when i try to repair it, it says i need to enter a password. i've never in my life send it a password for the adminitor (sorry for the spelling). how would i get around the password of the repair? or is there a program to recovery passwords for window's admin? sidenote, i can't start up windows without getting the blue screen of death. but i do in fact have another hard drive with windows.
View 9 Repliesi just got my desktop back after a year of sitting (no, i cant afford to buy a new one) and now i cant remember the password to log on. the OS is 2000 NT Pro which was installed JUST before the power supply went out-which is why its been sitting. the friend who installed it chagned my pass and also doesnt remember what it was/is. anyway, from my laptop, i made all the suggested boot discs to recover the password/s BUT it wont boot from anywhere but the standard mode. even when i get into safe mode, the log on box still pops up and asks for a pass. i am NOT compuer inclined at all ( i have to call tech support when i check my email, lol) so please make your replies in very simple, non-technical language. i assume this is the admin pass b/c even using "administrator" and "msg2000" (these are what my friend uses when she re-installs OS)doesnt get me in. is there a way to get into my computer w/o wiping it clean and re-installing the OS?
View 10 Replies View RelatedIt appears the password recovery disk feature only works with a floppy. Has anyone found a way to use a CD or flash drive instead?
View 14 Replies View RelatedI lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies View RelatedA friend of mine forgot the password for his pst file on outlook 2003... is there any way by which he can get his emails back / recover password for the pst file.would appreciate all your help and support in this matter
View 3 Replies View RelatedI downloaded password recovery, burned it to a disc but then this disc will not open in another computer when I am trying to open it from the bios boot screen.My windows log in is stuck on the administrator log in and my password is not working.
View 8 Replies View RelatedI was trying to repair a corrupt windowssystem32configsystem file using the recovery console - that did not work. Now, when I use the recovery console I am asked for an administrator password, which of course I do not know. A further complication is that the machine is configured with RAID (striped disks using Intel Matrix), so booting from any kind of recovery disk requires further drivers to be loaded. The ERD password reset tool I am using (not sure of the name but it is Linux based, and free) seems to allow support for RAID, but I can not get it to work (NTFS signature missing). I have tried 'fetching' the drivers from a floppy, but that does not seem to help. So where can I go from here? Are there any other password recovery tools that definitely support Intel Matrix Raid?
View 4 Replies View RelatedI am running win xp pro. I can log onto windows with no problems but I want to run the recovery console in dos. But for some reason my administrator password is saying its invalid. Is there any way to change it in normal mode. Or is the admin password different in dos than in normal mode?
View 3 Replies View RelatedFirst off, i have a 60gb ide drive for my windows installation (3 other drives for storage), and i got a 150gb Raptor X, which is sata. I cloned the 60gb boot drive onto the raptor, but it didnt boot, and said the HAL was corrupt. My guess would be that the hardware abstraction layer got all defunct when it saw the new sata drive, but was expecting an ide? After all that, i decided to run a chkdsk on the ide drive, and clone it again, to see if it booted. I used the recovery console on a windows xp pro disc, but alas, i couldnt chkdsk because i forgot my admin password. Stupid me.
View 8 Replies View RelatedA few weeks ago I did a scan with a registry repair program. Some how it deleted the certificate for the encrypted files on my external hard drive. Because of this I don't have access to any encrypted files on the drive. I've never intentionally backed up the certificate for this drive.Is there anyway to recover this certificate...without buying some expensive program?
View 9 Replies View RelatedI have a user who had tons of sensitive data not backed up. She was running windows XP and its NTFS. The problem is the Error told her to try to recover so she grabbed the factory recovery CD which in turn wiped evwerything out (though I bet it prompted her on that she won't admit it said anything about it all being wiped out). Needless to say her PC is back to factory defaults with NONE of her data she had on it. What is a good program that can go in there and try and recover this information right now she is crying and I have about 5 people wanting me to "do something". Main criteria - recovers from underneath a ghosted image, must work with NTFS and allow for file extraction.
View 2 Replies View RelatedHow can i start recovery program for Toshiba equium laptop with no disk. I know after restart is f1 or f8 or f10 do you know which one.
View 1 Replies View RelatedI am looking desperately for a program/bootdisk that will reset/retrieve an XP logon password on a FAT32 system. All the ones I've seen so far can only handle NTFS.
I tried to log on to the internet (dial-up). The dialer panel came up, I hit dial, and it closed. I tried again with the same result. I restarted hoping it woud fix it. It got the the Windows XP loading screen, then went to a light blue screen w/ dark blue bars at the top and bottom (the new bsod) and displayed two messages that said the same thing: autochk program not found - skipping AUTOCHECK After about five seconds the computer reboots and repeats the process.
After the BIOS boot and before the Windows XP load screen, there is a recovery option. I tried this and got into the Gateway System Recovery. It says "Starting Recovery..." with a progress bar and then goes to this BSOD: STOP: c0000218 {Registry File Failure The registry cannot load the hive (file): SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. At this point the screen just stays there and the computer responds to nothing but the power button.
May i know a software or program to hide,or password protect a folder (or a drive)if possible in inxp.something simple and free.
View 4 Replies View RelatedI created a folder with several files in windows XP. I then compressed and PASSWORD protected the files within th folder. Now i cannot remember the password for the files. How do I get passed the password protection program?
View 14 Replies View RelatedHoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
View 2 Replies View RelatedI had a Dell with XP Media Center Edition on it and I am going to make a new build. My question is, can I use the XP Media Center RECOVERY CD that came with the dell if I were to have a new CD KEY?
View 1 Replies View RelatedI have Windows XP Pro installed on IBM T60 Laptop.Whenever I start the Laptop up,the Windows Security Sey up Wizard appears and I wish to stop this appearing every time.In addition,if I fill in my Windows password on the security wizard the system says that I am using the incorrect password.Please can someone advise me how to solve these problems.
View 7 Replies View RelatedI ran the network setup wizard on both computers, when i go to 'view workgroup computers' and click on the one i want to connect to i am asked for a password, i tried the admin password and the password for the user that ran the wizard -- neither worked .
View 3 Replies View RelatedI have just installed a linksys wireless router onto my desktop computer to add a wireless laptop and for some reason, when the User Logon screen comes up. The hand cursor never becomes a cursor for me to type in passowords to user accounts. I went into safe mode and then into control panel and deleted the passwords for each user acct and now I can get into the accounts but how can I add the passwords again and be able to type them in. We have 3 user accounts on this pc and would like to have them password protected.
View 1 Replies View RelatedI was doing a clean up with Ccleaner etc and in my haste I did not take note of what I was clicking. Spybot Search and Destroy flashed up and I clicked to allow, or not allow as the case may be, to do something to, from what I can remember, 'WLON' or something similarly named. In any case, what happens now is that I fire up the computer, enter my password, the desktop briefly flashes up for a split second(no icons) and then it immediately logs off and goes to password entry again.
View 4 Replies View RelatedMy account on my computer (Win XP Pro SP2) is an Administrator account. Over a year ago, I got tired of entering my password because I an the only person that uses this computer. I did something so it would boot without the password screen appearing ( I don't remember what, but I think I left the password line blank).
Since the computer boots directly to my account, I am never prompted to enter a password; but if I use Power Options (and the computer sleeps), it wakes to the login screen and I cannot reenter my account. I have to reboot. On the login screen, I have tried leaving the password blank and entering every password I use, but I get an Invalid Password response.
Trying to recover my registry from being corrupted. I am in Windows XP Pro recovery console. But when I try At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp copy c:windowssystem32 configsystem c:windows mpsystem.bak. It says I cannot copy the file. The file cannot be copied.
View 8 Replies View RelatedI got Compaq Armada 1592 Its screen said password expired, enter old password, then the new password. I entered old password, tried all sorts of combinations of upper case, lower case I thought I could just bypass that screen and start as new user, but apparently
not.
I am currently trying to set up a log in for xp where the user changes based upon only the password you enter. in other words there will only be one user and it will change based upon the password you enter. i also want to be able to tell who logged on and when.
for example say i setting up a business computer that 20 people will use but i don't want 20 accounts i only want one and each people will have a different password and based upon the password they enter i will be able to tell who downloaded what and installed what by knowing who logged on. thanks for the help
had sp2 and other updates installed. uninstalled most of them because...well because i was trying to install
older software that worked before sp2 was installed.. anyway, now big problem. suddenly xp asks for password to logon, and this is really strange, i have never in my life had a password for my computer. so obviously no matter what i enter, the computer asks politely if i've forgotten the password
My Brother bought a used laptop from a stranger but it works and everything but the password. Here are more details: It's a Dell Inspiron 2100 and the operating system is windows 2000 professional. The laptop does not include a CD or Floppy drive but it has 1 USB port. now when my Brother bought the laptop we powered it on and it worked fine until a "Log On to Windows" box appear and you need to type a user name and password to log in but we don't have the password and we cannot contact the guy he bought the laptop from so what should we do?
View 2 Replies View RelatedA few days ago I tried to update my families pc to SP2 so I could get all the updates etc. It seemed to install alright, but then when starting up it gave me some drwatson.exe error which ended up freezing the pc. So I did what I thought was safest at the time and that was to go back to a restore point and then maybe try reinstall SP2. BUT, after restoring, windows suddenly showed the password/log on screens. I now can't log on as Administrator OR Guest. Nothing works. I've tried EVERY possible password that I could have used in the passed, but nothing works. So now I can't get into the pc at all. I've tried booting up in safe mode and logging in as administrator with a blank password, but that doesn't even work. I've read a lot about it online, and it seems the only solution would be to reinstall XP. But would that work as a format and erase some of my files and/or settings? Or would it just be like an upgrade?
View 5 Replies View RelatedFor a long time, I log on to my Windows XP by clicking on 'Default' without any problem. However, today, the computer did not startup smoothly until after running 'system checkup' automatically. Then, when the logon page came, I click 'Default' but it asked for password. I did try some words or left it blank but XP would not let me logon.
View 2 Replies View RelatedI looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies View Related