but can not find one. I had found a workaround, tried it, but it just caused my computer to freeze up.
I'm trying to share my internet connection with another connection. It's a wifi dongle for a wireless handheld. In order to get connectivity on this dongle, I need to share my connection. But when I attempt to do this, I recieve an error: "An error occurred while Internet Connection Sharing was being enabled This specified service does not exist as an installed service."
I'm using WinXP SP2 and I've searched on the Windows.com site for a while and downloaded some help files. But, it gives no indication on how to get ICS if you are getting this error. Does anyone have any tips or ideas on what I can try or how to get ICS? I've also reinstalled SP2, but I'm still not able to share my connection and recieve the same error. In Services I have Windows Management Instrumentation and Remote Access Manager but I don't have Windows Firewall/Internet Connection Sharing listed.
My main computer's (XP, SP3) Internet connection is shared among 3 other machines via ICS. However, one machine (XP, SP3) - which runs a couple of P2P programs - usually loses its connectivity (even file sharing) after a few days. I'm running Kaspersky Internet Security on the main computer. I've tried disabling it (for testing purposes) to no avail. I've also disabled Windows Firewall on both machines with no improvement. Using a router is pointless because it freezes after a few days (due to the P2P programs). I've tried 4 or 5 different routers (even the "good" brands).
Is it simply an overload in terms of the number of connections possible? Does ICS, in principle, face the same problems as a typical router? Because I've even tried reducing the number of P2P programs to just one and also limiting the number of connections it makes. (Not to mention "fixing" the 'tcpip.sys' limit on both machines.) Any ideas what the problem could be and how to fix it?
Right after my computer is finishes booting, suddenly there's a prompt telling me that Internet Explorer wants to change my Internet Protection settings. Then it asks me if I want to give IE permission to change these settings. Of course not (I think?). And the problem is still there. I connect with Verizon DSL, but when I go on Internet Explorer, the browser doesn't work properly- it says "Web Page Unavavailable While Offline"- what's up with that?! I even checked the status of my connnection- "Connected"! It's just retarded.
I have two computers at home which has both WinXP installed. One has a internet connection(host)(DSL) and i wanted my other computer(client) to onnect through host internet connection. My host has 2 lan card installed one supposed to be for internet sharing. I already run WinXP Network Setup Wizard on both computers and both has same range of IP buth still i cannot share my internet connection.If I will be using cross cable connection, still anything else i need to configure aside from running Network setup Wizard and checking the Allow others to connect to this internet connection?Is it possible to use a hub to share internet connection, since I dont have a broadband router?How about using a wireless network because i do have one, how can i share internet using access point. How can i configure it? Is it also possible that i use hub so that i have my access point connect to it and i still have ports to connect using utp cable network.
my cable is not working properly.Every 15-20 minutes my internet connection is broken even though the modem is online and there is no problem with the cable coming into my house. I have to reset the cable modem and then it works for another 10-20 minutes until the next cut. Ive had this problem before (last time i changed computers) but cant remember how it was resolved. I already talked to my ISP support but these guys are brain damaged or something and cannot even comprehend my problem and all 3 actually concluded that i had somehow contracted some killer virus immediately after connecting my computer and this virus was the root of my problems
I recently reinstalled Windows XP Home on a friends computer, but when I went to create their dialup connection to the internet, I couldn't.I went into the 'Internet Connection Wizard'. Told it that I was connecting directly to the internet. Then I told it I was going to set up the connection manually. But whenever the option comes up to setup a dial-up or broadband connection, the dial-up option is greyed out and unselectable.In device manager, it shows my modem as being fine. It's installed with no conflicts.
I'm trying to help a mate set up a wireless network to share his new adsl connection between 2 desktop pc's in different parts of the house. He has a modem/router and a switch/wireless ap device, and a usb wireless dongle each machine. Have had all sorts of problems, solved one by one, but for this last one. One of the pc's works fine (Win XP Home), while the other one times out with any internet access attemp (Wn XP Pro sp2). He doesn't need the pc's to talk to each other, only to the internet. one is his and the other his wifes, and they both have work stuff on their machines and don't do lan parties etc. He just wants to get online at the same time. From the machine that doesn't work, I can ping the other pc, the AP, and the modem router fine, but it can't find anything beyond the modem.
If I ping a domain name rather than ip address, it can't even find a dns server to resolve the name. I have spent hours going over and over all the settings. Both machines are set up identically in every respect (relevant to the network that is) but for the fact that one is XP Home and the other XP Pro. Both use only Windows Firewall, and in fact for testing, I've disabled firewall completely on the recalcitrant machine. Both use the same AP, switch, router and modem, and get their IP from the same dhcp server in the modem. I can't figure out why one is working, and the other isn't. My last "long shot" is some difference between XP home and XP Pro. I've never used Pro before, but figured that there shouldn't be a difference for the simple stuff I need to achieve here. but hopefully, I might be wrong?
I have four computers on a LAN (Local Area Network)Three of them are on Windows XP Professional, the other is in Windows 2000 Yesterday, The Windows 2000 system ceased connecting to the internet. I went and checked all of the TCP/IP Information in it and I can find nothing wrong with it. About fifteen minutes later my XP ceased connecting to the net, I checked all info there and as far as I can see there is nothing wrong with my system settings nor hardware.
I got a Toshiba with windows XP.. Its an older laptop and runs slow.. which is fine for what i need it for.. It is connected through a Dlink Cable modem. Recently moved and had a DSL connection of 3 years no problems. Had to switch to cable broadband. The lights all light up solid no problem. Network cable connected to no problem. Problem : NO internet
Unplug netowkr cable from cable modem (get the network cabled unplugged in windows, so it is seing the modem or atleast talking to it)Tried using the windows xp network srtup wizard. I did that hub one (connected thourhg a hub) and i tried the direct connection (goes from modem to computer).
After long periods of my internet connection being idle (2+ hours usually), all programs requiring internet access are unable to connect. By idle I mean I leave to run some errands with no programs other than Zone Alarm running. My DSL modem still has all lights flashing and active. There are a couple other scenarios where this occurs as well. Ex. I'm playing WoW for extended periods but not using the internet through any other program, then upon alt-tabbing no other applications are able to connect to the internet even though WoW is still connected and functioning. Rebooting the router/modem doesn't fix it, but rebooting the comp does.
I have a number of XP computers (all SP2) connected to the Net via a wireless modem/router. Everything was fine until a few days ago when my connection speed dramatically slowed after being online for a few hours. This happens to all of the PCs in my home - so it's nothing internal to my PC. I tried to transfer a large file across the wireless network and it transferred fine (5Mb in 10 seconds). I can also connect to the router's web management software without problem. So it's not the wireless connection. Which leaves either my modem/router or my broadband connection. The router's "DSL" light is always on which infers that my broadband connection is OK. So that leaves my modem/router.
One of the most frustrating things to have with a computer is a slow internet connection and 56K is about as slow as it gets these days. I feel the pain that 56K users have and hope that by following this thread they can experience a faster more reliable internet connection. There are a few things that one must understand prior to tweaking their 56K connections. The first is that it is actually a 53.3K connection since that is the speed that the FCC limits you to, on top of that most dialup users actually connect in the 40,000 – 50,000K range, which is excellent by dialup standards.
I'm having a bit of trouble with my internet connection at home. I have recently reinstalled Windows XP home due to corruption of files but previous to that my internet connection did not work. However, since the install i have been unable to establish a continuous connection. It starts and stops for no reason at all. I have been online and it loses connection saying there is no dial tone. A connection can be lost/found for no particular reason.
Is there a way for me to create a two key combination that will toggle my internet connection on/off? I am right clicking a shortcut to my connection and choosing "disable". I'd like a less cumbersome method.
I have no problem connecting to the internet however I constantly get this message while surfing the net. No Connection to the internet is currently available. To view internet content that has been saved on your computer, click work offline. click try again to connect or WORK OFFLINE try agian. My internet connection is fine.
I have a dell 4600 dimension operating on windows XP, and my ISP is optimum cable. It's been coming on slowly, but my connection to the internet, via internet explorer is extremely slow. I also experience long waits opeing new windows, or attachments from a site, as well as rply and fwd on E-mail. Once connected moving from site to site is normal speed, but as stated other openings take up to 2-3 minutes to connect. My ISP says my connection is fine, but I do get a connectivity icon on occasion, causing me to click repair, and it goes away.
I seem to have a connection problem, I first went to My Computer,My network places, View network connections.There, I'm supposed to see an icon signifying that I have a connection to the router Something like this: http://www.microsoft.com/library/med...ctions-new.GIF.In that pic shows the "connection icon" that im supposed to see. However when i went to view all network connections, there wasn't any connection icon there. SO, i created a new connection and the computer asked for a restart to complete the process. After the restart, i went back to the "view network connections" place and there was no icon there. i repeated this process many times and still get the same result.
While surfing along I simple loose my connection to the internet? I am running W2K sp4 completly updated, I have a Dlink router and a cable high speed modem (motorola) and my ip address is set to a specific IP I use RAdmin when away and that works just fine) and my routers IP is listed as both the default gateway and perfered DNS, DHCP is set on the router for wireless laptops.
Reestablish internet connection, from reinstalling all the drivers to Windows repair installation. This has caused a problem with the Product Key not working anymore.For some reason I can't seem to get an internet connection to establish. I can't even install the wireless adapter software due to some unknown error. This was all due to the TCP/IP not being available, almost overnight. No virus or malware infections at all.