I'm new to these forums, but it looks like there's a ton of info here, so I wanted to give you guys a shot. I'm looking to upgrade my mobo and CPU, but not necessarily my hard drive. Can I just uprade the mobo and CPU with my hard drive the way it is now, with Windows and all? Or do I need a clean install or reformat or anything?
View 11 RepliesI have a perfectly good fresh install of XP. All works super...drivers, hardware, all software.You know that things not always work after a re-install.I like to upgrade my oldish mobo/cpu and then of course newer DDR2 RAM.Is there a way to make these upgrades without having to reinstall XP. I tried this before and of course XP doesn't load all new drivers automatically.I heard I can go into the XP bootup screen and do a repair.
View 6 Replies View RelatedI am somewhat of a newbie to PC. I have a computer with Windows 2000 on it and want to upgrade to Windows XP, so I go and buy the XP upgrade pack with SP2 on it. On the box it says its for users of 98, 98 Second Edition, and ME. It doesnt mention 2000 anywere ! So can I not use this to upgrade to XP? I havent opened the XP package yet , because if it doesnt work I dont want to waste my $99.
View 7 Replies View Relatedcan i load the upgrade of windows 98 to xp on two home computers?
View 2 Replies View RelatedI just bought a new MB and CPU to upgrade my rig. I currently have a Athlon XP 3000 with an Epox MB and am going to a socket 939 X2 4800 and a ASRock 939 Dual-VSTA MB.So the question is: Is there any pointers or short-cuts when my system requires me to perform a re-installation of Windows XP? Is there a way to just update the drivers needed for my new MB and CPU or do I just have no choice but to do a reinstall of XP? What about the differences between repair and a full reinstallation.
View 3 Replies View Relatedmy daughter has an older model sony vaio (pcg- fx220) running ms windows 2000 pro and is wanting to upgrade to xp. she purchased her upgrade software from her college vendor and they shipped her 2 discs. one is labeled ms windows xp professional with service pack 2 and the other is labeled ms windows xp professional x64 edition.
i am assuming the i should install the w xp pro with serv. pk 2 instead of the 64x version. in the back of my mind, there is some previously learned and nearly forgotten info regarding processors and hers is an older 750 pentium iii.
When I go to reinstall my XP Pro I'm getting a message that a problem has been detected and that windows has been shut down to prevent damage to your computer. It also says to disable BIOS memory options sucj as caching or shadowing. Check with your vendor for any BIOS updates. I suppose I could try to find something that would let me format the hard drive?
View 10 Replies View RelatedI recently had motherboard problems with my computer.Swapped the motherboard for one given to me off a forum.The problem now is that on boot I get past the windows splash and get the BSOD.The error code was just a hex code for which google was not my friend.I could boot in safe mode (without cmd prompt or networking only), but I could not work out what the problem was.I have compounded the issue by using the XP install disc to perform a repair.All that has done is made it so i cannot boot in safe mode at all now due to the setup restriction with safe mode.I believe this is all to do with motherboard drivers that I need to fix.I probably need help in canceling the repair, and how to clean out the existing drivers.I have in the meantime installed Ubuntu to allow access to attempt repair.I would prefer not to have to do a full reinstallation if could be avoided.
View 1 Replies View RelatedI have just purchased and installed a RadiSys Endura EM945G MOBO with my old PATA HDD (Seagate ST38001A) and have hit a brick wall. First of all I put the IDE to SATA adapter on the HDD and applied power and data cables. The drive will not spin up at all. I tried changing the bios (Phoenix Award 5J1R2P34) options for the SATA to every option (combined, enhanced and SATA only) to no avail. Any clues on that would be helpful, however.
to circumvent this and just get the PC running I put the drive on the IDE controller by itself. It spins up and attempts to boot but goes into a cyclic reboot. I suspect it is being caused by the old AGP driver being loaded. This MOBO has onboard PCI graphics so I don't need the AGP driver at all. I've tried every safe boot option but still no go. Back in the old days you could do a step by step confirmation to loads selected drivers. Is that possible with WinXP (SP2)? I could try making a bootable CD and putting the CD drive on as a second (slave) drive on single IDE controller but don't know how I would modify/delete the AGP driver if I did get it to boot.
I have a Dell pc and the mobo just fried and of course I didnt take the extended warranty, so I bought a new mobo (asus) now that everything is back together it won't let me activate. When I use the 800 number they say that the product can't be activated.
View 49 Replies View RelatedCan I replace my motherboard, cpu & memory and expect my existing Windows XP installation to boot up? I realise there may be an issue with XP detectingtoo many hardware changes and insisting on being reregistered, but is that likely to be the only thing?
View 10 Replies View RelatedI have an extremely old computer which I wanted to see if it could boot from USB. I checked the motherboard to see if I could change the boot order to USB but all I could change it too was "Removable Devices" which I then put in the #1 spot to boot. I restarted my computer with my USB drive plugged in, but it booted to XP like normal. Is there a bios update that I can update my mobo too, so that it can boot to usb or is it just too old?
View 11 Replies View Relatedi have an EMAXX mobo EMX-AMD780G-PRO with a maximum ram capacity of approximately 3GB is there a way to released the maximum ram capacity of my mobo?
View 12 Replies View Relatedi have a system that is running xp and i need to format the hard drive due to a new mobo. in the past i have tried and i ran into a problem that you already have an os installed. what is the best way to format in xp?
View 20 Replies View RelatedThe mobo is still good but was getting a BIOS ROM Checksum Error at bootup, then it would go to Reading A: drive, insert system disk and press Enter.After doing a google search discovered that I would need to update the bios got the correct file for the board and the newest flash utility, and am doing it now.But it's been so long since I've done a floppy disk bios update, I can't remember about how long it normally took.
View 33 Replies View RelatedIndependent Dual Boot capabilities on two separate & independent drives, one on the MOBO EIDE controller the other on the VIA SATA RAID Controller on the same MOBO. I am attempting a clean installation of Windows XP on the SATA Drive but the system fails to recognize even the presence of the drive. This, even after stripping the system of all drives except this one, and after 'prepping' it to be bootable with MAXTOR prep. tools.Was there ever a restriction on putting an O/S on SATA drives even on the MOBO? I have all the updates installed, "I think".
View 6 Replies View RelatedWhere can I find drivers for my TOSHIBA laptop A135-S2286 mobo? I cant install the Radeon vid drivers for Xp Pro UNTIL I first install all the mobo drivers. CPUID gave me a cryptic Toshiba IAYAA brand mobo which I never heard of. I want to run XP Pro and right now the Device Manager shows NO vid display since the native vid driver is VGASave which sucks.
View 4 Replies View Relatedi bought a new mobo ram and video card for my comp. when i went to install it everything seemed to work fine until it tried to load windows, every time no matter what i did i seemed to get that blue screen as soon as windows tried to load and then it would automatically reset. i have tried a bunch of things and am stumped, im not sure if its a defective mobo that could be doing this, if anyone has any suggestions id greatly appreciate it.since i couldnt get it working i tried to hook up my old components back together for the mean time. but after everything was hooked up, when i went to hit the power button, the power would turn on momentarily and then shut off. the power supply should be fine since it worked on the new mobo fine, but also if you have any idea what that could be it would be of great help.
View 1 Replies View Relatedhaving trouble with the mobo CMOS settings and ended up rmaing the mobo and the memory. Well i got the new mobo and memory is it loads. When it goes to load XP it gets NTLDR not found or something to that degree and says press ctrl+alt+del to restart. My hd has a partial install of xp and i havent been able do the full install. Was wondering how to do the full install now. I tried popping the xp cd in and it doesnt read it, it just gives me the NTLDR message and wont do anything.
View 1 Replies View Relatedme how much memory i can install on my pc and also what size sticks i should buy
Windows XP Home Edition Service Pack 1 (build 2600) Compaq Presario 5405EA 470032-640 MODEL1
System Serial Number: 4D23KQNTB02G
Enclosure Type: Mini-Tower
Processor a Main Circuit Board b
1.40 gigahertz AMD Athlon XP
128 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: Compaq 073Ch
i had was my motherboard cpu fan not working in its cpu fan pin, so instead i have it hooked up to a case fan pin. I am not sure if this means i have a faulty mobo or not.
I installed my brand new Creative sound card, I installed its software and drivers all fine and the PC restarted fine. Next creative wanted to update the drivers and I let it. After it was done installling the new drivers it needed a restart. On restart I could not even get to the post screen and was displayed with an error saying USB over current, PC shutdown in 20 seconds. At first i could not get past this error at all, so i tried taking out the sound card and putting inserting it again. I did not get the USB error now and was happy.
I played Battlefield 2142 for a few hours then shut it down. Now today when i get home from work and turn it on i saw that USB over current error again and got frusterated. After taking the sound card out and putting it back in I had some new problems. I only saw my Asus Splash screen saying "press delete to enter setup" although pressing delete did nothing, it just hung on that screen.
recently bought SATA 3.0 hard disk(samsung)and i forgot if my motherboard support this hard disk,after checking it only supports 1.5 SATA.I visited samsung website on how to force my Hard disk to run at 1.5
View 8 Replies View RelatedI have the current 32 bit version of XP Pro.
Can I do an upgrade to the 64 bit version of xp, - or do I have to do a clean install of the OS and reinstall all the software from scratch to upgrade?
Can I continue to use my existing XP Home with upgraded HW (i7). Is the MS OS married to the old CPU & MB or will a phone call get the reinstall running?
View 3 Replies View RelatedOn my old comp. I tried to swap P2 350/512 100/2.0V S1 to P2 450/512 2.0V including heat sink and fan.After booting the screen was black with nothing on it , when I removed CPUand booted without any CPU in I had the same result.Reinstalled the P2 350 CPU and everything works fine. P2 450 was taken out from working comp.It looks like both CPU's have slot1 connection and fitted well in the socked.
View 4 Replies View RelatedMicrosoft has advised that there will be a SP3 upgrade for Windows XP, but it will not be released until after Windows Vista is released. Internet Explorer 7.0 will not be part of the SP3 upgrade. It will be made available separately and will be supported by SP3.
View 13 Replies View RelatedI'm currently using windows xp pro. When I install SP2, do I need to backup all the files or is it a easy convenient installation?I mainly use Mozilla but someone else uses IE for one of those online games.
View 3 Replies View RelatedShould I stay with windows xp sp2 or upgrade to sp3.
View 8 Replies View RelatedI want to delete my old OS. It had NT, but i put XP Professional on it now. NT is located on my C drive, while XP is located on my E drive. Can i just delete the windows file on my C drive to get rid of it or what should I do?
View 1 Replies View RelatedCan I update frome windows home to xp pro with a retail ver. of xp pro or do I need an upgrade
View 14 Replies View Relatedso I've found somewhere that sells Windows XP for a reasonable price as an OEM. Now I've been told that that means I have to install from a completely blank harddrive but my PC is around 3-5 years old and my friend says that it might not be compatable with XP. is there any way I can tell as I don't want to buy WinXP only to find it messes up my PC.
View 9 Replies View Related