I put memory on my computer (1GB) after I installed it I get this message ALERT! OS INSTALL MODE ENABLED. AMOUNT OF AVAILABLE MEMORY LIMITED TO 256MB STRIKE F1 KEY TO CONTINUE F2 TO RUN THE SET UP UTILITY
View 8 RepliesI'm not sure what else I can do. My PC slowly derailed into sluggishness, and if I have more than one program open while I am running AOL, AOL runs very slow, and even grays out when I try to connect. The memory I installed has helped, but only minutely. I have plenty of hard drive space left (29gb). I run Windows XP on an HP. I'm not sure what other information you would need.
View 10 Replies View Relatedive installed some extra memory i had 128mb i've now added another 128mb how can i tell if its installed right
View 1 Replies View RelatedI installed 256 DDR in my nephews computer and when I click on the system info..it still says he only has 116 of RAM left (He started out with 128 before I installed the memory upgrade). I assumed it would automatically install.
View 14 Replies View RelatedI installed 512MB PC3200 to my Windows XP Sony Vaio PC. The little white clamps clicked into place.
when I right click to see the system summary, it still says 502 RAM. I thought it would read 1 gig (?)
Is there something I need to do?
Do I take ut the old memory and then add two (new) more memory chips to increase the memory? Or do I just put in an additional memory chip?
Alright this has left me without my dell for a few months now and its driving me nuts.I was trying to format my computer,and than install winxp.i wiped it,and tried installing winxp from my cd, Everytime i try to install,it says it couldn't be installed due to not enough memory left,or my disc being corrupted,it cannot be corrupted because i have installed windows xp on this computer using the same cd.
View 14 Replies View RelatedI have been getting the blue screen of death on my Dell Inspiron 600m running Windows XP Home Edition Version 2002 SP2 w/ Intel Pentium M processor 1600 MHz 299 MHz, 1 GB of Ram (only hardware not factory - installed recently). I was given this laptop as a Christmas gift as the donor received a new one on boxing day It was given to me with this error and I suspect it is from the new(er) memory installed but cannot be certain as I have no references to go on. I had enough of this reoccurring error very quickly so I reinstalled the OS clean and fully updated the system with Microsoft updates including SP2, the computer also has quite a bit of expensive software I installed and is virus free according to trend micro IS PC-cillin 2007.The memory that came out of this unit is in with the laptop bag stored in the new memory packaging, the new memory is: Times Two(2) units = KTD - INSP8200/512 (512MB Memory Module) Equiv. Dell(R) P/N: 311 - 1356 (Sodimm DDR Inspiron) whatever that means! The old memory that was removed says: Again Times Two (2) units = Infineon HYS64D32020GDL-7-B 32M x 64 SDRAM - B2V40212332G - PC21000S-2033-0-A1 - 256MB,DDR,266,CL2
View 14 Replies View Related"There is insufficient memory or disk space. Close extra windows and save your work." It's the message that I keep getting when I try to paste some pages of a book from Internet onto WORDS 2000 on my Laptop DELL INSPIRON 9300 with OS Windows XPPLEASE HELP ME TO FIND A CURE FOR THIS
View 6 Replies View RelatedI have a white box Pentium 4 CPU with XP professional service pack 2 build 2600 installed. The motherboard is an intel D865GLC with 512 MB RAM installed in Dual channel mode with 1 256 MB stick of ram in slot zero of bank 1 and 1 256 MB stick of ram in slot zero of bank 2. This memory is dual channel compatible. I tried to add another 2 sticks of the same type ram but from a different manufacturer.
Here's the problem: I can use any 2 of the 4 sticks of ram together, both from the same manufacturer or 1 from 1 manufacturer and 1 from the other for a total of 512 MB. Everything works fine. I can place one stick in slot 0 of bank 1 and the other in slot 0 of bank 2 or I can place 1 in slot 1 bank 1 and 1 in slot 1 of bank 2 with no problems. I can even place a 3rd stick of the same type ram in any open slot and all's fine (except the machine complains that this is not an optimal memory setup). Memtest86 reports no errors with any of the above configurations
I have just got Red Alert Comand & Conquer on my Windows XP and whenever I try to play Red Alert I get this message; The procedure entry point SMapLS_IP_EBP12 could not be located in the dynamic link library KERNEL32.dll.
View 10 Replies View RelatedI have started to get the attached alert on an occasional basis on my laptop.If I click OK it goes away and does not seem to have any effect. Does anyone know what this means ? I run Win XP/2 home1.2 GB mem 60 GB.
View 2 Replies View RelatedOften, when attempting to download a particular file, I will get the Security Alert message: "Your current security settings do not allow this file to be downloaded." For example, this message appears when attempting to download IE 8 and regardless of the security settings, firewall on or off, etc.
View 4 Replies View RelatedI keep getting asked for file pro11.msi always but i can't find it anywhere.
View 10 Replies View RelatedI recently just built this computer so its still all pretty much brand new. Im not really sure what is making it reboot but it seems like im always playing a game when it decides to do it. After somone else suggesting it was the ram i decided to check my ram with memtest86+ and during the scan my computer rebooted itself pointing that it was prolly the ram. So now i am using my old ram while the other 2 gigs is bein sent back for return and the computer rebooted itself on my old memory so now im pretty sure its not the ram. I understand that it could be numerous things such as a loose wire,drivers,crack in motherboard but it would be nice if the problem could be determined or atleast narrowed down.
View 5 Replies View RelatedLately I noticed that there is someting wrong with my computer, I got so many errors problem, that I dont have enough memory or Iexplorer.exe can not open, also there is an icon by the adress bar that replacing the IE icon , Please take a look at the attached pic marque In red.
View 14 Replies View RelatedI bought my Dell Inspiron 9300 (1.86 Ghz Centrino, 1.0 GB RAM, running Windows XP Media Center Edition [stupid, I know that now]) in August of last year. It was really high-end then, the idea being that by the time I finish college it will still be... enh, adequate.Upon installing Google Toolbar and adding the System Monitor gadget, I discovered that even when I have just turned the thing on it's using over 60% of its memory (RAM). If I am using Yahoo! Widget Engine, that figure jumps to anywhere between 67% and 80%. This is rather unsettling, because the computer has 1 GB of RAM. How can my computer, at rest, be using over 600 MB of RAM? Is there a way I can take that down?
View 10 Replies View RelatedThis is the alert: (more or less)Exception...Component Manager::Create Instance returned failure code:" nsresult 0x805700015 (NS_ERROR_XPC_CI_RETURNED FAILURE)" location: jsframe::chrome://searchshield/content/overlay.js::InitSDK::line352" data:no The only thing I have done lately is to remove a program I found in my list of programs which was something like Microsoft Visual C++. I rebooted after I removed it.
View 8 Replies View RelatedI am using the windows XP OS and each time some alert messages appear there is a sound.I have set my speakers setting to "no sound" mode. Still the sound appears.
View 9 Replies View RelatedWell just recently. I was sitting there letting aim run. I went to use the bathroom and my pc was off. I was like huh. So I left it off that night I didn't need to get on. Well when I did turn it on, it brought up this error/alert.Alert! Your computer has shutdown due to a thermal error.Press F1 to continue or F2 for system setup.
View 6 Replies View RelatedThe CPU fan for my Dell Dimension 2350 desktop computrer stopped working and I got the BIOS error "Alert: CPU fan not detected". So I replaced the CPU fan and the fan works good but now I get this error message when ever I turn my PC on. When I press the power button, I get the Dell logo and I get the Phoenix-Award BIOS screen with the error message "Alert: CPU fan not detected. Press F1 to continue,F2=SETUP,......". When I press F1 the system continues to boot fine and the Pc works fine. My CPU is cooling fine also.
View 5 Replies View RelatedCan MSN Messenger be configured to sound off only when selected contacts sign in?
View 2 Replies View Relatedwhen i am accessing any secure site.the security alert pop -up come up ,i donot want that pop-up how to block security alert popup?
View 2 Replies View RelatedI definitley have some sort of virus on my computer and all sorts of pop ups keep coming up on my computer encouraging me to buy a program. I can't get to any other websites besides the one for this program as an alert pops up on the browser sayng my computer is infected. Also everytime I try to open a file a "Windows Security Alert" pops up and says that whatever file I sm trying to open is infected. This is a probloem because I have tried opening task manager, system configuration, and even using the run function wiuth different commands and nothing will open! I also tried downloaging Ad-aware on my external harddrive and then running it from there but it won't open either!
View 2 Replies View Relatedim am getting a windows security alert that says windows firewall is not on ,but when i goto turn it on in the control panel it says its already on???
View 17 Replies View Relatedi realy need some help, my compaq EN series won't accept my memory upgrade, i don't know if it's compatible, iv tried to research it, but im only new to computers, iv did research it and purchased what i thought was the right module but now my PC will not accept it
my PC is a Compaq deskpro EN, with a three slot memory motherboard,
two of the slot are occupied
slot 1: 128MB non parity SDRAM PC133
slot 2: 64MB non parity SDRAM PC100
this brings the total memory to 192MB, and has been running purfect since i bought the PC, but then i tried to upgrade with a Slot 3: 256MB non ECC SDRAM PC133
bringing my PC to a total of 448MB of a Max 768MB, and my PC accept that mudule when it is switched on (press F1 to accept new memory... or something like that) .
The computer is slow to load windows 2000. Takes several mintues to connect to the net. Message showing that "Virtual Memory is low". Have gone into "My computer" - then "advanced options" and increased virtual memory to 1500. There is a good amount of space on the disc. But actions made no difference and still get the message that the virtual memory is low. Speed of computer has not improved.Will try "System restore".
I got a machine here-its a presario 5190. It has 2 instances of XP installed, and it wont boot to either one. The owner said he tried to install a printer, and then when he rebooted, it got caught in a loop, and just contnues to restart itself. It wont start in safe mode, and it wont start with the last known good configuration. I tried a repair install, but that didnt seem to work either. It just reboots endlessly, right after XP starts loading. I suspect the computer does not have enough memory for XP. I believe XP requires a minium of 256MB, and I believe this has only 192 MB RAM. I believe that the best option is to reformat, and install Win 98. The guy that owns this even have it on the internet-just uses it for his trip planner.
View 5 Replies View RelatedI am running Windows XP on a Quad core with 3 Gigs of RAM. I am a musician and use the computer for recirding and mixing. My computer was upgraded a mere 6 months ago and has not had performance issues.However, in the last month I have noticed it slowing down with the hard drive working very hard. Now things are even worse. I cannot load sound samples such as drums as the computer keeps claiming that it is out of memory.I have run adaware and Spybot for spyware. I have defragged, virus checked all to no avail. One thing I should mention is that my two data drives are very low in memory.
View 6 Replies View RelatedI have heaps of space on my hard drive, have defragged etc. Got windows XP and SP2. In system info it says I have about 30MB available memory out of 256MB. This doesn't change much if I disable start up stuff in msconfig. In task manager I have 29 processes running leaving 62144 available physical memory out of 196080. From other messages here this doesn't seem like too many processes running.
View 4 Replies View RelatedWhen i am going to start Tiger Wood pga tour 2003 it's comming upp a box where it stands: Direct x has found to little Video Memory to play the game.
View 2 Replies View RelatedOn the specs for my computer that is attached to the side, it says that my computer has 11 MB allocated as video memory. But, for some reason, when I last looked on my computer it said that I only have 4MB allocated as video memory. Why is this? And is there any way to bring it up, maybbe even past 11MB?
View 8 Replies View Related