ICQ Startup / No Connection
Aug 12, 2002
It seems lots of people are having problems with ICQ and WinXP not finding a network/internet connection upon XP startup (especially those on DSL modems like myself, or those with LAN/T1's, etc.)The Problem is that when XP loads, ICQ pops up and says "no connection detected". This occurs despite the fact that 'Net Detect Agent' and 'automatically connect to internet when no connection present' are checked. The previous solution was to move Net Detect Agent *out* of the Startup folder, put a shortcut on the Desktop, and use that when you wanted to connect.I was browsing through the boards here and came across a thread discussing this problem: http://www.tweakxp.com/tweakxp/board/topic.asp?TOPIC_ID=245They did not come across a solution, however it did give me an idea..I tried it .. and it WORKS!! Read on...Here's how to do it (am using WinXP Pro):1. Go to the Group Policy Editor (Run->"gpedit.msc")2. Under 'User Configuration', click "Administartive Templates"3. Click 'System'-> 'Logon'4. In the window on the right, double-click on "Run these programs at user logon"5. Make sure 'Enabled' is checked, then click 'Show'6. You'll now want to add ICQ's Net Agent Detect to the list (which is probably empty unless you've already been in here). To do this, first locate on your HD the exact location of 'NDetect.exe'.Example: C:InternetICQNDetect.exe Click 'Add', then type the filename & path of the above file7.
Click 'OK', 'OK', and 'OK' again to exit.The next few steps are important: 8. Now make sure that there are NO traces of ICQ or Net Detect Agent in your Programs->Startup folder. If there are, delete them from Startup.9. Start up ICQ, and go to 'Connections'(Main->Preferences->Connections->General tab). Under 'Launch' make sure 'Launch ICQ at startup' is NOT checked.10. Click 'OK'. Disconnect from Internet if connected.REBOOT.If everything goes properly, you should now see the Net Detect Agent appear in the system tray as WinXP starts up the desktop. When you connect to the Net, it magically disappears.. to be replaced with the ICQ 'flower' which will shortly find a connection and voila!
View 9 Replies
ADVERTISEMENT
Feb 25, 2005
I've done virus/spyware etc. scans and it's all clean first of all.I used black vipers startup guide to trim down my services that start on boot and it seems to go pretty quickly and that's all fine.Then when I try double click the icon that brings up my dsl connection it pauses. There doesn't seem to be any disc activity, but when I bring the cursor to the taskbar it turns into an hourglass so obviously it's waiting for something.I've brought up task manager during this and I see that it's loading some more avg components as well as imapi.exe which appears and then disappears.
View 5 Replies
View Related
May 25, 2006
my cable is not working properly.Every 15-20 minutes my internet connection is broken even though the modem is online and there is no problem with the cable coming into my house. I have to reset the cable modem and then it works for another 10-20 minutes until the next cut. Ive had this problem before (last time i changed computers) but cant remember how it was resolved. I already talked to my ISP support but these guys are brain damaged or something and cannot even comprehend my problem and all 3 actually concluded that i had somehow contracted some killer virus immediately after connecting my computer and this virus was the root of my problems
View 14 Replies
View Related
Aug 18, 2006
I go into network connections, then I try to disable my lan connection and enable my wireless and bamm."Error Disabling Connection- It is not possible to disable the connection at this time. This connection may have one or more protocals that do not support Plug-and-Play".
View 9 Replies
View Related
Oct 22, 2008
I have tired to get rid of this bridge connection that is on my local area connection. I try to remove it with the bridge connection area and all it says is "To create a Network Bridge, you must select at least two LAN or High-Speed Internet connections that are not being used by Internet Connection Sharing." I have AT&T hig speed internet and tired talking to them and they said it was on my end, plus I spend two hours on the phone to someone who doesn't know much english and not alot about computers. So can someone please help me. The only way I can connect to the internet is through the my D-Link router which sucks
View 4 Replies
View Related
Feb 28, 2008
i havn't (Local Area Connection ) in network connection in my computer why ?
what I must to do to make (Local Area Connection)?
View 2 Replies
View Related
Jun 24, 2005
I recently reinstalled Windows XP Home on a friends computer, but when I went
to create their dialup connection to the internet, I couldn't.I went into the 'Internet Connection Wizard'. Told it that I was connecting directly to the internet. Then I told it I was going to set up the connection manually. But whenever the option comes up to setup a dial-up or broadband connection, the dial-up option is greyed out and unselectable.In device manager, it shows my modem as being fine. It's installed with no conflicts.
View 2 Replies
View Related
Apr 13, 2005
I got a Toshiba with windows XP.. Its an older laptop and runs slow.. which is fine for what i need it for.. It is connected through a Dlink Cable modem. Recently moved and had a DSL connection of 3 years no problems. Had to switch to cable broadband. The lights all light up solid no problem. Network cable connected to no problem. Problem : NO internet
Unplug netowkr cable from cable modem (get the network cabled unplugged in windows, so it is seing the modem or atleast talking to it)Tried using the windows xp network srtup wizard. I did that hub one (connected thourhg a hub) and i tried the direct connection (goes from modem to computer).
View 1 Replies
View Related
Jul 11, 2005
I've been trying to use Remote Desktop to connect from my home computer to my office network's machines. I've followed all the instructions except for the part where it talks about getting a "virtual private network connection". Not sure if I have this part done right. Not even sure if this is the problem. Is there something that needs to be set up before being able to connect from a home computer to an office machine?
View 3 Replies
View Related
May 16, 2007
I want a program to run at startup and I want to be able to change what I have done at any time.
There are a number of unchecked entries in msconfig and I have to use Selective Startup all the time.
If I want to revert to Normal Startup under the General tab instead of Selective Startup, the program's box automatically rechecks itself in Startup.
The Startup tab gives me a handy record of what I did and allows for an easy change of mind so long as I continue to use Selective Startup.
If I edit the Registry to stop programs running at startup, they won't show in msconfig and I lose the handy record of how it was and I may have to reinstall the program to go back to it running at startup.
I would like to accomplish this:
1. Use Normal Startup instead of Selective Startup.
2. Have some programs not run at startup, but be able to easily change back to having them run at startup.
3. Have a readily accessible list of those programs and the details as shown under the Startup tab as a reminder of how it was without having to manually enter it all into a text file or keep a notebook or reinstall.
Is there some way to use Normal Startup, stop programs running at startup, but retain or find a list of those programs (including the details under the headings Startup Item, Command, Location) that is shown when using Selective Startup with unchecked boxes under the Startup tab?
To put it another way, use Normal Startup but somehow retain the convenient flexibility of Selective Startup.
View 7 Replies
View Related
May 8, 2010
My startup time went up drastically.
I have disabled all but two of the automatic startup items using msconfig. My system used to start in less than two minutes, easily. Now it takes a more than a minute or two longer than that.
I know what the problem is; the only three items that show in the system tray after startup are:
1) The AVG Antivirus icon .
2) The Spybot SD Resident icon.
3) Local Area Connection (This is the icon which shows two computer monitors with screens that light up and go dark periodically)
Now, after the problem started, the last item, the Local Area Connection icon is the one that doesn't load, for VERY long. So it may be something to do with that. Also, just before the icon finally shows up(after which point the computer is fine to use) I've notice that a Windows security notification icon appears...it flashes, for just a second, and then is replaced by the Local Area Connection icon. For the record, these are the two icons I'm talking about:
http://i131.photobucket.com/albums/p282/sw1sh1/LAC.jpg
http://i131.photobucket.com/albums/p...tification.jpg
I have had my automatic updates disabled for a while now, so you might think that that's the reason the notification is showing up but I've already disabled that notification using Windows Security Center.
View 14 Replies
View Related
Jun 10, 2010
Try making my laptop less slow and not freeze all the time when doing the simplest of tasks.
However, my problem happens after trying to disable the Startup Items from the MSconfig dialogue.
-After I have unchecked the boxes I don't want, I click OK or Apply;
-It then tells me I have to restart for the changes to take place, so I do this;
-Then after completing its restart a message says that "The System Configuration Utility is in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts up."
-it then opens the MSconfig dialogue box again.
If I just close the utility or click ok, sure enough it keeps on opening every time I startup. Or else, what it's trying to convince me to do is to start up in Normal Mode. But I won't do this because then all the Startup Items I'd disabled become enabled again and the whole lengthy task was a waist of time!
View 1 Replies
View Related
Sep 3, 2005
The run link is missing from my startup menu...can anyone help me find it? I know this sounds dumb, but I really need to restore it to my startup so I
can take care of some other problems I'm having.
View 2 Replies
View Related
Dec 25, 2005
How do you remove the "Common Startup" items from the startup list in msconfig for Windows XP? I did locate and remove the "Run" items that are located in HKLMSoftwareMicrosoftWindowsCurrent VersionRun.
View 6 Replies
View Related
Jun 21, 2006
Win XP Home edition. I'm in the Speed Up Windows Startup class. I currently have a very long list of startup programs running. Is it safe for me to disable all except security programs (Symantec Norton,AdAware,Spyguard)?Charles
View 6 Replies
View Related
Feb 10, 2010
I think I might need to do this.It's now impossible to click or d/click on a programme or even an email and have it open I have to click 6-10 times before the little hourglass appears.I think I need to change my startup : what do you think? Msconfig shows my startup options to be -Normal Diagnostic Selective
Ought to to choose diag?Or Selective?because I can't decide which programmes I ought to remove and which to leave in, but I'm sure I have too many.
View 14 Replies
View Related
Apr 27, 2006
My sister's computer is running very slowly, particularly at startup (which seems to take forever). I've got Panda antivirus software running and do reasonably regular spyware scans with AdAware, but am not sure if the problem is just that the computer is old with too little memory / overheating because it's on almost all the time / something else I haven't thought of. To help me determine what's going on, could someone much smarter than myself take a look at this HJT log and see if you see anything of concern?
View 14 Replies
View Related
Jan 8, 2005
The problem is it takes an incredibly long time to startup because of these, once we close them it gets back to running fast, but until then we have to wait for them to open. I think it's causing the problem because we didn't have this problem until we installed this.How do I make it stop starting up on Windows XP? I sped up my startup on my computer by stopping useless things from running.
View 4 Replies
View Related
Feb 27, 2007
I have just checked the 'connections options' and found that the box 'always dial if a network connection is not present' has been checked. Am i right in thinking that the 'always dial my default connection' box should be checked instead? or doesn't it make much difference? (I am usding Windows XP home) A friend of mine set up my email up for me and I am using 'Orange' as my ISP. For some reason he has put 'Orange anytime default 2' instead of just Orange. I hope this all makes sense?
View 2 Replies
View Related
May 18, 2005
What info do I need on the server side to allow access to the client computer. I know in xp (the server) in this case, you can allow users access by adding them and giving them access. Just wondering what kind of info I add on the server side for the client to have access.. Do i put in the client computer name, workgroup or Ip address? Internal IP address or external? I'm basically trying to setup a connection to allow me to use remote desktop from work to access my home PC. Home PC is using xp pro and work PC is using Win98. I've already setup the VPN connection at work (win98), just need more info on setting up the Host PC. Like what exact info I need from the client PC, to add this info to allow access to my Host..
View 5 Replies
View Related
Jan 13, 2005
When trying to make a new VPN connection with XP the options about "dial-up"
and "vpn" are grey. Whats up?
1) Create new connection
2) Connect to the network at my workplace
3) now the "dial-up" and "vpn" are grey
View 3 Replies
View Related
Jul 1, 2005
on the connect box, it asks me for user name & password, is this for my
company's private network? if so, then what is it & where can I get this
information.
View 1 Replies
View Related
Jul 14, 2005
I have a Linksys Router WRT54GS with latest firmware v4.50.6.
I have IPsec, pptp, and l2tp passthrough enabled with port 1723 being
forwarded to the correct ip address. I have disabled all firewall
software. I try to establish a vpn connection to myself using the local
ipaddress and it gives me error 800. Likewise, using my wan ip address
fails also. Anyhelp setting this up would be appreciated. Thanks
ps ipsec services and remote access services are enabled and started.
View 3 Replies
View Related
Sep 7, 2005
My PC is Windows XP Home edition Service Pack 2
I installed Cisco VPN (Virtual Private Network)
client 4.0.3. Order for the Cisco VPN client get
connect, I have to disable the Windows XP firewall
first. Why is that? That is NOT cool to disable the
firewall.
How can I connect the Cisco VPN client without
disenable the firewall? Do I need to upgrade
the Cisco VPN client? What is the latest version
out there?
View 1 Replies
View Related
Feb 25, 2006
dial up connection of windows xp is too big i cant find how to resize as normal?
View 5 Replies
View Related
Dec 11, 2005
I keep getting this pop-up "Dial-up Connection" box. I have cable internet connection and it's very annoying. Something has infiltrated my computer any ideas how to stop it?
View 1 Replies
View Related
Aug 20, 2006
I'm having problems with my LAN connection and router.Although the LAN connection is connected and firewalled, the router is on with all the lights working, i cannot get on to the net. When I open my internet browser to go to a web page it begins to search for it, however then displays page cannot be displayed message and informs me that the server cannot be found or a DNS has occurred.Sometimes i get a bubble pop up saying limited or no connectivity.
Before the connection stopped working, my main computer was connected directly to the router and there were two laptops also using the router wirelessly. However now none of the computers can access the net The connection works if i remove the router and use a broadband modem.I cannot configure my router as no instructions came with it relating to its use and after numerous attempts at contacting the manufacturers
View 2 Replies
View Related
Oct 4, 2005
Ever since I have rebooted my whole machine the Internet runs very slow. I mean very slow. Everything else of the computer works fine but this, I'm sure it is not virus that caused this.
View 1 Replies
View Related
Jan 29, 2006
I have a pc with windows XP, with over 700mb Ram, 80gb hard disk space and not many programs running. My video program is NVDIA GFORCE4, and my internet connection is by DSL. Yet whenever I'm online for the past 6 months or so, my pc is very slow and whenever I go to Yahoo Games I basically just freeze up for several minutes. Yes I've got Java programs running, many anti-spyware and antispams running, plus AVG antivirus. I even re-installed and nothing seems to work. Can anyone help me please? I've tried everything and can't figure it out. I even had different laptops on the same connection - the problems seems to be the same but a lot less than with the desktop, and with a friends laptop it was nearly normal. My pc is over 2 years old but the problem only cropped up about 6 months ago and I can't figure it out.
View 15 Replies
View Related
Jan 13, 2006
My pc has a slow connection so i thought i'd clean it up. when i ran hijackthis i checked all the boxes, clicked fix and got a protection error near the end of the list. when i restarted the pc i tried again and after clicking fix watched the curser get towards the end again, and on the 180 search assistant entry there i got the same protection error.then i tried it again with 180 search assistant unchecked, and it freezes on the entry before that one.is it bad to check all of the boxes? doesn't it basically just set the browser back to original?
View 14 Replies
View Related
Feb 18, 2006
I've got 2 Identical computers...WinXP Pro SP2...and I'm trying to set up a wireless connection. Just got the router (Belkin F5D7230-4)set up downstairs and after alot of BS it's working fine, I've got the matching wireless PCI card upstairs and can't get any available network! As a matter of fact....I had a hell of a time installing the card...my MOBO just didn't want to recognize it! I'll break off here so anyone that's had a similar problem can reply.
View 3 Replies
View Related