My Sony Vaio laptop running XP Professional suddenly one morning wouldn't boot up. Ctrl-Alt-Del will restart but goes no further. I can enter BIOS during this process, but nothing else responds. Can I get to a command prompt through bios in order to attempt a restore?
View 6 Repliesonce the on button was pushed, it came up with the BIOS screen asking for the password.I removed the CMOS battery, which allowed me to change the Password so I can get onto BIOS now. However, when I boot now it just comes up with the BIOS screen.I set HD to boot first, aswell as setting the clock and date. I then ask it to save and quit, after which it shut's down, and reboots, only, BIOS keeps coming up. And I need to get this sorted asap
View 14 Replies View RelatedI have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
View 5 Replies View RelatedWhen I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
View 1 Replies View RelatedGot a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).
View 5 Replies View RelatedIm new to PCs and since my motherboard is three years old is it a good idea to upgrade? I contacted the maker of my motherboard and they say an upgrade is available and sent it to me for { DON'T CRACKUP} $49.00. I already read that you can really mess up your PC if you do one thing wrong when upgrading. Am I a fool for buying the upgrade? Please let me know as I can send the Floppy discs back.
View 2 Replies View RelatedI have ibm thinkpad R51 2887 nq2 series .My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.
View 1 Replies View RelatedI just flashed/upgraded my BIOS for my motherboard, and now XP doesn't even boot up.
After the BIOS load, I get a "MBR error 2" message and it just stays there.
My board is an Asus P5N32-SLI SE Deluxe. I used the Asus Update Utility to flash my BIOS.
i have a problem with my Acer Aspire 4732z. Press <F2> to enter SETUP).i must press anykey twice to load the window(i'm using window xp pro).i think it cause by System BIOS shadowed, i want to disable it..but there is no option.
View 2 Replies View RelatedMy problem is my OS, which is XP home is seeing my master HD as a 20gb drive when it is actually a 40gb drive my slave is a 20gb drive and it sees it as 20gb. The BIOS sees the master as a 40gb drive and the slave as 20 gb.
View 2 Replies View RelatedI keep trying to access BIOS by tapping F2 or DELETE or F10 but the boot continues like no keys were tapped. Except for that, the computer functioning normally. Can someone tell me how to change it back to normal.
View 14 Replies View RelatedI have a dell workst precision 470 dual xeon, 3gb , 160gb maxtor hd sata 150 with win xp pro.created the floppy with PROBABLY THE RIGHT CONTROLER driver and pressed F6, then it was only one option in the list so i did that then, CONTINUW with an oem cd win xp pro spk 2, then at the WELCOME TO SETUP screen, i selected the "TO SETUP WINDOWS XP now press enter" then i got on the screen this Message: "Setup did not find any hard disk drives installed in your comp. make sure any hard disk drives are powered and properly connected to your computer and that any disk-related hardware configuration is correct this may involve running a manufacturer-supplied diag or setup program.set p cannot continue to quit setyp press F3".I have tested the hd with dell diag. tool and al test pass, i believe has to be that the mate boot record has been corrupted or a virus, the thing is i can not even run R console or the Repair/install cause of the above message, is there any suggestion to add this hd to another computer and be able to check the boot.ini and see what is wrong, this is a hd with only one partition, but the problem i have or the one that was created is cause i had a laptop hd that i could not make boot in the laptop so i took it and added to this comp. to the ide 1 controller and then i ran defrag on it, this one has two part c and d so c was the os and d was for other applications, i ran the defrag on it , then i did not remove from the device manager i just simply turn of the dell machine and Physicly remove the laptop hd, then when i was trying to boot the dell 470, i got the the stop error:"STOP: 0X0000007B(0XBA4EB524,0XC0000034, 0X00000000, 0X00000000)", so i think the Boot.ini file is corrupted, the machine is confused or the sata controller driver got corrupted, i am wondering of any sugestion about modifiying the boot.ini file or FIXMBR how in my case, i don't want to reformat the hd .
View 2 Replies View RelatedI dug around some before posting, but I couldn't find anyone having the same problem as me, and I'm hoping this is the most appropriate forum. I apologize for the length, but I wanted to post everything I thought might be pertinent. I was playing Guild Wars when my GeForce 4 Ti4400 died. I got a working Radeon 9700 from a friend (he was using it up until the moment I got it, and I ran AquaMark 3D on it) and ran into only a billion problems. When I performed certain actions involving the online video game Guild Wars, my computer would suddenly reboot with no warning. I adjusted "reboot on error" in the system properties. It no longer rebooted, but instead, I got a solid blue screen (no words, just a blue screen), and I had to hold the power switch down to turn off the system. I suspect that troubleshooting this BSoD problem and putting my system through that repeatedly probably messed up some settings or something. The last thing I did to my computer was install the ATI Catalyst 7.8 display driver only (I was testing out the various driver releases one-by-one to see if any of them fixed my BSoD problem). It installed, asked me if I wanted to restart, I clicked yes, it began restarting, froze at a black screen (not the first time I had that problem since all my video card/Guild Wars problems), I once again held the power switch down to turn it off, waited a few seconds to turn it back on, and since then I have had the error described under the "Current Problem" heading above.
View 3 Replies View RelatedHewlett Packard PC. Hangs on start up at HP Logo window so I planned to reformat/reinstall XP Home Edition.
Pressed F1 to get into BIOS and it displays the words..."entering Setup." but it just hangs there never lets me into the BIOS.
Since I have had my comp (going on 4 months), when I boot i get a message saying BIOS is not installed, which i find very hard to believe, but this never affects anything. today when i boot my comp, it starts loading and its:scaning IDE drives then it says something about BIOS not being installed (but it was a slightly different message, i didnt have enough time to record it). then i get some weird screen, it gave me the option of entering setup by pressing F1 or loading default settings by pressing F2. i rebooted, again the same message, so i just chose to load default settings, and everything loaded, but when i got to loading windows, i loaded it and then it crashed, the comp just rebooted. then i followed the steps again and loaded default settings and it loaded fine. i know i cant give details about the error screens as i didnt have time to record them, but what should i do if this happens again?
View 14 Replies View Relatedi bought a ASUS motherboard about 8 months ago its a A8V Deluxe i believe and when it boots it says detecting BIOS then a bunch of. then it says BIOS NOT FOUND!
View 2 Replies View RelatedBrand new intel p4 has issues. Please help. it shows the intel p4 screen, start bios then gets a few 95,BA, 94, E9. Then gets a long consistent beeping noise. It sounds like the bios is messed up.Under system summary,says sys manufacturer intel system model D945gtp system type x86-based pc
View 9 Replies View RelatedHow can I download a new BIOS for my xp home premium?
View 9 Replies View RelatedHow do you get into your computer BIOS to change it. On one post it said to
hit F8 but when I do that the computer just clicks?
How can i boot from a cd with a BIOS that doesn't support booting from a cd, the only options that it gives me are A & C drives to boot from. i know that it can be done.it's just that i lost the disk that i had the program on, i don't have the download of it and i cannot find it anywhere on Google.
View 6 Replies View Relatedmy computer was running totally fine until i was converting some videos with itunes for my itouch and then the itunes froze the comp. it did the freeze i restarted the computer but ...nothing. i can't even get into the bios screen! everything powers up fine so i know its not the psu. I've tried removing extra hdds and starting with just the main hdd and removing all peripherals except monitor but still nothing. there is no resposnse form the hdd after initial power up. i noticed that the activitiy light remains dead after the initial power up. i hear the hdds spinning but nothing is happening. i dont understand why it wont even go into bios screen...i can see and hear the cpu and vid card fans spinning so i know they are getting power
P4 @ 3.2 ghz
windows xp pro sp2
ATI radeon with 128 mb
2gb ram
asus mobo
WD raptor 74 gig (OS) -sata
maxtor 120 gig - ata
seagate 300 gig - sata
psu is 500w
I am trying to set the boot device for a thinkpad T23. Nothing is password protected. When the BIOS setup CDROM is top, with no + next to it, and followed by hardrive and them removable. HD and removable does have a + next to it. CD is bootable, why won't the thinkpad boot from the CDROM?
View 2 Replies View RelatedI have a new Asus P4S800D-X, Pentium 4, 3.0E, two matched 160G, SATA hardrives.
I can not install the OS.
I can not get past the BIOS installation and set up.
When I apptempt to install from the CD I get an error message stating an error reading disk and I am asked to restart.
I have set and reset the jumpers on the CD and CD-RW optical drives.
The BIOS has set the hard drives to RAID 0 configuration.
I am not sure if this is a motherboard, optical drive or disk drive problem.
Brief explanation. I purchased a generic brand laptop and loading xp myself. I had no problems whatsoever until I bought the game Medival II. While I was playing the game, as I had before, it suddenly froze my laptop. I was forced to turn off the power and restart. When I did that, I was able to see the bios screen and enter bios which still seems to recognize everything correctly in the laptop. But when getting out of BIOS system restarts. Just a black screen. I finally got to the point that I decided just to reinstall. Upon attempting to do so, I get the following error message after it attempts to load
View 3 Replies View RelatedI have tried putting my computer on stand by, but the hard drives never turn off. The screen does, so is there a way to make alterations in the Bios to allow the discs to shut down as well.I used to Hibernate, but since changing to always on Broadband connection it will never restart with the pointer being able to move. So I have to close it down completely when I no longer want to use it.
View 4 Replies View Relatedi have a very serious problem with my pc when i start my pc it satys on dos ,and messages shows like press F1 to continue or press del to enter the setup now when i presss f1 it start the windows fine but when i press DEL nothing show up just a black screen thats all now problem is i cannot get to Bois setup to work it out
View 4 Replies View RelatedI have 2TB SATA HDD for storage purpose and one SATA HDD for my OS, how can i setup my bios to be able to boot to my OS?
View 1 Replies View RelatedI have 2TB SATA HDD for storage purpose and one SATA HDD for my OS, how can i setup my bios to be able to boot to my OS?
View 2 Replies View Relatednot to enter bios setup
View 1 Replies View RelatedRunning a Dell XPS710. Was on the phone with tech support and had to go into setup to check on something. after I got off the phone, I rebooted and tried to access setup and can not. I don't know if I accidentally checked off something that won't allow me to use the keyboard until the machine boots into windows because pressing F2 (Setup) or F12 (Boot Options) when the Dell splash screen appears won't work. It just goes into Windows.
View 2 Replies View Relatedi cant access bios on my laptop and my laptop wont bootup.
View 2 Replies View Related