All of sudden my Dell laptop stopped shutting down, or takes close to 10 minutes to shut down. This happened with no other changes or new software/hardware being installed. It appears to sync with our server fine. I use a docking station, Dell Latitude D830, and take it home with me each day. Sync occurs when I dock in the morning and when I shut down to capture and sync my hard drive and server changes on files I work on at office or home. I shut down and it locks up, I then will hit the main power button and one of two things will happen, it will shut completely down or it will start the Sync process, finish, then go to the blue screen with the Windows Shutting Down message, then stick there
i just instaled win xp and office. everything works ok.just when i shutdown the computer it restart it self as if i just pushed the restart button. that is why i need each time to reset the computer.
The prob is my laptop hang during shutdown..why this happen..?? is cause of virus or problem in the window file system? 4 ur info,im using windows xp service pack 2.
I just spoke to my daughter at college who is having trouble with her Acer laptop, running XP SP2, Intel Celleron, 2GB RAM, and using Zone Alarm Internet Security Suite. When she clicks "shut down" the laptop appears to shut down, but then restarts. "Restart" is not selected. I did a Google search and found a known problem with Roxio Easy CD Creator 5.0 and with Direct CD 5.0, but as best I can tell she has neither program installed (she looked in "programs" folder, and in control panel under "add and remove programs" and couldn't find either listed). I also had her right click "my computer", "properties", "advanced", "startup and recovery - settings", and uncheck the "automatically restart" box in "system failure" section. But her laptop still restarts at shutdown.
My boss has a problem when shutting down his Laptop at work. When he chooses to shutdown it can take up to 10 minutes for it to shutdown and he is really starting to get worked up. However, when he uses it at home it shuts down right away. Can anyone suggest a posible reason for this? His laptop is a Dell with Windows xp. I will be monitoring this thread so if you need any extra info about the problem then drop me a line.
I have a Toshiba Satellite A45-S121 running Home XP Service Pack 2.Computer just started to not shutdown. Tried normal shut down from Start also tried Windows Task Manager shutdown neither work.I have to pull battery to shut it down.
i remote into my XP box everything is fine except when i shut down using a shutdown shortcut and other shutdown utilities no matter what after i get booted off the remote session the computer looks like its shutting down then stays on for a few seconds then a BSOD appear. I have been trying to figure out why for the past week and no solution so im hoping someone can chime in..The problem is only on remote if i shut down locally never a single BSOD and no hardware has changed. No driver issues. ive read and tried all the usual solutions. Need someone here to chime in on specifics.Ive also tried to remote in with bare minimum and no go. same thing.
This is weird. I have to go through the shutdown procedure twice, i.e., Start/Shut Down/Shut Down and click Ok, then Start/Shut Down/Shut Down and click Ok again. It will then shutdown properly. The same thing happens when I try to "Restart." After doing the first shutdown sequence, everything is normal. I can open programs, surf the web, etc. It's as if I never tried to shut it down at all. Only after the second shutdown procedure will it shutdown fully. One note: When I go through the first shutdown sequence, my taskbar pops up and the desktop is darkened. After clicking Ok, the taskbar autohides and my desktop returns to its normal color.I have only had this problem for the last month or two. Before that, all was fine. It's not critical since I can shut it down. It's just annoying to have to do it twice.I have Windows 2000 Pro, SP4, build 5.00.2195.
When attempting to "shutdown" or "reboot", I have to do it twice. When I select "Start" then either shutdown or reboot, my desktop will flicker a couple of times, and then nothing appears to happen. I must select "start" again and then either shutdown or reboot and then they will work as expected.
My pc is running a bit slow lately, got lots of stuff, too much on it.So I'd like to restore my pc back to factory settings. I have around 110 gig of stuff and I don't want to lose it. So I bought a firewire drive to back it all up on. My plan is, transfer all my data to the external hd. Then formatting my hd completley and rebooting as new, then transferring my needed data abck on to my pc.
I've never formatted before so not to sure how. My main worry is the pc not restarting. I have a start up cd that came with my pc but i have no windows xp cd it came pre installed.
I was cleaning virus and spyware from a friends computer, and when all was done, the Run command is now missing not only from the Start menu, but also from the Advance Properties to be able to turn it on and off. I noticed in the registry entry HKEY_CURRENT_USERSoftwareMicrosoftWindowsShellNoRoamMUICache, the key for Run Command was missing, so I created it ("@shell32.dll,-30483"="Run command" REG_SZ)hoping that would solve it, but still it is missing. I re-ran XP SP2, no luck. I installed the free version of Registry Mechanic, but that didn't fix it (though there were things only the full version would fix). I found a reference to this on the site for Prevx1 saying this occurs when McAfee (which was used) only fixes a particular virus half-way, and that Prevx1 would fix it completely. It didn't.
I use Microsoft Windows XP Pro SP3 with Microsoft Office Outlook 2003 SP3.
It has been my experience that, out of the dozen or so Junk e-mails that I receive every day in my Outlook Inbox on my computer, there are usually one or two that are actually not Junk at all, and those I have to identify as "Add Sender to Safe Sender's List" and re-route to my Inbox. It is for this reason that it is very important that all my e-mails are downloaded from the server to my computer - including the ones identified by the software as "Junk" - because the software obviously is not perfect.
A few weeks ago I noticed that I was not receiving my usual quantity of about a dozen Junk e-mails per day. I did not think too much about it at the time, because, although some days I did not receive any Junk e-mails at all, other days I might receive one or even two
My computer was running alright, no viruses or anything. Then suddenly, we turn it on one day and its stuck at the hp screen. Not booting, just with the hp logo. I restart it, and after 2 tries, and some beeps, it boots. Gettin all scared and worked up, I run a spyware scan and a virus scan. I found a few trogans and deleted them. To test it, I turned it off and restarted again. Didnt have any problems. After a few hours it began to beep and got extremely slow. I turned it off. Ever since then, all I've been getting is a blank screen. Its as if its not getting power. The mouse and keyboard dont light up and the screen is blank. If someone could help me out I'd appreciate it. I've searched the forum but the problems similiar to this that i've found involve the pc actually doing something before the blank screen comes up.
I just finished doing a defrag on c drive everything went fine but i noticed it was not completely defragged.there are still a lot of red patchesin the progress bar,any ideas on what might cause this?
I have had trouble recently with a worm on my windows-2000 server, I spent a few hours getting rid of the little blighter, however I now have a machine that will not boot up completely. Being paranoid I have my c partition set as Fat32 and dual-boot so I can boot onto the drive under windows-98 and poke about a bit. What happens is the machine comes up as normal and gets to the "Preparing network connections" - then it just stops there, I've tried safe mode but that's just the same. I've had a look through microsoft's website and checked a couple of manuals to no avail. I get an error message about the application log being full and if this is the first time you've seen it etc etc and also "some services did not start" so things are coming up in the background but I cannot log onto the console.
I'm running Win XP, and earlier today, I decided to start using Win 7 theme. I used the replacer, to replace some XP files with Win 7 ones (including explorer.dll) and I did everything as it was supposed to. After the reboot, my explorer was missing (files, folders, menu bar, everything).So, I open the task manager, click on "New Task...", type in "explorer.exe" and it says: "explorer.exe is not a valid Win32 application". Then, I click on "Browse...", go to C/Windows and there are 2 explorer files. explorer.exe and explorer.scf. When i double click on .scf, it also says that "explorer.scf is not a valid Win32 application.I've been googling for hours now, but haven't found an answer to my problems. And I really don't feel like re-installing or repairing my current Windows.
i have a unsecured wireless network. (dont ask why, but i have now put a password). my question is, the other compouters that are using the internet via the broadband router, do they use the same IP address as my main computer? or they get assigned completly diff IP addresses, not even related to my home comuter. Does this mean, it is a possiobility that other people have taken advantage of my internet (by going on questionable sites), and it is linked to my IP address?
So I try to go to my Volume Control and get this message:"There are no active mixer devices available. To install mixer devices, go to Control Panel, click Printers and Other Hardware, and then click Add Hardware. This program will now close." When I go to my Sounds And Audio Devices Properties, the tabs labled Volume, Audio, and Voice will not even highlight. The buttons that is, nothing works, they're all disabled or something.I guess I'm just having all kinds of problems with this new Windows installation.
I uninstalled winamp but when I right click menu bar still has these options:Enqueue in Winamp...Add to Winamp's bookmark...How do I remove them from my menu?
I am having a weird problem with my windows xp laptop,i don't know what could be causing it so i don't know how to fix it. Ok the problem is constant from start up to shutdown and has been occurring now for about 2 weeks.At first i thought it was a virus so i cleaned my computer but it is still occurring.The problem is this, every now and then my screen will go completely white, its just a display thing cause it happened when i was working while listening to music. it can last anywhere to just 1 sec to 5 minutes. Its constant all the way through but it gets worse if i am watching a dvd or playing a game. What is this problem and how can i fix it? i tried system restore but that didn't work.i think it may be the software i installed at the time but i can't find it in the add or remove programs list to uninstall it.
I am running Windows XP on an E-machines T2385. I had previously loaded the MS Plus! Superpack for XP so that I could utilize Media Player 10 and Movie Maker 2. After several unrelated problems I had to perform a system restore, which was successful. I recently tried to load the Plus! software again and experienced some permissions problems. I was advised by MS to download and use download the Microsoft Installer Clean-up Utility. I was then able to load Disk "1" of the Plus! XP Superpack with no problem. In attempting to load Disk "2" (Digital Media version; w/Media Player 10 and Movie Maker 2 w/ add-ons) I was again prompted to download Movie maker 2 from the internet. Once again it was only available as a download WITH Service Pack 2. I attempted to download SP2, and this time it appeared to proceed smoothly. However, once I got about half way through (as indicated by the status bar) I received the following message pop-up:
"Service Pack 2 Download: Access Denied. OK."
I clicked OK and the following pop-up appeared:
"Service Pack 2 Set-Up Error: Service Pack 2 installation did not complete. Select 'OK' to undo the changes that have been made. OK"
I clicked OK, and a pop-up indicated that various components of the SP2 set-up were being undone, and files erased and deleted. At the conclusion of the removal of SP2 files I received the following pop-up:
"Service Pack 2 Set-up Error: Service Pack 2 installation did not complete. Windows XP has been partially updated and may not work properly."
I was then prompted to restart my computer to put any of the changes into effect. window indicating that a critical update was available. I'm not certain if the update was simply the latest and greatest or somehow related to the problem at hand... but then when I click on the download option/update referenced it proceeds to a point and then gives me an error message stating that certain files needed to be updated before the download could be successful.
This is becoming frustrating. I would think that downloading SP2 with WXP would be an easy thing to do... but apparently not. Please help! Thanks...
recently installed trial version of panda av and uninstalled norton systemworks. my machine shuts down completely for no apparent reason at arbitrary times. the system powers off and i must turn the powerstrip on and off and then press the start button on my computer for it to respond.playing a video from Internet online (a golfing parrot, no less) search c: using explorer for "svchost.exe" run spybot s&d w/ latest enhancements av scan checked the event log, and find the error "7000, svchost.exe could not load security center: name, path, etc. might be incorrect." checked task manager and it indicates 3 instances of svchost.exe running. checked c:winntsystem32 using explorer and could not find "svchost.exe" did a search using explorer and it showed "svchost.exe" in c:winntsystem 32 as well as in one of the service pack uninstall folders just before the system shut down
I just assembled a new computer and installed the Windows XP Professional 64x as the operating system. The computer runs perfectly by itself, but as not many programs are yet compatible with XP 64x, I was wondering if there is any possible way to convert from 64x to 32x without completely re-installing windows. Although the 64x Professional is ment for server use, this is in one of my home machines.
i have a brand new computer from crappy MDG and they have alot of stuff that i cant seem to uninstall or remove and id like to change the opperating system. to be honest i would like to just completely remove xp from the hard drive without having to reformat, i just want a clean hard drive so i can do a completely fresh install of windows xp, is this possible?
I have a custom box and an old gateway box. I wanted to transfer all my files from one box to another, so I rammed in the gateway hard drive, copied all files in the root of the drive, and pasted it into a folder on my New desktop. When the file transfer finished, the folder (on the New desktop) disappeared So, I checked the hidden files in explorer.Not there Well, I used the command prompt. Not there either.After a while, I forgot about it, and just recently got a new defrag program (SmartDefrag).
I recently re installed my OS. Before, when i pressed Ctrl+Alt+Delete, it gave me a completely new screen, where I would have choices like log off, change password, etc. However, now i just get the task manager when i press Ctrl+Alt+Delete. I remember seeing an option to change this somewhere, but i cannot recall from my memory.
I recently tried to run a destructive factory recovery on my desktop HP Windows XP Media Center Edition 2005, which i have done in the past without a problem. For reasons unknown this time the screen was completely blank when it finished. It is as if im looking at a turned off monitor, no signs of any activity what so ever, just a black blank screen. I do not have any type of recovery disc to this computer at this time , though if i get it back up and running that will be the first thing i do. I really dont know what other information I can give about it. The computer is on , the monitor is on but it looks as if it is off.
I think I have a corrupted OS in my hands. My computer worked fine yesterday. This morning I added an extended SATA hard drive. When it booted, Windows XP (Pro SP2) startup seemed unusually slow. After I used the hard drive manufacturer's CD to partition the HD and rebooting, I could not get on any of the limited XP accounts because it required a password when it should not have. I am posting this from Firefox, which with a number of other programs unrelated to Microsoft seem to work for the moment. I think I'm missing system files or they are corrupt. I've recently had a Vundo infection which I did clean up, but now I can't even open Malwarebytes Anti-Malware.This would be extremely horrifying had I not had past computer problems of equal horror. I beseech all you benevolent souls reading this to provide some suggestions. Is there anything I could do aside from reinstalling XP?
AOL internet connection comes with my DELL computer. I don't use AOL so I uninstall AOL and all relating AOL software. However this AOL spyware keep poping up & scanning.
